TweetFollow Us on Twitter

Thinking Logically

Volume Number: 21 (2005)
Issue Number: 1
Column Tag: Programming

AppleScript Essentials

by Benjamin S. Waldie

Thinking Logically

Last month, we explored adding different types of repeat loops to scripts, which is a very important and useful aspect of AppleScript development. As we discussed, by allowing you to perform a series of repetitive tasks without the need to duplicate code, repeat loops help to make your code less verbose, more efficient, and easier to change in the future. This month, we will focus on adding logic to your scripts, which is another important part of AppleScript development.

In AppleScript, a script can be written to logically determine a specific course of action, based on criteria that you define. For example, a backup script might be written to perform a specific backup process, based on the user that triggers the script, or based on the day of the week. While this is a fairly simple example, the point is, by adding logic to a script, the script can actually make decisions about which tasks should be performed.

If/Then Statements

Adding logic to a script is done with the addition of an if/then statement. If/then statements can range from the simple to the extremely complex.

When you write a script, you write a series of instructions for AppleScript to perform when the script is run. Each of these instructions is considered to be a statement. Simple statements are written as single lines of code. Compound statements are AppleScript statements that are written as more than one line of code. Compound statements contain other AppleScript statements, and always end with an end clause. Tell statements, repeat statements, and if/then statements would be considered compound statements.

Basic If/Then Statements

The most basic form of the if/then statement appears as follows:

if boolean expression then 
 do something 
end if

You can see from the example above, that a boolean expression is used as the basis for the if/then statement. In if/then statements, a boolean expression must evaluate to a value of true in order for the desired code, specified above as do something, to be executed.

In AppleScript, an expression is defined as a series of terms that evaluates to a value. For example, the following code would be considered an expression in AppleScript, and evaluates to a value of 2: 1 + 1 A boolean expression is considered to be any expression that evaluates to a true or false value.

Below is a functional example of a basic if/then statement:

set theOutputFolderPath to path to desktop folder 
set theNewFolderName to "My Folder"

tell application "Finder"

 if (exists folder (theOutputFolderPath & theNewFolderName as string)) = false then 
  make new folder at desktop with properties {name:theNewFolderName} 
 end if 
end tell

In the example above, the first two lines set up variables containing an output folder path and a folder name. Next, the if/then statement determines whether the folder already exists, and it triggers code to create the folder if it does not already exist.

As I said above, a boolean expression in an if/then statement must evaluate to a true value. To fully understand this, let's look at the boolean expression from our example in a little more detail. The complete boolean expression to be evaluated is the following:

(exists folder (theOutputFolderPath & theNewFolderName as string)) = false

We can break down this boolean expression into two separate parts. In the first part, the Finder's exists command is used in order to determine whether the folder already exists, and is represented by the following code:

(exists folder (theOutputFolderPath & theNewFolderName as string))

The second part of the boolean expression determines whether the result of the first part is equal to a value of false, and is represented by the following code:

= false

Looking at both parts of the boolean expression together again as a whole, if the result of the exists command is equal to false, then the second part of the boolean expression confirms that the first part is equal to false. Therefore, the boolean expression as a whole has been determined to be true, and the next part of the code will be executed, thus creating the folder.

Initiating a Second Course of Action

It is also possible to initiate a second course of action, should the boolean expression evaluate to a value of false. This is done through the addition of an else clause to the if/then statement. For example:


if boolean expression then 
 do something 1 
else 
 do something 2 
end if

Let's add an else clause to our example from above that creates a folder. In the following example, if the folder does not already exist, then it will be created. However, if the folder does already exist, then the user will be presented with a dialog indicating that a new folder was not created because one already exists.

set theOutputFolderPath to path to desktop folder 
set theNewFolderName to "My Folder"

tell application "Finder"

 if (exists folder (theOutputFolderPath & theNewFolderName as string)) = false then 
  make new folder at desktop with properties {name:theNewFolderName} 
 else 
  display dialog "Did not create a folder because one already exists."

 end if 
end tell

Even with the use of basic if/then statements, you can already begin to see that if/then statements can provide a lot of flexibility with regard to the behavior of a script.

Combining Boolean Expressions

In certain instances, you may need to combine more than one boolean expression together in order to create a new, more complex boolean expression. This can be done with the use of the and or the or AppleScript operator. For example:

boolean expression and boolean expression

boolean expression or boolean expression

In either of the above cases, the entire expression will evaluate to a true or false value. In the first instance, each boolean expression must evaluate to a value of true in order for the entire expression to evaluate to a value of true. In the second instance, if either of the boolean expressions evaluates to a value of true, then the entire expression will evaluate to a value of true.

The following example uses a combination of two boolean expressions in order to determine whether to create a folder called My Tuesday Folder. One boolean expression determines whether the folder already exists. The other determines if the current date is a Tuesday. In this example, each of these boolean expressions must evaluate to a value of true, making the entire expression evaluate to a value of true, in order for the folder to be created.

set theOutputFolderPath to path to desktop folder 
set theNewFolderName to "My Tuesday Folder"

tell application "Finder"

 if (exists folder (theOutputFolderPath & theNewFolderName as string)) = 
	false and (weekday of (current date)) = Tuesday then 
  make new folder at desktop with properties {name:theNewFolderName} 
 end if 
end tell

Complex If/Then Statements

As we have seen so far, the most basic form of the if/then statement evaluates a boolean expression in order to determine whether a specific course of action should occur. An if/then statement of this nature also allows you to take an alternate course of action, if desired. However, in some cases, you may need to evaluate a boolean expression against multiple criteria, taking multiple courses of action depending on the results. This can be done by extending the else clause in the if/then statement to an else if clause. For example:

if boolean expression then 
 do something 1 
else if boolean expression then 
 do something 2 
end if

In the following example, the user is prompted, with a displayed dialog, to click a button indicating whether a folder should be created. In the dialog, the user is presented with 3 buttons - Yes, No, and Maybe Later. With the use of a more complex if/then statement, the script performs a different action, based on the button clicked by the user. If the user clicks the Yes button, then the folder is created on the desktop. If the user clicks the No button, then the folder is not created. If the user clicks the Maybe Later button, then the user is prompted to trigger the script again when ready to create the folder.

set theButton to button returned of 
(display dialog "Would you like to create a new folder on the desktop?" 
buttons {"Yes", "No", "Maybe Later"}) 
set theOutputFolderPath to path to desktop folder 
set theNewFolderName to "My Folder"

if theButton = "Yes" then 
 tell application "Finder"

  make new folder at desktop with properties {name:theNewFolderName} 
 end tell 
else if theButton = "Maybe Later" then 
 display dialog "Trigger the script again when you are ready to build a folder."

end if

Optionally, you may still choose to include an else clause in this type of if/then statement, if desired. For example, we could add an else clause to our code above in order to display a notice to the user if the No button is clicked.

set theButton to button returned of 
(display dialog "Would you like to create a new folder on the desktop?" buttons 
{"Yes", "No", "Maybe Later"}) 
set theOutputFolderPath to path to desktop folder 
set theNewFolderName to "My Folder"

if theButton = "Yes" then 
 tell application "Finder"

  make new folder at desktop with properties {name:theNewFolderName} 
 end tell 
else if theButton = "Maybe Later" then 
 display dialog "Trigger the script again when you are ready to build a folder."

else 
 display dialog "A folder has not been created."

end if

Nested If/Then Statements

Another effective way to create complex if/then statements is through the nesting of if/then statements.

If you are not new to scripting, then you may be familiar with nesting already. Nesting refers to the placement of one type of AppleScript statement within another statement of the same type.

An example of a nested if/then statement's syntax would be the following:

if boolean expression then 
 if boolean expression then 
  do something 1 
 end if 
else if boolean expression then 
  do something 2 
end if

Looking back again to our folder creation example, the following code has been modified to include a nested if/then statement. Should the user choose to click the Yes button to create a new folder, a second if/then statement will be executed. This will determine whether the folder exists before creating it, taking a different course of action if it does already exist.

set theButton to button returned of (display dialog "Would you like 
to create a new folder on the desktop?" buttons {"Yes", "No", "Maybe Later"}) 
set theOutputFolderPath to path to desktop folder 
set theNewFolderName to "My Folder"

if theButton = "Yes" then 
 tell application "Finder"

  if (exists folder (theOutputFolderPath & theNewFolderName as string)) = false then 
   make new folder at desktop with properties {name:theNewFolderName} 
  else 
   display dialog "Did not create a folder because one already exists."

  end if 
 end tell 
else if theButton = "Maybe Later" then 
 display dialog "Trigger the script again when you are ready to build a folder."

else 
 display dialog "A folder has not been created."

end if

In Closing

As you can see, if/then statements can be tremendously useful when scripting. With the use of simple and complex if/then statements, your scripts can become infinitely flexible, allowing them to take specific action based on virtually any situation that might occur during processing. In fact, without the use of if/then statements and other powerful scripting techniques, such as repeat loops, certain types of workflows could just not be automated. Imagine trying to create a complex asset management system that uses AppleScript to move files around, without the use of if/then statements or repeat loops. It would be extremely difficult, to say the least, if not impossible. So, I encourage you to begin incorporating if/then statements into your scripts in order to automate more complex workflows, and make your scripts more robust.

Until next time, keep scripting!


Benjamin Waldie is president of Automated Workflows, LLC, a firm specializing in AppleScript and workflow automation consulting. In addition to his role as a consultant, Benjamin is an evangelist of AppleScript, and can frequently be seen presenting at Macintosh User Groups, Seybold Seminars, and MacWorld. For additional information about Benjamin, please visit http://www.automatedworkflows.com, or email Benjamin at applescriptguru@mac.com

 

Community Search:
MacTech Search:

Software Updates via MacUpdate

MacFamilyTree 8.2.7 - Create and explore...
MacFamilyTree gives genealogy a facelift: modern, interactive, convenient and fast. Explore your family tree and your family history in a way generations of chroniclers before you would have loved.... Read more
WhatsApp 0.2.8000 - Desktop client for W...
WhatsApp is the desktop client for WhatsApp Messenger, a cross-platform mobile messaging app which allows you to exchange messages without having to pay for SMS. WhatsApp Messenger is available for... Read more
TotalFinder 1.10.7 - Adds tabs, hotkeys,...
TotalFinder is a universally acclaimed navigational companion for your Mac. Enhance your Mac's Finder with features so smart and convenient, you won't believe you ever lived without them. Features... Read more
Box Sync 4.0.7886 - Online synchronizati...
Box Sync gives you a hard-drive in the Cloud for online storage. Note: You must first sign up to use Box. What if the files you need are on your laptop -- but you're on the road with your iPhone? No... Read more
Espresso 5.1 - Powerful HTML, XML, CSS,...
Note from the developer: For the new Espresso, we changed our versioning and licensing approach with more consistent pricing and a simpler development timeline: "X+1". Each new update would increase... Read more
VueScan 9.6.04 - Scanner software with a...
VueScan is a scanning program that works with most high-quality flatbed and film scanners to produce scans that have excellent color fidelity and color balance. VueScan is easy to use, and has... Read more
Slack 3.0.5 - Collaborative communicatio...
Slack is a collaborative communication app that simplifies real-time messaging, archiving, and search for modern working teams. Version 3.0.5: Bug Fixes: An important security update. Security... Read more
VirtualBox 5.2.6 - x86 virtualization so...
VirtualBox is a family of powerful x86 virtualization products for enterprise as well as home use. Not only is VirtualBox an extremely feature rich, high performance product for enterprise customers... Read more
Vivaldi 1.13.1008.40 - An advanced brows...
Vivaldi is a browser for our friends. In 1994, two programmers started working on a web browser. Our idea was to make a really fast browser, capable of running on limited hardware, keeping in mind... Read more
WhatRoute 2.1.1 - Geographically trace o...
WhatRoute is designed to find the names of all the routers an IP packet passes through on its way from your Mac to a destination host. It also measures the round-trip time from your Mac to the router... Read more

Latest Forum Discussions

See All

JYDGE (Games)
JYDGE 1.0.0 Device: iOS Universal Category: Games Price: $4.99, Version: 1.0.0 (iTunes) Description: Build your JYDGE. Enter Edenbyrg. Get out alive. JYDGE is a lawful but awful roguehate top-down shooter where you get to build your... | Read more »
Tako Bubble guide - Tips and Tricks to S...
Tako Bubble is a pretty simple and fun puzzler, but the game can get downright devious with its puzzle design. If you insist on not paying for the game and want to manage your lives appropriately, check out these tips so you can avoid getting... | Read more »
Everything about Hero Academy 2 - The co...
It's fair to say we've spent a good deal of time on Hero Academy 2. So much so, that we think we're probably in a really good place to give you some advice about how to get the most out of the game. And in this guide, that's exactly what you're... | Read more »
Everything about Hero Academy 2: Part 3...
In the third part of our Hero Academy 2 guide we're going to take a look at the different modes you can play in the game. We'll explain what you need to do in each of them, and tell you why it's important that you do. [Read more] | Read more »
Everything about Hero Academy 2: Part 2...
In this second part of our guide to Hero Academy 2, we're going to have a look at the different card types that you're going to be using in the game. We'll split them up into different sections too, to make sure you're getting the most information... | Read more »
Everything about Hero Academy 2: Part 1...
So you've started playing Hero Academy 2, and you're feeling a little bit lost. Don't worry, we've got your back. So we've come up with a series of guides that are going to help you get to grips with everything that's going on in the game. [Read... | Read more »
What mobile gaming can learn from the Ni...
While Nintendo might not have had things all its own way since it began developing for mobile, one thing it has got right is the release of the Switch. After the disappointment of the WiiU, which I still can't really explain, the Switch felt a... | Read more »
Programmer of Sonic The Hedgehog launche...
Japanese programmer Yuji Naka is best known for leading the team that created the original Sonic The Hedgehog. He’s moved on from the speedy blue hero since then, launching his own company based in Tokyo – Prope Games. Legend of Coin is the... | Read more »
Why doesn't mobile gaming have its...
The Overwatch League is a pretty big deal. It's an attempt to really push eSports into the mainstream, by turning them into, well, regular sports. But slightly less sweaty. It's a lavish affair with teams from all around the world, and more... | Read more »
Give Webzen’s new billiard game PoolTime...
Best known for producing hugely popular MMO titles, South Korean publisher Webzen is now taking aim at a different genre altogether. PoolTime is a realistic eight ball pool simulator, allowing you to compete in real-time matches against players... | Read more »

Price Scanner via MacPrices.net

9.7-inch 2017 WiFi iPads on sale starting at...
B&H Photo has 9.7″ 2017 WiFi #Apple #iPads on sale for $30 off MSRP for a limited time. Shipping is free, and pay sales tax in NY & NJ only: – 32GB iPad WiFi: $299, $30 off – 128GB iPad WiFi... Read more
Wednesday deal: 13″ MacBook Pros for $100-$15...
B&H Photo has 13″ #Apple #MacBook Pros on sale for up to $100-$150 off MSRP. Shipping is free, and B&H charges sales tax for NY & NJ residents only: – 13-inch 2.3GHz/128GB Space Gray... Read more
Apple now offering Certified Refurbished 2017...
Apple has Certified Refurbished 9.7″ WiFi iPads available for $50-$80 off the cost of new models. An Apple one-year warranty is included with each iPad, and shipping is free: – 9″ 32GB WiFi iPad: $... Read more
10″ iPad Pros on sale for $50-$75 off MSRP, n...
B&H Photo has 10″ and #Apple #iPad Pros on sale for up to $75 off MSRP. Shipping is free, and B&H charges sales tax in NY & NJ only. Note that some sale prices are restricted to certain... Read more
Apple refurbished Mac minis available startin...
Apple has restocked Certified Refurbished Mac minis starting at $419. Apple’s one-year warranty is included with each mini, and shipping is free: – 1.4GHz Mac mini: $419 $80 off MSRP – 2.6GHz Mac... Read more
Amazon offers Silver 13″ Apple MacBook Pros f...
Amazon has new Silver 2017 13″ #Apple #MacBook Pros on sale today for up to $150 off MSRP, each including free shipping: – 13″ 2.3GHz/128GB Silver MacBook Pro (MPXR2LL/A): $1199.99 $100 off MSRP – 13... Read more
Sale: 12″ 1.3GHz MacBooks on sale for $1499,...
B&H Photo has Space Gray and Rose Gold 12″ 1.3GHz #Apple MacBooks on sale for $100 off MSRP. Shipping is free, and B&H charges sales tax for NY & NJ residents only: – 12″ 1.3GHz Space... Read more
Apple offers Certified Refurbished 2017 iMacs...
Apple has a full line of Certified Refurbished iMacs available for up to $350 off original MSRP. Apple’s one-year warranty is standard, and shipping is free. The following models are available: – 27... Read more
13″ MacBook Airs on sale for $120-$100 off MS...
B&H Photo has 2017 13″ 128GB MacBook Airs on sale for $120 off MSRP. Shipping is free, and B&H charges sales tax for NY & NJ residents only: – 13″ 1.8GHz/128GB MacBook Air (MQD32LL/A): $... Read more
15″ Touch Bar MacBook Pros on sale for up to...
Adorama has Space Gray 15″ MacBook Pros on sale for $200 off MSRP. Shipping is free, and Adorama charges sales tax in NJ and NY only: – 15″ 2.8GHz MacBook Pro Space Gray (MPTR2LL/A): $2199, $200 off... Read more

Jobs Board

*Apple* Solutions Consultant - Apple (United...
# Apple Solutions Consultant Job Number: 113384559 Brandon, Florida, United States Posted: 10-Jan-2018 Weekly Hours: 40.00 **Job Summary** Are you passionate about Read more
Art Director, *Apple* Music + Beats1 Market...
# Art Director, Apple Music + Beats1 Marketing Design Job Number: 113258081 Santa Clara Valley, California, United States Posted: 05-Jan-2018 Weekly Hours: 40.00 Read more
*Apple* Pay & Wallet Engineering Manager...
# Apple Pay & Wallet Engineering Manager, Apple Watch Job Number: 83769531 Santa Clara Valley, California, United States Posted: 06-Nov-2017 Weekly Hours: 40.00 Read more
UI Tools and Automation Engineer, *Apple* M...
# UI Tools and Automation Engineer, Apple Media Products Job Number: 113136387 Santa Clara Valley, California, United States Posted: 11-Jan-2018 Weekly Hours: 40.00 Read more
Senior Product Architect, *Apple* Pay - App...
# Senior Product Architect, Apple Pay Job Number: 58046427 Santa Clara Valley, California, United States Posted: 04-Jan-2018 Weekly Hours: **Job Summary** Apple , Read more
All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.