TweetFollow Us on Twitter

Curve Fitting 2
Volume Number:1
Issue Number:12
Column Tag:Forth Forum

Curve Fitting, Part II

By Jörg Langowski, Chemical Engineer, Grenoble, France, MacTutor Editorial Board

After last month's refresher on accessing floating point routines from Forth, this column is now going to show you the main part of the curve fitter program.

Let's state our objective again: We have a series of data points (measurements) yi at certain time points ti. The measured data is supposed to follow some quantitative law, so that we can state a theoretical relationship between time t and data y:

The ai are parameters that determine the exact form of the function f.

Lets assume we have estimated initial values for the parameters ai° somehow so that they are not too far away from the true values. Then we need a method that creates some correction terms ai, which when added to the initial values give new, better estimates of the parameters ai':

As you could read in last month's column, the ai are eventually obtained from the solution of a system of linear equations, and we had defined the word gauss to implement the Gauss algorithm that solves such a system.

This month I am going to show you how one sets up the equations (example given for three parameters),

starting from the data and the initial estimate of the function that one wants to fit to it. The full details of the method are given in an appendix to this column.

At this point it is only important to know that the coefficients cij, as defined in last month's column, look like the following:

where N is the total number of data points and fk/ai is the first derivative of the theoretical function at the time tk with respect to the parameter ai.

The terms on the right hand side of the equations, bi, are:

Ri are the residuals (as defined last month),

the differences between the theoretical and measured values at the time points ti.

Therefore, the curve fitting algorithm will consist of the following major parts:

- one routine that calculates the theoretical function value f(ti), given a set of parameters (this will be the 'model' that you use to fit your data),

- one routine that calculates the derivative of this function with respect to one of the parameters ai,

- calculation of all the derivatives fk/ai with k ranging from 0 to (# of data points - 1) and i from 0 to (# of parameters - 1) and saving those derivatives in a matrix,

- computation of the coefficients cij and bi (and setting them up in a matrix),

- solution of the linear equation system thus obtained, giving correction values for the parameters ai,

- changing the parameters by the correction terms and repetition of the whole algorithm if the change is still larger than some predefined (small) number.

The algorithm is implemented in this month's program example (listing 1). The first part contains some additions to the floating point and Gauss algorithm routines that you've already seen last month. One bug had to be corrected in gauss, which left a number on the stack that was supposed to be dropped (added drop in italics in the listing). The floating point output routine has been slightly modified so that real numbers are always printed with one digit in front of the decimal.

In order to be able to check whether the iteration has been completed or not, we will have to compare real numbers, so first we define the

Floating point comparison operator

The SANE package provides a routine for the comparison of two floating point numbers. Four cases are distinguished and the processor status register flags set accordingly:

X N Z V C

x < y 1 1 0 0 1

x = y 0 0 1 0 0

x > y 0 0 0 0 0

unordered0 0 0 1 0

where the address of x is on top of the address of y on the stack.

The operation code for floating point comparison in SANE is 8, so we define

hex : f> 8 fp68k @sr 10 and ;

for comparing two real numbers on the stack. Bit 5 of the result (the X flag) is and-ed out, the reason being that this is the only one that is left unchanged after the SANE trap has been called and the Forth interpreter has taken over again. All the other flags cannot be used, so we won't be able to compare two real numbers for being equal. With 80-bit precision, however, such a test does not make much sense, you will almost never check for equality but rather if a number is less than one other or whether their difference is smaller than some predefined value.

The comparison for 'unorderedness', which sets the V flag, is also trashed by the Forth interpreter. This would only be important if we wanted to test for a NaN (Not a Number), which for instance results from a 0/0 division.

This leaves us with the X flag as the only one usable after the fp68k call. It is set when the real number whose address is on top of the stack is less than the number whose address is below it.

Random number generator - floating point version

For initializing the 'data points' as an input to the curve fitting program, we are going to use simulated data from the same function that we are fitting. We add some 'random noise' to it and need a random number generator for that. SANE contains a floating point random number generator, which computes from an 80-bit floating point input a new random 80-bit floating point number in the range 0 < x < 231-1. We want a number between 0 and 1 (for convenience) so the word ranf scales this number after calling the random number routine. ranf leaves the address of the result on the stack. For initializing the random number generator with an arbitrary seed, ranset is defined.

You will notice one important concept in the definition of ranf and ranset: both words operate on variables (rr, rs and sf) that are axed after the definition is completed. The variables are erased from the vocabulary that way and stay local to the random number routines. This is the way the 'nameless' tokens are created that you read about some issues ago.

The function to be fitted is defined as the word func. 50 bytes are reserved for the array par, so that at maximum 5 parameters (extended precision) can be used in the function. The data points are stored in the single precision arrays xdat and ydat. init_pars initializes the parameters to some arbitrary values, in this case par[1] = 1.0, par[2] = 2.0, and par[3] = -0.1. Calling func with these values, init then creates a set of simulated data (including random noise).

deriv calculates the first derivatives of the function with respect to the parameters from differences,

This definition, too, uses the local variables da1, da2, da3 and da4, which are axed afterwards.

make_derivmat computes all necessary derivative values and sets them up in a single precision matrix. This matrix is then used by the word make_resmat to compute the sums that make up the coefficient matrix. For the right-hand-side coefficients one also needs the residuals, which are calculated and stored into a matrix by residuals.

One iteration of the curve fitting process is done by the word one_iter, which sets up the derivative matrix and computes the residuals by calling the appropriate words, prints the sum of error squares (so you can check the quality of the fit) then sets up the coefficient matrix and calls gauss to solve the linear equation system. The solution is stored in the array delta; these are the correction terms that have to be added to the parameters to get improved estimates. new_pars does this correction and prints out the values of the new parameters, leaving false (zero) on the stack if any parameter has changed by more than one part in 10-5.

The actual curve fitter, nlsqfit, then loops through the iteration until the best fit is obtained.

You can check the fitting process by calling init first and then, for instance, setting par[1] = 2.0, par[2] = 1.0, par[3] = -0.05:

two par x2x  one par 10+ x2x
two par 20 + f/

and start nlsqfit. This will bring you back close to the simulated values, par[1] = 1.0, par[2] = 2.0, and par[3] = -0.1 in about 4 to 5 iterations. The fitted values will not be exactly equal to the simulated ones because of the random noise added to the data.

So far, this is only a skeleton of a curve fitting program because we cannot input floating point numbers manually or from the clipboard (e.g. it would be nice to transfer data from a spreadsheet); also a graphical output will be needed to display the data points and the fitted curve. Next column will deal with those problems.

Listing 1: Non-linear least squares curve fitting routine
( © 1985 J.Langowski by MacTutor )
( Note that this is not stand-alone but needs some definitions from last 
month's example. Only the changed parts are printed here )

hex
: f> 8 fp68k @sr 10 and ;  : fabs f fp68k ;
: lnx 0 elems68k ; : log2x 2 elems68k ;
: ln1x 4 elems68k ; : log21x 6 elems68k ;
: expx 8 elems68k ; : exp2x a elems68k ;
: exp1x c elems68k ; : exp21x e elems68k ;
: x^i 8010 elems68k ; : x^y 8012 elems68k ;
: compoundx c014 elems68k ; 
: annuityx c016 elems68k ;
: sinx 18 elems68k ; : cosx 1a elems68k ;
: tanx 1c elems68k ; : atanx 1e elems68k ;
: randomx 20 elems68k ;   decimal

: dec. ( float\format# -- )
       zzformat ! zzformat swap zzs1 b2d
       zzs1 dup w@ 255 > if ." -" else ."  " then
       dup 4+ count over 1 type ." ."
       swap 1+ swap 1- type ( mantissa )
       2+ w@ ( get exponent )
            1 w* zzformat @ + 1- 
            ." E" . ;

( define constants )
float one  float -one  float zero  float two  float four
1 sp@ one in2x drop  -1 sp@ -one in2x drop 
0 sp@ zero in2x drop
2 sp@ two in2x drop  4 sp@ four in2x drop
( define some floating accumulators)
float fa1   float fa2   float fa3   float fa4

( Gauss algorithm for linear equations)          
float dg    float fk    float ee
variable nv   variable coeff variable solution
( addresses for storing actual parameters)
: gauss ( z\x\n | --)  nv !  8- coeff !  solution !
  nv @ 1- 0 do  ( i-loop)
     i dup coeff @ calc.offset dg s2x ( diag elem)
     nv @ i 1+ do  ( j-loop)
        i j coeff @ calc.offset fk s2x   dg fk f/
        nv @ 1+ j do  ( k-loop)
            k i coeff @ calc.offset fa1 s2x
                      fk fa1 f*  fa1 fneg  ( -fk*x[i,k])
            j i coeff @ calc.offset dup fa1 s+
                      fa1 swap x2s
                  loop
              loop
           loop
nv @ dup 0 do i over coeff @ calc.offset  fa1 s2x
                       fa1 solution @ i 4* + x2s loop drop
1 nv @ 1- do
     i dup coeff @ calc.offset dg s2x
     solution @ i 4* + ee s2x  dg ee f/
     0 i 1- do i j coeff @ calc.offset fa1 s2x
                         ee fa1 f* fa1 fneg
               solution @ i 4* + dup fa1 s+ fa1 swap x2s
            -1 +loop
       -1 +loop
nv @ 0 do  solution @ i 4* +  fa1 s2x
           i dup coeff @ calc.offset  fa1 s/
           fa1 solution @ i 4* + x2s
       loop ;

( declarations for curve fitter )
create ydat 400 allot   create xdat 400 allot
create residues 400 allot
100 10 matrix derivmat    10 11 matrix resmat
     3 constant npars        10 constant npts
create par 50 allot   create delta 20 allot
float eps  float errsum
1 sp@ eps in2x drop  10000 sp@ eps in/ drop
float onehundred  100 sp@ onehundred in2x drop
float ten  10 sp@ ten in2x drop
( define function )                              
: func ( x -- f[x] = par[1] + par[2] * exp[par[3]*x] )
  par 20 + over f* dup expx  
  par 10 + over f*  par over f+ ;
: test 10 0 do i sp@ fa1 in2x . 2 spaces
                          fa1 func 10 dec. cr loop ;
: >fa1  fa1 s2x ;
: init_pars
  one par x2x  two par 10+ x2x
 -one par 20 + x2x  ten par 20 + f/ ;
init_pars

( derivative, matrix of derivs )                 
float da1 float da2 float da3 float da4  ( local vars )
: deriv ( par \ x -- d-func/d-par at x )
  dup da1 x2x da2 x2x  dup da4 x2x  eps da4 f*
  da4 over f+          da2 func  da3 x2x
  da4 over 2dup f- f-  da1 func  da3 f-
  da4 da3 f/   two da3 f/  da4 swap f+  da3  ;
axe da1 axe da2 axe da3 axe da4

: make_derivmat
  npts 0 do  npars 0 do
       xdat j 4* +  >fa1
       par i 10 * +   fa1 deriv  j i derivmat x2s
     loop  loop ;

( calculate residuals )
: residuals
  zero errsum x2x
  npts 0 do
     xdat i 4* + >fa1   fa1 func   ydat i 4* +  swap  s-
     fa1 residues i 4* + x2s  fa1 dup f*  fa1 errsum f+
     loop  ;
: .resid 
   npts 0 do  residues i 4* + >fa1  fa1 7 dec. cr loop ;

( make matrix of residuals )
 make_resmat
  npars 0 do   npars 0 do    zero fa1 x2x
    npts 0 do
      i k derivmat fa2 s2x    i j derivmat fa2 s*
      fa2 fa1 f+  loop
    fa1  i j resmat x2s    fa1  j i resmat x2s
  loop  loop
  npars 0 do  zero fa1 x2x
     npts 0 do
            i j derivmat fa2 s2x  residues i 4* + fa2 s*
            fa2 fa1 f-  loop
          fa1  i npars  resmat x2s loop ;

( calculate correction terms)
: one_iter
  make_derivmat    residuals  
  ." sum of error squares: " errsum 7 dec. cr
  make_resmat      delta 0 0 resmat npars gauss ;

: new_pars 16 ( true if no significant changes )
  npars 0 do par i 10 * +
    delta i 4* +  over  s+
    ." par[" i . ." ] = " dup  7 dec. cr
    delta i 4* + fa1 s2x  fa1 f/
    fa1 fabs  eps fa1 f> and loop ;

( ranf, initialize data matrices ) 
float rr float rs float sf ( local to ranf )
1 31 scale 1 - sp@ sf in2x drop
: ranset rr x2x ;
: ranf rr randomx  rr rs x2x  sf rs f/  rs ;
axe rr axe rs axe sf
12345678 sp@ fa1 in2x drop fa1 ranset
80 ' npts !    
: init npts 0 do i sp@ fa1 in2x 4*
          xdat over + fa1 swap x2s
          ydat over + fa1 func  ranf fa2 x2x
          ten fa2 f/  fa2 over f+  swap x2s
          i .  xdat over + >fa1 fa1 7 dec. 2 spaces
               ydat  +   >fa1   fa1 7 dec. cr    loop ;

( print matrices for debugging )
: .dmat
  npts 0 do
    npars 0 do  j i derivmat >fa1 fa1 5 dec. loop
    cr loop ;
: .rmat
  npars 0 do
    npars 1+ 0 do  j i resmat >fa1 fa1 5 dec. loop
    cr loop ;

( nonlinear fit, core routine) 
: nlsqfit cr   begin  one_iter cr  new_pars cr  until ;

Appendix: Theoretical background of the curve fitting routine

We want to determine the values of the ai in such a way that the differences between the theoretical function and the measured yk values at times tk become a minimum. These differences are called the residuals rk:

rk = f (tk, a1, a2, a3, .... , an) - yk

and one usually tries to minimize the sum of the squared residuals of all data points.

Lets assume ri are the 'true' residuals that one obtains with the exact ai values. If we estimate the parameters by some initial values ai°, then 'computed' residuals

Rk = f (tk, a1°, a2°, a3°, .... , an°) - yk

can be calculated, which are usually larger than the true ones. To get a correction term that brings the ai° closer to the 'true' ai, one now linearly expands the function f around the estimated value:

f(tk,a1,a2,....,an)

f(tk,a1°,a2°,....,an°) + fk/a1(a1-a1°)

+ fk/a2 (a2-a2°)

. . . . .

+ fk/an(an-an°)

The differences, (ai-ai°), are denoted by ai, now we can write

f(tk,a1,a2,....,an) - yk   
 f(tk,a1°,a2°,....,an°) - yk 
 +  fk/a1 a1 +  fk/a2 a2
 . . . . .
 +  fk/an an

which gives us a relationship between the true and the computed residuals

rk   Rk +  fk/a1 a1 +  fk/a2 a2
 . . . . .
 +  fk/an an .

It is the sum of the squares of the true residuals (N being the number of data points)

that has to be minimized with respect to changes in ai, this means all the derivatives Q/(ai) have to be zero simultaneously. When you evaluate the expressions for the Q/(ai) and set them to zero, you arrive at the equation system that was desribed in the main article.

 

Community Search:
MacTech Search:

Software Updates via MacUpdate

Capto 1.2.9 - $29.99
Capto (was Voila) is an easy-to-use app that takes capturing, recording, video and image editing to the next level. With an intelligent file manager and quick sharing options, Capto is perfect for... Read more
Opera 51.0.2830.40 - High-performance We...
Opera is a fast and secure browser trusted by millions of users. With the intuitive interface, Speed Dial and visual bookmarks for organizing favorite sites, news feature with fresh, relevant content... Read more
GarageSale 7.0.13 - Create outstanding e...
GarageSale is a slick, full-featured client application for the eBay online auction system. Create and manage your auctions with ease. With GarageSale, you can create, edit, track, and manage... Read more
1Password 6.8.7 - Powerful password mana...
1Password is a password manager that uniquely brings you both security and convenience. It is the only program that provides anti-phishing protection and goes beyond password management by adding Web... Read more
Evernote 7.0.1 - Create searchable notes...
Evernote allows you to easily capture information in any environment using whatever device or platform you find most convenient, and makes this information accessible and searchable at anytime, from... Read more
MacUpdate Desktop 6.2.0 - $20.00
MacUpdate Desktop brings seamless 1-click app installs and version updates to your Mac. With a free MacUpdate account and MacUpdate Desktop 6, Mac users can now install almost any Mac app on... Read more
HoudahSpot 4.3.5 - Advanced file-search...
HoudahSpot is a versatile desktop search tool. Use HoudahSpot to locate hard-to-find files and keep frequently used files within reach. HoudahSpot will immediately feel familiar. It works just the... Read more
EtreCheck 4.0.4 - For troubleshooting yo...
EtreCheck is an app that displays the important details of your system configuration and allow you to copy that information to the Clipboard. It is meant to be used with Apple Support Communities to... Read more
WhatsApp 0.2.8361 - Desktop client for W...
WhatsApp is the desktop client for WhatsApp Messenger, a cross-platform mobile messaging app which allows you to exchange messages without having to pay for SMS. WhatsApp Messenger is available for... Read more
iClock 4.2 - Customize your menubar cloc...
iClock is a menu-bar replacement for Apple's default clock but with 100x features. Have your Apple or Google calendar in the menubar. Have the day, date, and time in different fonts and colors in the... Read more

Latest Forum Discussions

See All

The best games like Florence
Florence is a great little game about relationships that we absolutely adored. The only problem with it is it's over a little too soon. If you want some other games with some emotional range like Florence, check out these suggestions: [Read more] | Read more »
Angry Birds Champions adds cash prizes t...
Collaborating with developer Rovio Entertainment, GSN Games has released a twist on the Angry Birds formula. Angry Birds Champions features the same bird-flinging gameplay, but now you can catapult Red and co for cash. | Read more »
Around the Empire: What have you missed...
148Apps is part of a family. A big family of sites that make sure you're always up to date with all the portable gaming news. Just like a real family, I guess. I don't know, my mum never told me anything about Candy Crush to be fair. [Read more] | Read more »
The Battle of Polytopia Guide - Tips for...
The addition of multiplayer to The Battle of Polytopia has catapulted the game from a fun enough time waster to a fully-fledged 4X experience on your phone. We've been playing quite a few matches over the past week or so, and we've put together a... | Read more »
All the best games on sale for iPhone an...
Hi there, and welcome to our round up of all the best games that are on sale for iOS at the moment. It's not a vintage week in terms of numbers, but I'm pretty sure that every single one of these is worth picking up if you haven't already played... | Read more »
Disc Drivin' 2 Guide - Tips for the...
We're all still playing quite a bit of Disc Drivin' 2 over here at 148Apps, and we've gotten pretty good at it. Now that we've spent some more time with the game and unlocked more powerups, check out some of these more advanced tips: | Read more »
Alto's Odyssey Guide - How to Tackl...
Alto’s Odyssey is a completely stunning and serene runner, but it can also be a bit tricky. Check out these to try and keep your cool while playing this endless runner: Don’t focus too much on tasks [Read more] | Read more »
Here's everything you need to know...
Alto's Odyssey is a really, really good game. If you don't believe me, you should definitely check out our review by clicking this link right here. It takes the ideas from the original Alto's Adventure, then subtly builds on them, creating... | Read more »
Alto's Odyssey (Games)
Alto's Odyssey 1.0.1 Device: iOS Universal Category: Games Price: $4.99, Version: 1.0.1 (iTunes) Description: Just beyond the horizon sits a majestic desert, vast and unexplored. Join Alto and his friends and set off on an endless... | Read more »
Vainglory 5v5: Everything you need to kn...
Vainglory just got bigger. [Read more] | Read more »

Price Scanner via MacPrices.net

Sale! Amazon offers 13″ 2.3GHz MacBook Pros f...
Amazon has 2017 13″ 2.3GHz Apple MacBook Pros on sale today for $151-$150 off MSRP, each including free shipping: – 13″ 2.3GHz/128GB Space Gray MacBook Pro (MPXQ2LL/A): $1148 $151 off MSRP – 13″ 2.... Read more
Apple AirPods in stock today for $159, free s...
Adorama reports stock of Apple AirPods today for $159 including free shipping, plus pay no sales tax outside of NY & NJ. See our Apple AirPod Price Tracker for the latest prices and stock status... Read more
Saturday Sale: Amazon offers 12″ 1.3GHz MacBo...
Amazon has Silver and Gold 2017 12″ 1.3GHz Retina MacBooks on sale for $250 off MSRP. Shipping is free: – 12″ 1.3GHz Silver MacBook: $1349.99 $250 off MSRP – 12″ 1.3GHz Gold MacBook: $1349.99 $250... Read more
Use your Apple Education discount and save up...
Purchase a new Mac using Apple’s Education discount, and take up to $400 off MSRP. All teachers, students, and staff of any educational institution with a .edu email address qualify for the discount... Read more
Apple Canada offers 2017 21″ and 27″ iMacs fo...
 Canadian shoppers can save up to $470 on the purchase of a 2017 current-generation 21″ or 27″ iMac with Certified Refurbished models at Apple Canada. Apple’s refurbished prices are the lowest... Read more
9″ iPads available online at Walmart for $50...
Walmart has 9.7″ Apple iPads on sale for $50 off MSRP for a limited time. Sale prices are for online orders only, in-store prices may vary: – 9″ 32GB iPad: $279.99 $50 off – 9″ 128GB iPad: $379.99 $... Read more
15″ Apple MacBook Pros, Certified Refurbished...
Save $360-$420 on the purchase of a 2017 15″ MacBook Pro with Certified Refurbished models at Apple. Apple’s refurbished prices are the lowest available for each model from any reseller. An standard... Read more
Amazon restocks MacBook Pros with models avai...
Amazon has restocked 15″ and 13″ Apple MacBook Pros with models on sale for up to $251 off MSRP. Shipping is free. Note that stock of some Macs may come and go (and some sell out quickly), so check... Read more
Lowest price of the year: 15″ 2.8GHz Apple Ma...
Amazon has the 2017 Space Gray 15″ 2.8GHz MacBook Pro on sale today for $251 off MSRP. Shipping is free: – 15″ 2.8GHz Touch Bar MacBook Pro Space Gray (MPTR2LL/A): $2148, $251 off MSRP Their price is... Read more
Apple restocks full line of Certified Refurbi...
Apple has restocked a full line of Apple Certified Refurbished 2017 13″ MacBook Pros for $200-$300 off MSRP. A standard Apple one-year warranty is included with each MacBook, and shipping is free.... Read more

Jobs Board

*Apple* Media Products Commerce Engineering...
# Apple Media Products Commerce Engineering Manager Job Number: 56207285 Santa Clara Valley, California, United States Posted: 26-Jan-2018 Weekly Hours: 40.00 **Job Read more
Digital Platforms Lead, Today at *Apple* -...
# Digital Platforms Lead, Today at Apple Job Number: 56178747 Santa Clara Valley, California, United States Posted: 23-Feb-2018 Weekly Hours: 40.00 **Job Summary** Read more
*Apple* Retail - Multiple Positions - Apple,...
Job Description:SalesSpecialist - Retail Customer Service and SalesTransform Apple Store visitors into loyal Apple customers. When customers enter the store, Read more
*Apple* Retail - Multiple Positions - Apple,...
Job Description: Sales Specialist - Retail Customer Service and Sales Transform Apple Store visitors into loyal Apple customers. When customers enter the store, Read more
*Apple* Retail - Multiple Positions - Apple,...
Job Description:SalesSpecialist - Retail Customer Service and SalesTransform Apple Store visitors into loyal Apple customers. When customers enter the store, Read more
All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.