TweetFollow Us on Twitter

An Introduction to Builds

Volume Number: 21 (2005)
Issue Number: 4
Column Tag: Programming

An Introduction to Builds

by Clay Williams

Creating and Using Builds in Mac OS X

Five years ago my employer at the time purchased roughly 650 G4 Cubes. Each of those gleaming fanless little boxes needed to be customized for our environment. Bookmarks had to be created, homepages set, network preferences entered. Our standard application suites had to be installed and configured. This had to be done six hundred and fifty times. No problem. Clearly, since I am still in IT, we didn't have to do this manually. We had a build. Most people in IT are familiar with the concept of a build: a snapshot of a system configuration that is saved and applied to other machines. It's a fairly simple concept. Anyone who's worked in a larger environment has had to image machines at some point. For some reason though, we often forget about builds in smaller settings.

We tend to consider actually creating a build as a particularly complex undertaking. It's perceived as a job that requires a bigger staff or any staff at all to do right. Many admins think that creating a build takes up a lot of time. While it is possible to spend weeks creating an intricate build that customizes nearly every aspect of the OS, it is hardly required. Do as much or as little as you'd like. At the heart of build making is the desire to save time by reducing repetition. Why perform the same tasks five times or five hundred times? If you've done it once, you may have already done all you need to do. Even if all you need is a clean install of the OS, imaging a machine is usually faster than Apple's installer discs. On top of that, you can set network preferences or create an administrative user or delete an application that your users could wreak havoc with (NetInfo Manager anyone?). If there's something you'd like every machine in your environment to do - or not do - chances are you could be greatly assisted by a build.

One big stigma that builds have yet to overcome is a leftover from the days of OS 9. I remember looking at a folder full of disc images trying to figure out which one I needed. They were all of the same OS, but only one of them would do me any good. Back then builds had to be managed for different hardware. Laptops required one build, desktops another; assorted graphics cards used conflicting drivers so each needed a build. OS X has so far eliminated this. These days a build made on a laptop can typically work on anything else that will boot the OS. Take your build home with you, work on it while you commute. It will still work on the towers in the office. New hardware may require an update to boot, but that is easily remedied. If you have a new computer that won't boot from your build, use the installer on the discs that came with the machine to update the build. Use the install in place option with your build volume as the destination.

Following these steps, you can create your own build. See for yourself how straight forward the process can be and how valuable the result.

What you'll need.

Below are the tools needed to create a basic build. All the utilities used are free and available on the Internet.

Hardware:

  • 1 firewire drive, with four partitions, A,B, C and D, at least 10 GB each. Partition A must have a bootable OS X system installed.
  • A machine that will boot the most recent iteration of the OS.

Software:

  • Onyx: (http://www.titanium.free.fr/english.html) A freeware utility that provides a GUI to various command line applications and hidden features. It can clear your caches, optimize your disk and run maintenance jobs at will.
  • Carbon Copy Cloner (http://www.bombich.com):
  • Disk Utility: Apple's updated combination of Disk First Aid, Drive setup and Disk Copy. It also integrates the features of Apple Software Restore, which we will be using to implement the image.

Preparation:

On the bootable partition (A) of your firewire drive install Onyx and Carbon Copy Cloner - they are both drag installs and can be run from any folder.

Step one: Installation.

Boot your Mac from an OS X installation disc. Use volume B as the destination. Choose your preferred installation options. Install OS X. Restart using partition B as the startup disk.

Step Two: Configuration.

Create initial administrative user using Apple Setup Assistant. Configure as desired. This user will be your administrative user. You, or other techs, can use this account for later installations and testing. I prefer to customize this account with utilities in the dock and bookmarks to frequently used Mac sites.

DO NOT install software on your build that you are not properly licensed for. It's illegal. Some applications do not prompt for a serial number until they are first run. You may want to install the unlicensed product on the build. After imaging the machine you'll just need to run the application and enter the serial numbers individually.

In the customization section, there is a list of ways you may want to configure your build. None is required, do as much or as little as you'd like.

Step Three: There is no step three.

Step Four: Clean up.

Clear your browser history, delete recent searches in Find File, and other applications. Toss the preferences in all By Host preferences folders. Get rid of anything you don't want on everyone's machines. Carbon Copy Cloner will take care of a good deal of the necessary clean up just by excluding certain unnecessary files when it creates your Disk Image. Onyx is a bit more thorough. If you have not installed it on your build, you can run it from partition A. Use it to clear out cache folders, optimize the disk, run scheduled maintenance jobs, clear log files and delete .DS Store files. A manual once over, checking applications and clearing recent activity is a good idea anyway.

Step Five: Create your image.

Reboot your Mac, starting up from partition A. Run Carbon Copy Cloner. Select Partition B as the source. Select partition D as the target. Click the preferences button. Select the "Create a disk image on target" check box. Also check "Prepare for Apple Software Restore." If you haven't made any peculiar permission changes, you should probably check "Repair permissions before cloning".

If your users are going to have administrator rights and you want them to set up their accounts themselves, you can check the "Run Setup Assistant after restore" box. A new account will be created in addition to your default admin user you initially created. Users will go through the whole setup process. This could be convenient if you are setting up a machine for users in a remote office.

Click Save. Click the lock to authenticate as the administrator and then Clone.


Figure 1: Carbon Copy Cloner


Figure 2: Carbon Copy Cloner Preferences.

Step Six: Congratulations, it's a build.

"The clone operation is complete" will appear on your screen. Click OK. Quit Carbon Copy Cloner.

Launch Disk Utility. Erase a volume on your internal hard drive. Drag your build to the volumes field on the left. Click the Restore tab. Drag the disk image of your build from the volumes field to the source field. Drag the internal drive volume to the destination field. Click Restore. All this can be done from the command line as well using the asr command. Read the asr man pages for more information.


Figure 3: Disk Utility's Restore Pane

Once the restore is complete, select the internal volume as the startup disk. This is important, as the System needs to be 'blessed' by Startup Disk.

Restart your machine.

Your machine is now imaged. Test it out; make sure it works the way you'd like it to. If there's anything you want to change, go back to the original and adjust accordingly. Once you're happy with the build, repeat Step Six to your heart's desire. Backup the disk image of the build to a server or some other safe location.

Below is a list of configuration options you may want to consider in Step 2.

  • Set network preferences for your environment. If the machines you will be imaging need different network settings, add them all and use location manager to switch between them. Remember that the Network preference pane allows you to prioritize Network interfaces. One location can include the remote settings for a modem, the office settings for Ethernet and a setting for Airport that works for both.
  • Set the root password. Every administrator has a different opinion about whether root should be enabled or even used ever. Regardless, you should at least set the root password. Since every administrator can do this, it's better that you do it first. Launch NetInfo Manager, select enable root user under the Security menu. You will be prompted to set the password. Afterwards you can disable it.
  • Set a master password for FileVault before your users do. Apple added this feature in Panther to appease those looking for total security. Home folders are encrypted and decrypted on the fly keeping your data secure in case of loss or theft. This is probably a great feature - if you trust your users to remember their password. If, however, your users tend to forget their passwords after a long weekend, it may not be a great idea. The master password is your key to recovering this data if the user password is not available. Again, even if you never plan to use this feature, it's better to set from the start.


Figure 4: Set your Master Password in the Security Pane

  • Disable automatic login. OS 9 users may be used to getting right to their desktops at startup, but it's not terribly secure. In fact, it's totally insecure. Times change, our users' habits will have to as well.
  • Create a hidden admin. An administrator account that's off the radar can be handy if you are concerned with a user, malicious or otherwise, who might somehow disable your access. You can give this account remote administration rights as you see fit. In order to do this, create an account, configure the Apple Remote Desktop preferences as you'd like them. In NetInfo Manager, set the uid to an unused number below 500. Change the group to 80 (admin), deleting the default group assigned to the account. Set the home folder to /var/tmp/ which is cleared at shutdown. Delete the original home folder. When you restart, the account will not be listed in the accounts pane or any accounts list outside of the NetInfo Manager.
  • Remove NetInfo Manager. This may seem heavy handed, but keep in mind that NetInfo Manager can be run from another volume if you find that you need it.
  • Add Property List Editor. One of many useful tools you will find in Apple's Developer's Tools, it reads plist files natively. It makes reading and editing preference files a lot easier than learning xml. The program is a drag install and can be run from the admin's folder if you'd prefer your users do not fiddle with it.


Figure 5: Property List Editor provides an easier interface for editing .plist files.

  • Set LDAP server information. If you are using an Apple Open Directory Server for user management, you can set Directory Access to point to your server. As soon as a machine is imaged with this build, users would be able to login using their Workgroup Manager credentials. All preferences dictated by the server will be respected.
  • Manage fonts. Install a basic set of fonts that all users will always need, put them in the /User/Library/Fonts folder. Or strip down the fonts here If you will be using a font management system, so they do not conflict with the fonts your users may load.

There are, of course, more advanced options. If you'd like, you can customize the preference of every user that will exist on the machine, setting bookmarks and desktop patterns, dock items and desktop aliases for all new users. In a future piece we will discuss where these preferences are and the best ways to edit them. In the meantime, try out the above configurations or come up with other ways to customize your build for your environment.


Clay Williams is a Senior Systems Analyst for ESPN Magazine and ESPN.com. He has supported Macs professionally for 6 years. Clay lives in New York City, the bright center of the universe, but travels to the hinterlands often.

 

Community Search:
MacTech Search:

Software Updates via MacUpdate

MacFamilyTree 8.2.7 - Create and explore...
MacFamilyTree gives genealogy a facelift: modern, interactive, convenient and fast. Explore your family tree and your family history in a way generations of chroniclers before you would have loved.... Read more
WhatsApp 0.2.8000 - Desktop client for W...
WhatsApp is the desktop client for WhatsApp Messenger, a cross-platform mobile messaging app which allows you to exchange messages without having to pay for SMS. WhatsApp Messenger is available for... Read more
TotalFinder 1.10.7 - Adds tabs, hotkeys,...
TotalFinder is a universally acclaimed navigational companion for your Mac. Enhance your Mac's Finder with features so smart and convenient, you won't believe you ever lived without them. Features... Read more
Box Sync 4.0.7886 - Online synchronizati...
Box Sync gives you a hard-drive in the Cloud for online storage. Note: You must first sign up to use Box. What if the files you need are on your laptop -- but you're on the road with your iPhone? No... Read more
Espresso 5.1 - Powerful HTML, XML, CSS,...
Note from the developer: For the new Espresso, we changed our versioning and licensing approach with more consistent pricing and a simpler development timeline: "X+1". Each new update would increase... Read more
VueScan 9.6.04 - Scanner software with a...
VueScan is a scanning program that works with most high-quality flatbed and film scanners to produce scans that have excellent color fidelity and color balance. VueScan is easy to use, and has... Read more
Slack 3.0.5 - Collaborative communicatio...
Slack is a collaborative communication app that simplifies real-time messaging, archiving, and search for modern working teams. Version 3.0.5: Bug Fixes: An important security update. Security... Read more
VirtualBox 5.2.6 - x86 virtualization so...
VirtualBox is a family of powerful x86 virtualization products for enterprise as well as home use. Not only is VirtualBox an extremely feature rich, high performance product for enterprise customers... Read more
Vivaldi 1.13.1008.40 - An advanced brows...
Vivaldi is a browser for our friends. In 1994, two programmers started working on a web browser. Our idea was to make a really fast browser, capable of running on limited hardware, keeping in mind... Read more
WhatRoute 2.1.1 - Geographically trace o...
WhatRoute is designed to find the names of all the routers an IP packet passes through on its way from your Mac to a destination host. It also measures the round-trip time from your Mac to the router... Read more

Latest Forum Discussions

See All

JYDGE (Games)
JYDGE 1.0.0 Device: iOS Universal Category: Games Price: $4.99, Version: 1.0.0 (iTunes) Description: Build your JYDGE. Enter Edenbyrg. Get out alive. JYDGE is a lawful but awful roguehate top-down shooter where you get to build your... | Read more »
Tako Bubble guide - Tips and Tricks to S...
Tako Bubble is a pretty simple and fun puzzler, but the game can get downright devious with its puzzle design. If you insist on not paying for the game and want to manage your lives appropriately, check out these tips so you can avoid getting... | Read more »
Everything about Hero Academy 2 - The co...
It's fair to say we've spent a good deal of time on Hero Academy 2. So much so, that we think we're probably in a really good place to give you some advice about how to get the most out of the game. And in this guide, that's exactly what you're... | Read more »
Everything about Hero Academy 2: Part 3...
In the third part of our Hero Academy 2 guide we're going to take a look at the different modes you can play in the game. We'll explain what you need to do in each of them, and tell you why it's important that you do. [Read more] | Read more »
Everything about Hero Academy 2: Part 2...
In this second part of our guide to Hero Academy 2, we're going to have a look at the different card types that you're going to be using in the game. We'll split them up into different sections too, to make sure you're getting the most information... | Read more »
Everything about Hero Academy 2: Part 1...
So you've started playing Hero Academy 2, and you're feeling a little bit lost. Don't worry, we've got your back. So we've come up with a series of guides that are going to help you get to grips with everything that's going on in the game. [Read... | Read more »
What mobile gaming can learn from the Ni...
While Nintendo might not have had things all its own way since it began developing for mobile, one thing it has got right is the release of the Switch. After the disappointment of the WiiU, which I still can't really explain, the Switch felt a... | Read more »
Programmer of Sonic The Hedgehog launche...
Japanese programmer Yuji Naka is best known for leading the team that created the original Sonic The Hedgehog. He’s moved on from the speedy blue hero since then, launching his own company based in Tokyo – Prope Games. Legend of Coin is the... | Read more »
Why doesn't mobile gaming have its...
The Overwatch League is a pretty big deal. It's an attempt to really push eSports into the mainstream, by turning them into, well, regular sports. But slightly less sweaty. It's a lavish affair with teams from all around the world, and more... | Read more »
Give Webzen’s new billiard game PoolTime...
Best known for producing hugely popular MMO titles, South Korean publisher Webzen is now taking aim at a different genre altogether. PoolTime is a realistic eight ball pool simulator, allowing you to compete in real-time matches against players... | Read more »

Price Scanner via MacPrices.net

9.7-inch 2017 WiFi iPads on sale starting at...
B&H Photo has 9.7″ 2017 WiFi #Apple #iPads on sale for $30 off MSRP for a limited time. Shipping is free, and pay sales tax in NY & NJ only: – 32GB iPad WiFi: $299, $30 off – 128GB iPad WiFi... Read more
Wednesday deal: 13″ MacBook Pros for $100-$15...
B&H Photo has 13″ #Apple #MacBook Pros on sale for up to $100-$150 off MSRP. Shipping is free, and B&H charges sales tax for NY & NJ residents only: – 13-inch 2.3GHz/128GB Space Gray... Read more
Apple now offering Certified Refurbished 2017...
Apple has Certified Refurbished 9.7″ WiFi iPads available for $50-$80 off the cost of new models. An Apple one-year warranty is included with each iPad, and shipping is free: – 9″ 32GB WiFi iPad: $... Read more
10″ iPad Pros on sale for $50-$75 off MSRP, n...
B&H Photo has 10″ and #Apple #iPad Pros on sale for up to $75 off MSRP. Shipping is free, and B&H charges sales tax in NY & NJ only. Note that some sale prices are restricted to certain... Read more
Apple refurbished Mac minis available startin...
Apple has restocked Certified Refurbished Mac minis starting at $419. Apple’s one-year warranty is included with each mini, and shipping is free: – 1.4GHz Mac mini: $419 $80 off MSRP – 2.6GHz Mac... Read more
Amazon offers Silver 13″ Apple MacBook Pros f...
Amazon has new Silver 2017 13″ #Apple #MacBook Pros on sale today for up to $150 off MSRP, each including free shipping: – 13″ 2.3GHz/128GB Silver MacBook Pro (MPXR2LL/A): $1199.99 $100 off MSRP – 13... Read more
Sale: 12″ 1.3GHz MacBooks on sale for $1499,...
B&H Photo has Space Gray and Rose Gold 12″ 1.3GHz #Apple MacBooks on sale for $100 off MSRP. Shipping is free, and B&H charges sales tax for NY & NJ residents only: – 12″ 1.3GHz Space... Read more
Apple offers Certified Refurbished 2017 iMacs...
Apple has a full line of Certified Refurbished iMacs available for up to $350 off original MSRP. Apple’s one-year warranty is standard, and shipping is free. The following models are available: – 27... Read more
13″ MacBook Airs on sale for $120-$100 off MS...
B&H Photo has 2017 13″ 128GB MacBook Airs on sale for $120 off MSRP. Shipping is free, and B&H charges sales tax for NY & NJ residents only: – 13″ 1.8GHz/128GB MacBook Air (MQD32LL/A): $... Read more
15″ Touch Bar MacBook Pros on sale for up to...
Adorama has Space Gray 15″ MacBook Pros on sale for $200 off MSRP. Shipping is free, and Adorama charges sales tax in NJ and NY only: – 15″ 2.8GHz MacBook Pro Space Gray (MPTR2LL/A): $2199, $200 off... Read more

Jobs Board

*Apple* Solutions Consultant - Apple (United...
# Apple Solutions Consultant Job Number: 113384559 Brandon, Florida, United States Posted: 10-Jan-2018 Weekly Hours: 40.00 **Job Summary** Are you passionate about Read more
Art Director, *Apple* Music + Beats1 Market...
# Art Director, Apple Music + Beats1 Marketing Design Job Number: 113258081 Santa Clara Valley, California, United States Posted: 05-Jan-2018 Weekly Hours: 40.00 Read more
*Apple* Pay & Wallet Engineering Manager...
# Apple Pay & Wallet Engineering Manager, Apple Watch Job Number: 83769531 Santa Clara Valley, California, United States Posted: 06-Nov-2017 Weekly Hours: 40.00 Read more
UI Tools and Automation Engineer, *Apple* M...
# UI Tools and Automation Engineer, Apple Media Products Job Number: 113136387 Santa Clara Valley, California, United States Posted: 11-Jan-2018 Weekly Hours: 40.00 Read more
Senior Product Architect, *Apple* Pay - App...
# Senior Product Architect, Apple Pay Job Number: 58046427 Santa Clara Valley, California, United States Posted: 04-Jan-2018 Weekly Hours: **Job Summary** Apple , Read more
All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.