TweetFollow Us on Twitter

Storage Interconnect Technologies

Volume Number: 21 (2005)
Issue Number: 9
Column Tag: Programming

Media Exchange: Storage Interconnect Technologies

A Quick Reference and Guide to IDE/ATA, SATA, eSATA, SCSI, SAS, Fibre, IEEE 1394, USB and RAID Technologies

by Emmanuel Stein

Introduction

With all of the exisiting storage interfaces to choose from, Mac professionals are routinely faced with a bewildering array of technology and configuration options. Moreover, with Apple's entrance into the high-end enterprise server market, the identification and implementation of the array of extant interconnect technologies has become an increasingly complex task. This article represents a compass for Mac professionals to navigate the maze of available solutions. Using a modified glossary-style format, each technology is defined in detail with practical commentary on the application of the various technologies covered. Whenever appropriate, I reference how these technologies apply to the Mac and give readers a sense of what technologies are being developed and which ones will likely be supplanted in the near term.

Parallel ATA (IDE/ATA)

Advanced Technology Attachment (ATA) is a parallel interface for connecting internal storage devices to personal computers and has many aliases including ATA/ATAPI, EIDE, ATA-2, Fast ATA, ATA-3, Ultra ATA, and Ultra DMA. ATA supports two devices per bus with only one drive able to access said bus at a time. ATA-7 (ATA-133), the current and final revision of the ATA specification, supports a maximum data transfer rate of 133 MBytes/sec across an 18-inch cable. Although ATA is best suited to low cost consumer storage solutions, it has been successfully adapted to the enterprise market, via clever hardware engineering on Apple's part in their Xserve RAID product, which overcomes many of the shortcomings of ATA. Every ATA drive in the Xserve RAID is connected to a dedicated bus, with two independent and non-redundant controllers that support non-native Tagged Command Queuing, an essential feature for enterprise-grade storage solutions. PATA is, nevertheless, a technology of the past and, though it is still employed in low end Macs and other devices, it is being replaced by its serial counterpart.

Serial ATA (SATA)

SATA is quickly replacing parallel ATA as the internal storage interface of choice for desktop machines and low cost server solutions. SATA made its Mac debut in Apple's PowerMac G5 line and has been extended the new iMac line. SATA has also been used in newer Xserves, with the notable exception of the Xserve RAID. SATA remains compatible, on the software level, with ATA and, therefore, all the existing firmware, operating systems, and applications that work with ATA will also work with SATA. SATA advantages include point-to-point interconnect that enables full bandwidth for each drive, native command queuing, lower voltage requirements, hot-plug capability, thin cabling, longer cable length, faster transfer rate and CRC error checking. These added features make SATA suitable for cost sensitive server deployments.

    SATA - maximum transfer rate is 150MBytes/sec over a cable up to 1 meter long

    SATA II - maximum transfer rate is 300MBytes/sec over a cable up to 1 meter long

    SATA-III - maximum transfer rate is 600MBytes/sec (will be available in 2007)

External SATA (eSATA)

ESATA is an emerging external storage interface extension to SATA, which offers an inexpensive and faster external storage solution and is poised to overtake FireWire disk implementations, so common in the today's Mac environments. Currently, eSATA supports a maximum transfer rate of 150MBytes /sec and has a maximum cable length of 2 meters.

Parallel Small Computer System Interface (SCSI)

Parallel SCSI, better known as just plain SCSI, is a parallel bus technology that connects a variety of peripherals to one's computer. Parallel SCSI can support up to 16 devices on a single bus. Although it offers faster throughput and comes with more advanced drive features than ATA, its price to performance ratio leaves something to be desired. SCSI's parallel nature makes it hard to deploy in larger environments and the technology has reached its practical performance limit. Ultra 320 is the last line in the evolution of parallel SCSI and supports a maximum transfer rate of 320MBytes/sec over a cable up to 12 meters in length. Although SCSI has dominated the enterprise market for the past two decades, SAS represents a natural evolution of the technology, which is likely to eclipse SCSI in the near term.

Serial Attached SCSI (SAS)

SAS is a serial implementation of SCSI that is designed to extend the existing capabilities of parallel SCSI and enables compatibility with Serial ATA. SAS allows users to interconnect either SATA or SAS hard disks within an expander that can be configured to support up to 16,256 mixed drives An essential component of the SAS infrastructure, expanders enable scalable storage with extended distances between devices and support for multiple device attachment to multiple host initiators, thereby affording fault tolerance. The maximum cable length of SAS is 10 meters. SAS also supports smaller storage devices such as 2.5-inch drives. Its point-to-point configuration and highly scalable architecture makes SAS an advanced, high-cost enterprise-class solution for applications that do not require the long cable lengths associated with Fibre technologies.

    SAS 300 - maximum transfer rate is 300MBytes/sec

    SAS 600 - maximum transfer rate is 600MBytes/sec (will be available in 2007)

    SAS 1200 - maximum transfer rate is 1200MBytes/sec (will be available in 2010)

Fibre Channel (FC)

Fibre Channel is a serial bus interface for high-speed storage solutions. It is interoperable with SCSI, IP, ATM, HIPPI and IEEE 802.2 protocols and offers a maximum data transfer rate of 400 MBytes/sec, with a maximum length of 30 meters over copper and 10 kilometers using optical. Fibre Channel offers point-to-point, switched, and loop interfaces. Via arbitrated loop (FC-AL), fibre channel can support up to 127 devices and up to 15,663,104 using switched fabric. Fibre has been increasingly deployed for enterprise applications such as SAN (Storage Area Network), which benefit from Fibre Channel-specific features like long cable length and capacious device support.

FireWire/IEEE-1394/i.Link

FireWire is a high-speed serial bus developed by Apple. It offers simple connectivity for multimedia peripherals such as digital video cameras, iPods and high-performance storage. FireWire can connect up to 63 devices on a single bus and supports hot-swapping. FireWire was originally designed for streaming digital video and, therefore, was not implemented with heavy file serving in mind, with its frequent random reads and writes. FireWire hard drives have been widely deployed as an inexpensive backup solution, particularly in Mac environments. Although cable length is limited to 4.5 meters, distances up to 50 meters can be achieved using plastic optical fibre (POF) and 100 meters with hard polymer or glass-based fiber cabling. Although, not considered an enterprise grade solution, Apple's popularization and support for this technology, have gone a long way to legitimizing its use in the enterprise, as well as, home environments.

    FireWire 400 - maximum transfer rate is 400 MBits/sec

    FireWire 800 - maximum transfer rate is 800 MBits/sec

Universal Serial Bus (USB)

USB is designed for a variety of peripheral interconnect applications. A single USB channel can connect up to 127 devices with a maximum cable length of 5 meters. External USB-based hard drives are popular among PC users since FireWire does not typically come standard. Although used in many third party storage solutions, USB-based hard drives not appropriate for server or other high-end applications like digital video and file serving.

    USB 1.1 - maximum transfer rate is 12 MBits/sec

    USB 2.0 (Hi-speed USB) - maximum transfer rate is 480 MBits/sec

Redundant Array of Independent Disks (RAID)

RAID is a method of consolidating multiple drives into Logical Units (LUNs). RAID can be implemented using extant hard drive technologies, including SCSI, SATA, and ATA. Depending on the particular RAID configuration used, benefits will include increased data integrity and redundancy, facilitated disk cluster management, fault-tolerance, and improved throughput. RAID solutions are commonly used in the enterprise and have now gained a foothold in the high-end consumer market.

    RAID 0 - also known as striping, splits data evenly across all drives and lacks parity information for redundancy. It increases performance in read and write operations, but introduces an increased rate of failure with each disk added. RAID 0 is recommended for applications that are not data critical but require high speed such as audio and video streaming and editing, graphic design and high-end gaming systems.

    RAID 1 - aka mirroring creates an exact copy of the data on two or more disks. It increases performance in read operations but imposes a small penalty for write operations. RAID 1's inefficient use of the disk space is considered its main drawback. It is well suited, however, to data critical applications in which superior reliability is required.

    RAID 0+1 - a combination of RAID 0 and RAID 1, a mirror of stripes. Benefits include increased performance in read and write operations while maintaining data redundancy. Disadvantages include high cost and limited scalability. Performance is severely degraded during recovery, since all disks in an array must participate in the rebuilding process. RAID 0+1 is recommended for imaging applications and general fileserver tasks that require high performance but do not demand maximum redundancy,

    RAID 3 - byte-level striping with a dedicated parity disk. Its random read/write performance is poor due to byte-level striping, parity calculation overhead and the bottleneck of a dedicated parity drive. RAID 3 is useful for applications that deal with large files such as video editing and prepress, which benefit from increased performance with redundancy.

    RAID 5 - data and parity information are striped across all drives. It is the most popular of the RAID configurations because it provides a good balance between availability, capacity, data protection and performance relative to other RAID implementations. RAID 5 is often employed in transaction processing applications such as web, e-mail, and news servers, where large numbers of users access information concurrently.

    RAID 10 - a combination of RAID 1 and RAID 0, a stripe of mirrors. It is very costly to deploy and suffers from limited scalability. Unique advantages include rapid data transfer, with its striped array, and superior data redundancy. RAID 10 is used in database solutions that require high performance and fault tolerance.

    RAID 50 - block striping with the distributed parity of RAID 5 combined with the block striping of RAID 0. This combination achieves fast transfer rates via distributed parity and is very costly to implement. RAID 50 is only recommended for data critical applications that require high fault tolerance with fast read/write operations.


Emmanuel Stein has been an avid Mac user since 1984 and has honed his cross-platform skills while working at France Telecom, Time Magazine and Reed-Elsevier. He has recently started his own Mac-centric consulting company, MacVerse, which offers implementation, system administration and development services geared towards the enterprise market. As a diehard GNU/Linux geek, he enjoys hacking open source software and experimenting with new open source projects on OS X. You may reach him at macverse@mac.com


What's the best direction?

Now that you have a better idea as to what all the different technologies are with their strengths and weaknesses, which do you use? Unfortunately, there is no one easy answer, but we thought we'd give you one example of a way to take advantage of these technologies.

Here at MacTech Magazine, we're always bringing in new equipment and replacing old stuff. It's part of the magazine process. Recently, we decommissioned an older Power Mac G4 tower machine, which was running perfectly fine, and was wondering what to do with it. As a 450MHz G4, it wasn't fast enough to be a workstation, but it was plenty fast to be aserver ... depending on the type.

We chose to turn it into another file server. We installed Mac OS X Server on it, gave it 768MB of RAM, and then started to look and see what disks we could put into it. The problem with the older machines is that they, many times, don't support drives larger than 128GB, and we weren't going to invest in drives that small.

Instead of investing in old technology, we decided to combine the best of new and old. In this case, we went with SATA drives from Maxtor. Why SATA? Well, for starters, they break the 128GB barrier as a general rule.

And, these Maxtor drives are designed to live for a minimum of 5 years. Meaning that even though these are going in an older machine, we're investing in technology that will be useful for a while. We can use these drives for something else down the road. This is one of the best reasons to go with SATA instead of Ultra ATA.

Specifically, we went with the Maxtor DiamondMax 10. These Serial ATA drives feature a 16MB buffer, at 7200 RPM, and a data transfer rate of 150 MBps. At time of writing, street prices are between $110 and $160 for these drives making them a cost effective solution.

But my machine doesn't support SATA!

Yep, none of the older ones do. No worries. You can get an inexpensive SATA PCI card for around $50. In our case, we used one from Sonnet, and attached two SATA drives to the one cord. Don't forget, both the interface cables and the power cables are different than ATA. You'll need a power adapter cable, and SATA interface cables if they don't come with your card.

What else is cool out there?

Maxtor has some other cool stuff as well. The Maxtor Shared Storage drive is a budget conscious way to share files. It's basically, a low cost file server that you attach to your network, is automatically configured (and can be further configured in a web interface) and can even help you share two USB printers. They come in 200 and 300 GB versions.

Maxtor also has some great "OneTouch" devices which you can use as either an external drive, or as an easy way to do a "one touch" backup. The Maxtor OneTouch II, FireWire 800 Edition actually sports a triple interface: FireWire 800, FireWire 400 and USB 2.0. Its Mac bootable feature turns a drive into a bootable system drive. It includes a simple user interface and automated back-up software so you can designate a portion of drive for high-performance storage and the other portion for backing up critical data. Two capacities: 200 GB (MSRP: $229.95); 300 GB(MSRP: $319.95)


by Neil Ticktin, publisher of MacTech Magazine.

 

Community Search:
MacTech Search:

Software Updates via MacUpdate

GraphicConverter 10.5.4 - $39.95
GraphicConverter is an all-purpose image-editing program that can import 200 different graphic-based formats, edit the image, and export it to any of 80 available file formats. The high-end editing... Read more
Dash 4.1.3 - Instant search and offline...
Dash is an API documentation browser and code snippet manager. Dash helps you store snippets of code, as well as instantly search and browse documentation for almost any API you might use (for a full... Read more
Microsoft OneNote 16.9 - Free digital no...
OneNote is your very own digital notebook. With OneNote, you can capture that flash of genius, that moment of inspiration, or that list of errands that's too important to forget. Whether you're at... Read more
DEVONthink Pro 2.9.17 - Knowledge base,...
Save 10% with our exclusive coupon code: MACUPDATE10 DEVONthink Pro is your essential assistant for today's world, where almost everything is digital. From shopping receipts to important research... Read more
OmniGraffle 7.6 - Create diagrams, flow...
OmniGraffle helps you draw beautiful diagrams, family trees, flow charts, org charts, layouts, and (mathematically speaking) any other directed or non-directed graphs. We've had people use Graffle to... Read more
iFinance 4.3.7 - Comprehensively manage...
iFinance allows you to keep track of your income and spending -- from your lunchbreak coffee to your new car -- in the most convenient and fastest way. Clearly arranged transaction lists of all your... Read more
Opera 50.0.2762.58 - High-performance We...
Opera is a fast and secure browser trusted by millions of users. With the intuitive interface, Speed Dial and visual bookmarks for organizing favorite sites, news feature with fresh, relevant content... Read more
Microsoft Office 2016 16.9 - Popular pro...
Microsoft Office 2016 - Unmistakably Office, designed for Mac. The new versions of Word, Excel, PowerPoint, Outlook and OneNote provide the best of both worlds for Mac users - the familiar Office... Read more
SoftRAID 5.6.4 - High-quality RAID manag...
SoftRAID allows you to create and manage disk arrays to increase performance and reliability. SoftRAID allows the user to create and manage RAID 4 and 5 volumes, RAID 1+0, and RAID 1 (Mirror) and... Read more
OmniGraffle Pro 7.6 - Create diagrams, f...
OmniGraffle Pro helps you draw beautiful diagrams, family trees, flow charts, org charts, layouts, and (mathematically speaking) any other directed or non-directed graphs. We've had people use... Read more

Latest Forum Discussions

See All

Around the Empire: What have you missed...
Around this time every week we're going to have a look at the comings and goings on the other sites in Steel Media's pocket-gaming empire. We'll round up the very best content you might have missed, so you're always going to be up to date with the... | Read more »
The 7 best games that came out for iPhon...
Well, it's that time of the week. You know what I mean. You know exactly what I mean. It's the time of the week when we take a look at the best games that have landed on the App Store over the past seven days. And there are some real doozies here... | Read more »
Popular MMO Strategy game Lords Mobile i...
Delve into the crowded halls of the Play Store and you’ll find mobile fantasy strategy MMOs-a-plenty. One that’s kicking off the new year in style however is IGG’s Lords Mobile, which has beaten out the fierce competition to receive Google Play’s... | Read more »
Blocky Racing is a funky and fresh new k...
Blocky Racing has zoomed onto the App Store and Google Play this week, bringing with it plenty of classic kart racing shenanigans that will take you straight back to your childhood. If you’ve found yourself hooked on games like Mario Kart or Crash... | Read more »
Cytus II (Games)
Cytus II 1.0.1 Device: iOS Universal Category: Games Price: $1.99, Version: 1.0.1 (iTunes) Description: "Cytus II" is a music rhythm game created by Rayark Games. It's our fourth rhythm game title, following the footsteps of three... | Read more »
JYDGE (Games)
JYDGE 1.0.0 Device: iOS Universal Category: Games Price: $4.99, Version: 1.0.0 (iTunes) Description: Build your JYDGE. Enter Edenbyrg. Get out alive. JYDGE is a lawful but awful roguehate top-down shooter where you get to build your... | Read more »
Tako Bubble guide - Tips and Tricks to S...
Tako Bubble is a pretty simple and fun puzzler, but the game can get downright devious with its puzzle design. If you insist on not paying for the game and want to manage your lives appropriately, check out these tips so you can avoid getting... | Read more »
Everything about Hero Academy 2 - The co...
It's fair to say we've spent a good deal of time on Hero Academy 2. So much so, that we think we're probably in a really good place to give you some advice about how to get the most out of the game. And in this guide, that's exactly what you're... | Read more »
Everything about Hero Academy 2: Part 3...
In the third part of our Hero Academy 2 guide we're going to take a look at the different modes you can play in the game. We'll explain what you need to do in each of them, and tell you why it's important that you do. [Read more] | Read more »
Everything about Hero Academy 2: Part 2...
In this second part of our guide to Hero Academy 2, we're going to have a look at the different card types that you're going to be using in the game. We'll split them up into different sections too, to make sure you're getting the most information... | Read more »

Price Scanner via MacPrices.net

Apple restocked Certified Refurbished 13″ Mac...
Apple has restocked a full line of Certified Refurbished 2017 13″ MacBook Airs starting at $849. An Apple one-year warranty is included with each MacBook, and shipping is free: – 13″ 1.8GHz/8GB/128GB... Read more
How to find the lowest prices on 2017 Apple M...
Apple has Certified Refurbished 13″ and 15″ 2017 MacBook Pros available for $200 to $420 off the cost of new models. Apple’s refurbished prices are the lowest available for each model from any... Read more
The lowest prices anywhere on Apple 12″ MacBo...
Apple has Certified Refurbished 2017 12″ Retina MacBooks available for $200-$240 off the cost of new models. Apple will include a standard one-year warranty with each MacBook, and shipping is free.... Read more
Apple now offering a full line of Certified R...
Apple is now offering Certified Refurbished 2017 10″ and 12″ iPad Pros for $100-$190 off MSRP, depending on the model. An Apple one-year warranty is included with each model, and shipping is free: –... Read more
27″ iMacs on sale for $100-$130 off MSRP, pay...
B&H Photo has 27″ iMacs on sale for $100-$130 off MSRP. Shipping is free, and B&H charges sales tax for NY & NJ residents only: – 27″ 3.8GHz iMac (MNED2LL/A): $2199 $100 off MSRP – 27″ 3.... Read more
2.8GHz Mac mini on sale for $899, $100 off MS...
B&H Photo has the 2.8GHz Mac mini (model number MGEQ2LL/A) on sale for $899 including free shipping plus NY & NJ sales tax only. Their price is $100 off MSRP. Read more
Apple offers Certified Refurbished iPad minis...
Apple has Certified Refurbished 128GB iPad minis available today for $339 including free shipping. Apple’s standard one-year warranty is included. Their price is $60 off MSRP. Read more
Amazon offers 13″ 256GB MacBook Air for $1049...
Amazon has the 13″ 1.8GHz/256B #Apple #MacBook Air on sale today for $150 off MSRP including free shipping: – 13″ 1.8GHz/256GB MacBook Air (MQD42LL/A): $1049.99, $150 off MSRP Read more
9.7-inch 2017 WiFi iPads on sale starting at...
B&H Photo has 9.7″ 2017 WiFi #Apple #iPads on sale for $30 off MSRP for a limited time. Shipping is free, and pay sales tax in NY & NJ only: – 32GB iPad WiFi: $299, $30 off – 128GB iPad WiFi... Read more
Wednesday deal: 13″ MacBook Pros for $100-$15...
B&H Photo has 13″ #Apple #MacBook Pros on sale for up to $100-$150 off MSRP. Shipping is free, and B&H charges sales tax for NY & NJ residents only: – 13-inch 2.3GHz/128GB Space Gray... Read more

Jobs Board

*Apple* Store Leader - Retail District Manag...
Job Description: Job Summary As more and more people discover Apple , they visit our retail stores seeking ways to incorporate our products into their lives. It's Read more
Sr. Experience Designer, Today at *Apple* -...
# Sr. Experience Designer, Today at Apple Job Number: 56495251 Santa Clara Valley, California, United States Posted: 18-Jan-2018 Weekly Hours: 40.00 **Job Summary** Read more
Security Applications Engineer, *Apple* Ret...
# Security Applications Engineer, Apple Retail Job Number: 113237456 Santa Clara Valley, California, United States Posted: 17-Jan-2018 Weekly Hours: 40.00 **Job Read more
*Apple* Solutions Consultant - Apple (United...
# Apple Solutions Consultant Job Number: 113384559 Brandon, Florida, United States Posted: 10-Jan-2018 Weekly Hours: 40.00 **Job Summary** Are you passionate about Read more
Art Director, *Apple* Music + Beats1 Market...
# Art Director, Apple Music + Beats1 Marketing Design Job Number: 113258081 Santa Clara Valley, California, United States Posted: 05-Jan-2018 Weekly Hours: 40.00 Read more
All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.