TweetFollow Us on Twitter

Color Mixer
Volume Number:4
Issue Number:4
Column Tag:Basic School

Color Mixer Creates Custom Colors

By Dave Kelly, MadTutor Editorial Board, Ontario, California

ZBasic Does Mac II Color!

Yes, that’s right! The new ZBasic version 4.01 now supports the Mac II’s full 256 colors. There is no need to restrict yourself to the 8 colors of the old Quickdraw.

To use the 256 color mode, ZBasic now provides a LONG COLOR statement. The syntax is: LONG COLOR blue%, green%, red%, [ background]. LONG COLOR is used to set the colors and grey levels for subsequent graphic commands used on the Macintosh II. The command is ignored by other Macs.

The values of blue%, green% and red% may range from 0 to 65535. They may also be represented as long integers (65535 as a long integer is -32767 as a regular integer). The colors are used in RGBColor calls to the Mac II ROM where 0 is the darkest and 65535 is the lightest.

The background variable is used as a flag to indicate if the color should be set in the foreground or in the background. A background value of 0 causes the background color to be set to the blue%, green%, red% color indicated. Subsequent LONG COLOR statements that have no background variable or background is set to other than 0 will set the foreground color. The background color will be used the next time it is needed, when the screen gets updated or is cleared with CLS.

Inside Macintosh Volume V has the new color information we need to understand how the Mac II gets its color and how to use color in your applications. Before using color you should read the User Interface chapter of Inside Macintosh Vol. V. One of the most important thing you should try do is leave the selection and choices of color in the hands of the user. The study of color and how it affects people is not well defined. One of my co-workers is color-blind and has a totally different way of looking at color than I do. If color is not used carefully it could hinder instead of help to enhance your software.

Traditionally (and on that other computer) color has been used to help distinguish different things on the screen and show relationships between items on the screen. Some colors have special significance. For example: red means stop, green means go, yellow means caution. Colors can enhance in this way, however, remember that after the user has seen the same color combinations several dozen times, the color becomes commonplace and he might still make mistakes that the color was supposed to help him avoid. In fact, the bright colors used to warn a user may actually attract him to select that color.

Inside Mac encourages you to start out the design of your program in black and white and add color as a supplement to provide extra for people who have color capability. Color use should be limited to the content area of your windows. Let the user decide what color his menus, borders, controls etc. should be. The Colorizer application and CDEV let the user select his own colors for these items. If the user selects colors for somethings then your application comes along and changes part of these colors, there might be some pretty strange color combinations left over. Many suggestions are available in Inside Mac which you should know so that your applications will be consistent and won’t conflict with the user interface.

Fig. 1 Mixing colors, in this case white!

The blue%, green%, and red% that you specify in the LONG COLOR is used by the Color Manager to return the pixel value that best represents that color. The Color Manager searches through the color table for the RGB color that most closely matched the desired color. Color Quickdraw then places that color on the screen. The way that each pixel is assigned a color to display is by way of the Color Look-Up Table (CLUT). The video card takes each pixel and compares it to the CLUT to determine which RGB value that pixel represents. The RGB value is split off into three separate electrical signals (red, green, and blue) to the video monitor. By the way, when red=green=blue you get shades of gray. By using the Palette Manager (if you could from Basic) you could change the drawing environment to use a different palette.

Color Selection

Color Selection routines have been provided to the Macintosh II by Apple via the Color Picker routines. Here is the problem: ZBasic doesn’t support all the new calls for the Mac II yet. Zedcor has promised to send me format and structure information to add more calls to ZBasic as required, but Andy Gariepy has been to busy to send it to me. So that being the case I have no choice but to write my own color selection routines. Also the Color Picker is PACK_12 in system 4.2. I’m not sure it would be that easy to call a PACKage from ZBasic without it being defined by the language itself. Maybe we will have to wait for Zedcor to implement it. In the mean time I have made my own “quick and dirty” version of a “Color Picker”.

If you think about it, the Apple Color Picker routine really does do a lot! It allows you to type in the red, green, blue colors, but also will adjust these colors when you set the hue, saturation, and brightness. Proper adjustment of the red, green, and blue will result in the same hues, saturation, and brightness, but it just isn’t as convenient to setup.

The color wheel concept is interesting too. You can learn a lot about how colors can be mixed by watching the values of red, green, and blue while moving the mouse around the color wheel. Move more towards blue and watch how the numbers change! Amazing! The color wheel really is a good way to allow you to select colors. The only other good approach is to allow the user to pick from a color palette. The problem is how to decide which colors are defined in the palette.

My example suggests a simple way that colors could be selected by the user. By choosing the Pick Colors menu or button you are given a set of 3 scroll bars to adjust the amount of blue, green, and red. You can mix the amount of each color and see the effect of mixing each. This might even be useful for showing young children the effects of mixing colors. If you like the color then click on OK or else cancel to return to the original color setting.

The problem with my Color Selection demo is that because of the way ZBasic does event trapping it is difficult to make the routines be stand alone. My color mixer program provided here must become an integral part of the application because of the way that ZBasic “automatically” generates the event loop. I tried using separate ON DIALOG GOSUB traps, but it somehow didn’t work. I could only get one of the ON DIALOG statements to take effect.

There are a few problems that have shown up with my early version of ZBasic 4.01. First, the scroll bars don’t scroll properly when using the max and min values that are given in the ZBasic manual. If +32767 is used and you scroll to the right (or down) by clicking on the right (or down) arrow, when the bar reaches the max it will jump to the minimum! Also if you change the max value to between 32100 and 32766 and click in the scroll bar between the arrow and box, when the max is reached it also jumps down to the minimum. UGH! And if -32768 is used for the minimum the scroll bar returns a 0 when the box is set at the minimum. -32767 works fine. I am forced to adjust these values in the program, but it won’t matter much because the selected color will likely be the same anyway because we only have 256 possible.

Hierarchical Menu Notes

Using Hierarchical menus isn’t so simple with ZBasic. Hierarchical menus are stored as resources of the type MENU just as other menus may be stored. However, to use MENU resources with ZBasic AND have ZBasic be able to use them, you have to set up your own event loop using GETNEXTEVENT. Then you have to handle each event with the standard Macintosh way of programming and can’t use ZBasic’s event trapping routines (they get in the way). What we need is a way to use MENU, WINDOW, CONTROLs and other resources from ZBasic which can be invoked with ZBasic statements (which are integrated in with the ZBasic “automatic” event loop. It would also be useful to be able to automatically install a resource into an application when ZBasic compiles as an application. Maybe Zedcor can put these things on their “THINGS TO DO” list for version 4.02?

A submenu is associated with a menu item by using 2 fields of the MenuInfo data structure. When the itemCmd field is set to hex $1B, the itemMark field should contain the menuID (in hex) of the associated hierarchical menu. These values can be created/modified with ResEdit 1.1B3.

By using Menu Manager calls (pg. E-181 in ZBasic manual) you can find out which menu is selected in the GETNEXTEVENT loop as you would with regular type menus. More on this in a future column.

{1}
‘Professor Mac’s ZBasic Color Mixer
‘©MacTutor 1988
‘By Dave Kelly

WINDOW OFF
COORDINATE WINDOW
DIM Colorbox%(3)
red&=0
blue&=0
green&=0

DEF MOUSE=-1
false=0:true=NOT(false)
MENU 1,0,1,”File”
MENU 1,1,1,”Select Color”
MENU 1,2,1,”Quit”
EDIT MENU 2

‘Find out screen size.
CALL GETWMGRPORT(WMgrPort&)
PortTop=PEEK WORD(WMgrPort&+8)
PortLeft=PEEK WORD(WMgrPort&+10)
PortBottom=PEEK WORD(WMgrPort&+12)
PortRight=PEEK WORD(WMgrPort&+14)

WINDOW 1,”Main Window”,(10,44)-(PortRight-4,PortBottom-4)
TEXT ,,,0
BUTTON #6,1,”Quit”,(20,WINDOW(3)-50)-(85,                      
 WINDOW(3)-30),1
BUTTON #7,1,”Pick Color”,(120,WINDOW(3)-50)-(195,              
 WINDOW(3)-30),1
CALL SETRECT(Colorbox%(0),10,10,WINDOW(2)-10,                  
 WINDOW(3)-215)
PICTURE ON
LONG COLOR blue&,green&,red&
CALL PAINTRECT(Colorbox%(0))
CALL MOVETO(20,WINDOW(3)-100)
COLOR=7
PRINT “Blue:”;blue&;” Red:”;red&;” Green:”;green&;SPACE$(10)
PICTURE OFF,Pic1&
PICTURE, Pic1&
WINDOW PICTURE #1,Pic1&

ON DIALOG GOSUB “Event”
ON MENU GOSUB “MenuEvent”
DIALOG ON:MENU ON
“Loop”
GOTO “Loop”
DIALOG STOP:MENU STOP

“MenuEvent”
Menunumber=MENU(0)
Menuitem=MENU(1)
MENU
IF Menunumber<>1 THEN RETURN
SELECT Menuitem
 CASE 1
 GOSUB “ColorPick”
 CASE 2
 GOSUB “Quit”
END SELECT
RETURN

“Quit”
WINDOW PICTURE #1,0
KILL PICTURE Pic1&
END

“ColorPick”:’A Color Selection routine
done=false
min%=-32767:’Manual says that -32768 is Min. max%=32766:’Manual says 
that 32767 is Max. 
currentred&=red&
currentblue&=blue&
currentgreen&=green&
WINDOW 5,”Color Chooser”,(PortLeft+10,PortTop+30)-             (PortRight-10, 
PortBottom-10),-2
SCROLL BUTTON #1,currentblue&-32767,min%,max%,100,(20,
 WINDOW(3)-200)-(WINDOW(2)-20,WINDOW(3)-200+16),0
SCROLL BUTTON #2,currentgreen&-32767, min%, max%, 100,         (20, WINDOW(3)-150)-(WINDOW(2)-20, 
WINDOW(3)-150+16),0
SCROLL BUTTON #3,currentred&-32767, min%, max%, 100, (20,      
 WINDOW(3)-100)-(WINDOW(2)-20,WINDOW(3)-100+16),0
BUTTON #4,1,”OK”,(20,WINDOW(3)-50)-(85,WINDOW(3)-30),1
BUTTON #5,1,”Cancel”,(120,WINDOW(3)-50)-(185,                  
 WINDOW(3)-30),1
TEXT 0,12,0,0
CALL MOVETO(WINDOW(2)/2,WINDOW(3)-200+30)
String$=”Blue: “+STR$(currentblue&)
COLOR=4
CALL DRAWSTRING(String$)
CALL MOVETO(WINDOW(2)/2,WINDOW(3)-150+30)
String$=”Green: “+STR$(currentgreen&)
COLOR=2
CALL DRAWSTRING(String$)
CALL MOVETO(WINDOW(2)/2,WINDOW(3)-100+30)
String$=”Red: “+STR$(currentred&)
COLOR=6
CALL DRAWSTRING(String$)
GOSUB “UpdateColorBox”
FLUSHEVENTS
RETURN

“ButtonEvent”
Buttonnumber=DIALOG(1)
Buttonvalue&=BUTTON(Buttonnumber)+32767
SELECT Buttonnumber
 CASE 1
 GOSUB “Button1”:’set blue
 CASE 2
 GOSUB “Button2”:’set green
 CASE 3
 GOSUB “Button3”:’set red
 CASE 4
 GOSUB “Button4”:’ OK button was pressed
 CASE 5
 GOSUB “Button5”:’ Cancel button was pressed
 CASE 6
 GOSUB “Quit”
 CASE 7
 GOSUB “ColorPick”
END SELECT
RETURN

“UpdateColorBox”
LONG COLOR currentblue&,currentgreen&,currentred&
CALL SETRECT(Colorbox%(0),10,10,WINDOW(2)-10,                  
 WINDOW(3)-215)
CALL PAINTRECT(Colorbox%(0))
RETURN

“Button1”:’blue scroll bar
currentblue&=Buttonvalue&
CALL MOVETO(WINDOW(2)/2,WINDOW(3)-200+30)
String$=”Blue: “+STR$(currentblue&)+SPACE$(10)
COLOR=4:’set text color to blue
CALL DRAWSTRING(String$)
GOSUB “UpdateColorBox”
RETURN

“Button2”:’green scroll bar
currentgreen&=Buttonvalue&
CALL MOVETO(WINDOW(2)/2,WINDOW(3)-150+30)
String$=”Green: “+STR$(currentgreen&)+SPACE$(10)
COLOR=2:’set text color to green
CALL DRAWSTRING(String$)
GOSUB “UpdateColorBox”
RETURN

“Button3”:’red scroll bar
currentred&=Buttonvalue&
CALL MOVETO(WINDOW(2)/2,WINDOW(3)-100+30)
String$=”Red: “+STR$(currentred&)+SPACE$(10)
COLOR=6:’set text color to red
CALL DRAWSTRING(String$)
GOSUB “UpdateColorBox”
RETURN

“Button4”:’OK button
red&=currentred&
blue&=currentblue&
green&=currentgreen&
GOSUB “Closestuff”
RETURN

“Button5”:’Cancel button
GOSUB “Closestuff”
RETURN

“Closestuff”
FOR J=1 TO 5
 BUTTON CLOSE J
NEXT J
WINDOW CLOSE 5
PICTURE ON
LONG COLOR blue&,green&,red&
CALL PAINTRECT(Colorbox%(0))
CALL MOVETO(20,WINDOW(3)-100)
COLOR=7
PRINT “Blue:”;blue&;” Red:”;red&;” Green:”;green&;SPACE$(10)
PICTURE OFF,Pic1&
PICTURE, Pic1&
WINDOW PICTURE #1,Pic1&
RETURN

“Event”
D=DIALOG(0)
SELECT D
 CASE 1
 GOSUB “ButtonEvent”
 CASE 4
 GOSUB “Quit”:’if close box selected
END SELECT
RETURN

Hypercard Tidbits

At MacWorld Expo in San Francisco someone asked if we knew a way to effectively mask out the command-option keys in HyperCard. The following information was given in WINOID issue #1, a newsletter for the Apple HyperCard Users Group. I hope that this will answer your question.

How can I hide buttons from command-option key peek?

When you don’t want people peeking at your buttons, it is necessary to trap the command and option keys. While there are several ways of doing this, here is one that is simple and works about 99% of the time.

The basic idea is to take the user to another card when the command and option keys are both pressed. This can be a “no peeking” card or a rules card or some other kind of card. When the user releases both keys, you then return to the card the user was viewing before trying to peek. Following are the two scripts that accomplish this. Put the top one in your stack script and the other in the “no peeking” card script.

For the stack script:

{2}
On Idle
  if the commandkey is down and the optionkey is down then
      push this card
      go card “no peeking”
  end if
end Idle

For the “no peeking” card script:

On Idle
  if the commandkey is up and the optionkey is up then
      pop card
  end if
End Idle
 

Community Search:
MacTech Search:

Software Updates via MacUpdate

Latest Forum Discussions

See All

The Legend of Heroes: Trails of Cold Ste...
I adore game series that have connecting lore and stories, which of course means the Legend of Heroes is very dear to me, Trails lore has been building for two decades. Excitedly, the next stage is upon us as Userjoy has announced the upcoming... | Read more »
Go from lowly lizard to wicked Wyvern in...
Do you like questing, and do you like dragons? If not then boy is this not the announcement for you, as Loongcheer Game has unveiled Quest Dragon: Idle Mobile Game. Yes, it is amazing Square Enix hasn’t sued them for copyright infringement, but... | Read more »
Aether Gazer unveils Chapter 16 of its m...
After a bit of maintenance, Aether Gazer has released Chapter 16 of its main storyline, titled Night Parade of the Beasts. This big update brings a new character, a special outfit, some special limited-time events, and, of course, an engaging... | Read more »
Challenge those pesky wyverns to a dance...
After recently having you do battle against your foes by wildly flailing Hello Kitty and friends at them, GungHo Online has whipped out another surprising collaboration for Puzzle & Dragons. It is now time to beat your opponents by cha-cha... | Read more »
Pack a magnifying glass and practice you...
Somehow it has already been a year since Torchlight: Infinite launched, and XD Games is celebrating by blending in what sounds like a truly fantastic new update. Fans of Cthulhu rejoice, as Whispering Mist brings some horror elements, and tests... | Read more »
Summon your guild and prepare for war in...
Netmarble is making some pretty big moves with their latest update for Seven Knights Idle Adventure, with a bunch of interesting additions. Two new heroes enter the battle, there are events and bosses abound, and perhaps most interesting, a huge... | Read more »
Make the passage of time your plaything...
While some of us are still waiting for a chance to get our hands on Ash Prime - yes, don’t remind me I could currently buy him this month I’m barely hanging on - Digital Extremes has announced its next anticipated Prime Form for Warframe. Starting... | Read more »
If you can find it and fit through the d...
The holy trinity of amazing company names have come together, to release their equally amazing and adorable mobile game, Hamster Inn. Published by HyperBeard Games, and co-developed by Mum Not Proud and Little Sasquatch Studios, it's time to... | Read more »
Amikin Survival opens for pre-orders on...
Join me on the wonderful trip down the inspiration rabbit hole; much as Palworld seemingly “borrowed” many aspects from the hit Pokemon franchise, it is time for the heavily armed animal survival to also spawn some illegitimate children as Helio... | Read more »
PUBG Mobile teams up with global phenome...
Since launching in 2019, SpyxFamily has exploded to damn near catastrophic popularity, so it was only a matter of time before a mobile game snapped up a collaboration. Enter PUBG Mobile. Until May 12th, players will be able to collect a host of... | Read more »

Price Scanner via MacPrices.net

Apple is offering significant discounts on 16...
Apple has a full line of 16″ M3 Pro and M3 Max MacBook Pros available, Certified Refurbished, starting at $2119 and ranging up to $600 off MSRP. Each model features a new outer case, shipping is free... Read more
Apple HomePods on sale for $30-$50 off MSRP t...
Best Buy is offering a $30-$50 discount on Apple HomePods this weekend on their online store. The HomePod mini is on sale for $69.99, $30 off MSRP, while Best Buy has the full-size HomePod on sale... Read more
Limited-time sale: 13-inch M3 MacBook Airs fo...
Amazon has the base 13″ M3 MacBook Air (8GB/256GB) in stock and on sale for a limited time for $989 shipped. That’s $110 off MSRP, and it’s the lowest price we’ve seen so far for an M3-powered... Read more
13-inch M2 MacBook Airs in stock today at App...
Apple has 13″ M2 MacBook Airs available for only $849 today in their Certified Refurbished store. These are the cheapest M2-powered MacBooks for sale at Apple. Apple’s one-year warranty is included,... Read more
New today at Apple: Series 9 Watches availabl...
Apple is now offering Certified Refurbished Apple Watch Series 9 models on their online store for up to $80 off MSRP, starting at $339. Each Watch includes Apple’s standard one-year warranty, a new... Read more
The latest Apple iPhone deals from wireless c...
We’ve updated our iPhone Price Tracker with the latest carrier deals on Apple’s iPhone 15 family of smartphones as well as previous models including the iPhone 14, 13, 12, 11, and SE. Use our price... Read more
Boost Mobile will sell you an iPhone 11 for $...
Boost Mobile, an MVNO using AT&T and T-Mobile’s networks, is offering an iPhone 11 for $149.99 when purchased with their $40 Unlimited service plan (12GB of premium data). No trade-in is required... Read more
Free iPhone 15 plus Unlimited service for $60...
Boost Infinite, part of MVNO Boost Mobile using AT&T and T-Mobile’s networks, is offering a free 128GB iPhone 15 for $60 per month including their Unlimited service plan (30GB of premium data).... Read more
$300 off any new iPhone with service at Red P...
Red Pocket Mobile has new Apple iPhones on sale for $300 off MSRP when you switch and open up a new line of service. Red Pocket Mobile is a nationwide MVNO using all the major wireless carrier... Read more
Clearance 13-inch M1 MacBook Airs available a...
Apple has clearance 13″ M1 MacBook Airs, Certified Refurbished, available for $759 for 8-Core CPU/7-Core GPU/256GB models and $929 for 8-Core CPU/8-Core GPU/512GB models. Apple’s one-year warranty is... Read more

Jobs Board

Operating Room Assistant - *Apple* Hill Sur...
Operating Room Assistant - Apple Hill Surgical Center - Day Location: WellSpan Health, York, PA Schedule: Full Time Sign-On Bonus Eligible Remote/Hybrid Regular Read more
Solutions Engineer - *Apple* - SHI (United...
**Job Summary** An Apple Solution Engineer's primary role is tosupport SHI customers in their efforts to select, deploy, and manage Apple operating systems and Read more
DMR Technician - *Apple* /iOS Systems - Haml...
…relevant point-of-need technology self-help aids are available as appropriate. ** Apple Systems Administration** **:** Develops solutions for supporting, deploying, Read more
Omnichannel Associate - *Apple* Blossom Mal...
Omnichannel Associate - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Read more
Operations Associate - *Apple* Blossom Mall...
Operations Associate - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Read more
All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.