TweetFollow Us on Twitter

Securing Mac OS X

Volume Number: 21 (2005)
Issue Number: 2
Column Tag: Security

Securing Mac OS X

by Paul Day

A guide to security hardening for Mac OS X


This article covers numerous methods to harden Apple's Mac OS X, from both a local user and network perspective. It is primarily aimed at the single-user Macintosh client machine owned and used by a security conscious user. Its methods can be equally applied to a multi-user machine; however there are numerous additional security risks presented the moment a Mac OS X machine is made multi-user.


Apple's MacOS has taken a dramatic change from its predecessors ("MacOS Classic"), introducing numerous parts of FreeBSD, NeXT and the Mach (Darwin) kernel into the MacOS environment.

"Keep others out - With Mac OS X, you may never need to worry about security again."

A default install of Mac OS X is one of the more secure Unix operating systems from a network-security point of view, with no network services open by default. However, there are still numerous drawbacks to its local and network security which can be addressed by the administrator of the machine.

Root Usage

By default, the root user account within Mac OS X has its password disabled. Throughout this paper, you are required to run a command "as root". The method of doing this is left up to the reader, but possibilities (in order of considered strength) include:

  • sudo <command> as a normal admin user.
  • sudo /bin/bash as a normal admin user and then running the commands.
  • Enabling the root account password, using su to start a shell as root and then running the commands.

Local Security

The following section covers numerous methods to harden security within Mac OS X from a local user perspective:

  • With local physical access to the machine via its console. With interactive local access to the machine via methods such as Secure Shell (SSH) or Apple Remote Desktop (ARD).

The Login Window

The following includes instructions to enable and lock down the GUI login window. By default, Mac OS X automatically logs in rather than forcing the user to authenticate at a login window.

Enabling and locking down the Login Window

To enable the GUI login window, disable password hints, access to shutdown/restart controls and automatic login you can edit the file /Library/Preferences/ as root or use the System Preferences Accounts pane as follows:

  • Apple menu -> System Preferences -> Accounts -> Login options -> Display Login Windows as -> Name and Password
  • Uncheck Automatically log in as:
  • Check Hide the Sleep, Restart and Shut Down buttons
  • Uncheck Enable fast users switching if not used

Securing Login Windows options

Fast user switching is handy on a multi-user machine, however on a single-user machine where it is never used, it is an unnecessary risk (eg, An Apple Remote Desktop root compromise used Fast User Switching).

To disable automatic login on a global basis:

  • Apple menu -> System Preferences -> Security
  • Check Disable automatic login

Disabling automatic login

To enable a text message to be displayed as part of the login window, you will need to edit the file /Library/Preferences/ as root. The file may look like:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" 
<plist version="1.0">
	<string>Authorized users only.</string>

Note the <string> line below the key LoginwindowText. Insert the text you would like to appear in the Login Window here and finish it with the </string>.

Changing passwords

It is good security practice to regularly change your password, especially as the login window does not presently make of mlock() or encrypted swap and a user with physical/root access to the machine could potentially get your login password from the swap files.

  • Apple Menu -> System Preferences -> Accounts
  • Select your username -> Select the Password field
  • If asked, type in your current password -> Type in a new password -> verify the new password


Mac OS X comes with a built-in screen-saver that includes password locking. This should be enabled to stop someone from using your computer when you step away from it.

To enable the screen-saver:

  • Apple menu -> System Preferences -> Desktop & Screensaver -> Screen Saver -> (Select a screen-saver)
  • Change Start screen saver to 3 minutes

To require a password to exit the screen saver:

  • Apple -> System Preferences -> Security
  • Check Require password to wake this computer from sleep or screen saver

Enabling password locking within screen saver

You may also wish to enable an active-corner to disable the screensaver for times you don't want it to come on after inactivity (e.g. while watching a movie) and, more importantly, to instantly load the screensaver:

  • Apple menu -> System Preferences -> Desktop & Screensaver -> Screen Saver -> Hot Corners
  • Choose a corner, e.g. bottom right -> Disable Screen Saver
  • Choose a corner, e.g. top right -> Start Screen Saver

Enabling a screen saver corner


Mac OS X includes a utility for caching commonly used passwords. It should be noted that there is always a risk with caching a password on disk in any form, regardless of the software used.

Keychain stores its passwords on disk in an encrypted form and it is difficult for a non-root user to sniff a password between applications. However, similar to the Login Window, it is possible to get hold of a user's Keychain password with root or physical access to a machine. The best practice is to remember your passwords without storing them.

There are a number of steps you can take to minimise your risk when using Keychain Access. To enable Keychain automatic locking:

  • Applications -> Utilities -> Keychain Access -> Edit -> Change settings for Keychain "login"
  • Check Lock after
  • Change minutes of inactivity to 5 minutes
  • Check Lock when sleeping
  • Save

Configure Keychain Access security settings

By default, Mac OS X makes your Keychain password the same as your login password. It is good practice to keep each password different:

  • Edit -> Change Password for Keychain "login"
  • Type in your current user's login password
  • Type in a new different password twice
  • OK

Changing your Keychain password


As is generally the case, you should keep your Mac OS X machine regularly patched with the latest software updates, which often include security fixes.

Apple Software Update

Mac OS X includes an automatic software update tool to patch the majority of Apple applications. Software Update often includes important security updates which should be applied to your machine. The tool automatically checks what updates are available and, with major upgrades, can download patches rather than full installations, to minimize the amount downloaded.

Software Update

It is best to configure Software Update to automatically check for updates on a frequent basis:

  • Apple Menu -> System Preferences -> Software Updates
  • Check Check for updates
  • Choose Daily from drop-down menu.

Software Update, automatically check for updates

Your machine will now check with Apple for software updates once a day and notify you when there are new ones ready for download.

Software update can also be run from the command line as root with:

/usr/sbin/softwareupdate -ia
and scheduled to run with:
/usr/sbin/softwareupdate -schedule on

Software update for Fink

If you are using the Fink packaging systems, you may also wish to have the following in root's daily crontab or in /etc/daily:

/sw/bin/fink -y selfupdate
/sw/bin/fink -y selfupdate-cvs
/sw/bin/fink -y update-all
/sw/bin/fink -y scanpackages
/sw/bin/fink -y index
/sw/bin/fink -y cleanup
/sw/bin/apt-get -y update
/sw/bin/apt-get -y install fink
/sw/bin/apt-get -y upgrade
/sw/bin/apt-get -y dist-upgrade
/sw/bin/apt-get -y clean
/sw/bin/apt-get -y autoclean
/sw/bin/apt-get -y check

Other updates

Many other major software packages include their own automatic software update utilities. These may be separate utilities such as Microsoft's AutoUpdate:

Microsoft AutoUpdate

Other packages, such as Omni's OmniGraffle, include automatic updating from within the software package itself:

OmniGraffle automatic software update

You are encouraged to use these tools whereever possible, however specifics are beyond the scope of this paper.

File Encrytion

There are number of major ways of encrypting files within Mac OS X. By far, the most secure method is to use GnuPG; however Apple's FileVault and disk images are much more convenient.

FileVault and encrypted volumes

Apple's FileVault is an implementation of its AES-encrypted volume images that automatically mount as your home directory as you login and decrypt/encrypt data on the fly. Encrypting data on your hard-drive is nothing new but MacOS 10.3 is the first Unix to integrate decryption and mounting seamlessly into the system. From the point-of-view of the user and applications, there is no encryption taking place, beyond a slight performance hit.

To enable FileVault:

  • Apple menu -> System Preferences -> Security
  • Turn on FileVault

Enabling FileVault

Depending on the amount of data in your home directory, it may take a while to convert it into a FileVault. It should be noted here that after encrypting your home directory, it is not securely deleted. It is simply unlinked and hence could be recovered.

You may also wish to set a master password for the computer. The master password should be different to your login (and hence FileVault) password and can be used to decrypt your FileVault in the case of password loss.

From a security point of view, keep in mind that due to a lack of mlock() in FileVault, an attacker with physical or root access can gain your FileVault password and access to your encrypted files.

Encrypted AES disk image

Apple's encrypted disk images don't offer the seamless mounting of FileVault, but do still encrypt on the fly as you write to them. To create an encrypted disk image:

  • Applications -> Utilities -> Disk Utility
  • New Image
  • Save as -> Choose a name for the file system and image file name
  • Where -> Choose a location to save the image file
  • Size -> Choose a maximum size to allow the image to grow to
  • Encryption -> Choose AES-128
  • Format -> Sparse Disk Image
  • Create -> Enter and Verify password
  • Check or uncheck Remember password (add to Keychain)

Creating an encrypted sparse image

It is no less secure to save a disk image's password in the Keychain as Apple's SecurityAgent (the program that takes the password from the user) suffers from the same vulnerability as Keychain itself.

Once you have created the disk image, you can mount it by double-clicking on it in Finder. It will then mount as /Volumes/<image file system name> and an icon will appear on your desktop.

Openssl encrypted files

Another alternative is using openssl and a password to encrypt a file. Openssl does not employ asymmetric keys (i.e. a private and public key) and allows you to just assign a single password to the encrypted file. However, openssl under Mac OS X may suffer a similar vulnerability to FileVault.

To encrypt a file using openssl and the (128bit) blowfish encryption algorithm:

openssl bf -salt -in <plain file> -out <encrypted file> 

Then securely remove the original file:

srm -fm <input file>

Finally, decrypt the file back:

openssl bf -d -in <encrypted file> -out <plain file>
A script to encrypt an entire directory could be:
# Script to encrypt a dir and securely remove it.

if [ $# -lt 1 ] ; then
	echo "Usage: $0 dir_to_encrypt"
	exit 1

file=`echo $1 | sed s/"\/"//g | sed s/"\."//g`

echo -n "Checking if $dir actually exists... "
if [ -d $dir ] ; then
	echo "Yes."
	echo "No. Exiting."
	exit 1

echo -n "Checking to make sure $ doesn't already exist... "
if [ -e $ ] ; then
	# exists
	echo "Yes. Exiting."
	exit 1
	# doesn't exist
	echo "No." 

echo -n "Checking to make sure tempfile doesn't already exist... "
if [ -e temp.tar.gz ] ; then
	echo "Yes. Exiting. You need to remove temp.tar.gz."
	exit 1
	echo "No."
echo "Tarring up directory..."
tar -zcvf temp.tar.gz $dir 
echo "Done."
echo "Encrypting directory..."
openssl bf -salt -in temp.tar.gz -out $
echo "Done."
echo "Here is what the encrypted archive looks like:"
ls -l $
echo "Is it safe to securely remove $dir? (y)/n"
read remove
if [ x$remove = xn ] || [ x$remove = xN ]; then
	echo "Ok, exiting without removing it."
	srm -fm temp.tar.gz
	exit 0
	echo "Ok, removing $dir securely and exiting..."
	srm -rfm $dir
	srm -fm temp.tar.gz
	echo "Done"

Finally, a matching script to decrypt the archive back to a directory in the current working directory:

# Script to decrypt a archive

if [ $# -lt 1 ] ; then
	echo "Usage: $0 archive_to_decrypt"
	exit 1

dir=`echo $1 | cut -d "." -f 1`
echo -n "Checking if $file actually exists... "
if [ -f $file ] ; then
	echo "Yes."
	echo "No. Exiting."
	exit 1
echo -n "Checking to make sure $dir doesn't already exist... "
if [ -f $dir ] ; then
	# exists
	echo "Yes. Exiting."
	exit 1
	# doesn't exist
	echo "No." 
echo -n "Checking to make sure tempfile doesn't already exist... "
if [ -e temp.tar.gz ] ; then
	echo "Yes. Exiting. You need to remove temp.tar.gz."
	exit 1
	echo "No."
echo "Decrypting..."
openssl bf -salt -d -in $file -out temp.tar.gz
echo "Untarring..."
tar -zxvf temp.tar.gz
echo "Cleaning up..."
rm temp.tar.gz
echo "All done."

GnuPG encrypted files

Gnu Privacy Guard (an open source version of PGP) allows you to encrypt a file using a public key. You would then be able to decrypt the file at a later date using the private key and the key's passphrase.

Unlike FileVault, GnuPG makes use of mlock() and hence doesn't suffer from the same vulnerability. However, it has had a number of its own security concerns.

This section assumes you have already managed to install GnuPG and have created yourself a public/private key-pair. Numerous resources to help you can be found on the web. To then encrypt a file, you would use:

gpg -r <your key's name> --encrypt-files <filename> 

This will create the file filename.gpg. You should securely remove the original plain-text with:

srm -fm <filename>

Apple's srm is included with OS 10.3 (some users may prefer using the GNU fileutils rm). Similar to the GUN utility shred, srm over-writes the file 7 times with random data before unlinking it from the file-system.

To then decrypt the encrypted file:

gpg -r <your key's name> --decrypt-files <filename.gpg > filename

gpg can also be used with just a symmetric cipher and a single password by using the -c switch.

The two scripts in the section REF _Ref87526463 \p \h \* MERGEFORMAT above cover en/decrypting entire directories and could be easily modified to use gpg instead of openssl.

Configuring Open Firmware Password

Configuring an Open Firmware (OF) password on your Mac will disable any boot keys when your machine is booting. This means a user with physical access to the machine is unable to boot the machine into target-disk mode, from CD-ROM or into single-user mode.

The simplest way to set an OF password is to use Apple's utility, which can be found at OS X/apple/openfirmwarepassword.html.

The utility asks for your user password so that it can run sudo nvram to set the OF password and then asks for a password to set as the OpenFirmware password:

Setting an OpenFirmware password

To set the password yourself directly from OpenFirmware:

<enter your password>
setenv security-mode command

You may wish to remove the OpenFirmware password when you are unable to boot the machine properly and need to re-install, back data up using target mode or boot using single-user.

To do this, remove it directly from OpenFirmware:

<enter password>
setenv security-mode=none

In an emergency, the OpenFirmware password can also be removed by changing the amount of RAM and then resetting the PRAM three times (press and hold option-apple-p-r while powering up until you hear the machine reboot three times). This is obviously also a potential security risk and for this reason, your machine should be physically secured.

You should also be aware that anyone with root/sudo access to the machine can easily get the OpenFirmware password. Like Sun's OpenBoot, OpenFirmware is unagble to hash the password before placing into non-volatile memory. The hex code of the ASCII password can be revealed with, as root:

nvram security-password

You can then convert the output back to ASCII to get the current OpenFirmware password.

Disabling Fiewire Direct Memory Access

By default, the FireWire protocol gives the FireWire device access to the host's physical memory. This could potentially be used to suck the entire memory contents out of the machine (including your passwords and current working data). Alternatively, an attacker could determine where in memory the screensaver is and insert some random bytes to crash the screensaver, gaining access to the machine.

An undocumented side-affect of enabling an Open Firmware password (see section above) is that it indirectly disables physical memory access for FireWire devices through the IOFireWireFamily kernel driver.

Disabling FireWire DMA appears to have little affect on the performance of FireWire.

Disabling Single-user Logins

A default installation, without an OpenBoot password (or with a subverted OpenBoot password), can be booted into a single-user shell by holding down the "S" key during power-up (or boot disk -s from within OpenBoot). This could be used by an attacker with physical access to read your data, add extra accounts or change your passwords.

The following section introduces a method of ensuring a user must enter a password before being presented with a root-user shell as part of a single-user login. As root:

vi /etc/ttys

To generate a password for root to use when logging into a single-user booted system we use openssl:

openssl passwd -salt <xy> <password>

Replace <xy> with two random letters to act as salt for the hashing and <password> with the password you want to use for the single-user login. This is completely separate from the local root password, which, if it exists, is stored in the NetInfo database by default.

Now copy the hash that was returned by openssl into your paste buffer, open the file /etc/master.passwd in vi (or your favourite editor) and replace the asterisk (*) next to "root:" with the hash so the file looks something like:

nobody:*:-2:-2::0:0:Unprivileged User:/var/empty:/usr/bin/false
root:8d4Gfm/Dhzw6Q:0:0::0:0:System Administrator:/var/root:/bin/sh

Write the file to disk (with :wq) and exit vi. You will now be asked for the password when booting into single-user.

Disable Safari Auto-open

Safari, Apple's web-browser, includes a feature where it will automatically launch a number of different file types with their associated application. This could potentially pose a risk with the user unwittingly opening a file without realising it.

To disable the feature:

  • Safari -> Preferences... -> General
  • Uncheck Open 'safe' files after downloading

Disabling Safari auto-open

Removing Other Local Users

There are other vulnerabilities within Apple's Mac OS X 10.3.6 that have not yet been publicly disclosed and hence won't be discussed in this article. However, it should be noted (although probably obvious) that to ensure the security of your Mac OS X machine, you should avoiding allowing any other local users access to your machine, whether by Fast User Switching or SSH.

Removing normal local users

The cleanest and easiest way to remove extra users is by using the Accounts System Preferences pane:

  • Apple menu -> System Preferences -> Accounts
  • Select the other account
  • Click the minus (-) button -> Delete Immediately

Using the Accounts preferences pane to remove extra users

Checking system user accounts

You may also wish to ensure that no other accounts (not shown in the Accounts preferences pane) have been added by an application installation and left with insecure/default passwords. These could be exploited by an attacker allowing them login to your machine.

To do this you need to make changes within the NetInfo database, either via the GUI or the command line. To remove passwords on extra system accounts using the GUI:

  • Applications -> Utilities -> NetInfo Manager -> Domain -> Open -> / -> OK -> / -> users
  • Choose a system user -> Ensure it has no passwd entry
  • If it does have a password entry, click the lock in the bottom left -> authenticate -> select the passwd line -> Delete
  • Close the window -> Save -> Update this copy

Checking for active users in NetInfo Manager

Fix File Permissions

Over time, permissions and ownership of numerous files may become insecure. This is generally caused by installation of packages put together by non-security-savvy software developers.

To try to correct this situation, it is a good idea to regularly use Apple's Disk Utility to fix file permissions. This can be done by:

  • Applications -> Utilities -> Disk Utility
  • Select your / disk-partition
  • First Aid -> Repair Disk Permissions

Repairing file permissions

It can also be done from the command line as root:

/usr/sbin/diskutil repairPermissions / 

The output may look like:

Started verify/repair permissions on disk disk0s3 local
Determining correct file permissions.
We are using special permissions for the file or directory .
   /System/Library/Filesystems/cd9660.fs/cd9660.util.  New permissions are 33261
Permissions differ on ./private/var/log/install.log, 
   should be -rw-r--r-- , they are -rw-r----- 
Owner and group corrected on ./private/var/log/install.log
Permissions corrected on ./private/var/log/install.log
Permissions differ on ./private/var/log/wtmp, 
   should be -rw-r--r-- , they are -rw-r----- 
Owner and group corrected on ./private/var/log/wtmp
Permissions corrected on ./private/var/log/wtmp
The privileges have been verified or repaired on the selected volume
Verify/repair finished permissions on disk disk0s3 local
You may choose to add this to root's or the 
   system cron files, e.g. /etc/weekly.local.

diskutil is unable to automatically correct all insecure/incorrect permissions for you. To list all files with potentially insecure or strange permissions, run the following commands as root and examine (or redirect) the output:

To list all setuid/gid (binaries that run with a user or group ID of someone other than the user running then, commonly root) files:

find / -type f \( -perm -4000 -o -perm -2000 \) \-exec ls -al {} \; 2>/dev/null 

To list all world writable files:

find / -type f \( -perm -2 \) \-exec ls -al {} \; 2>/dev/null

To list all world writable directories:

find / -type d \( -perm -2 \) \-exec ls -ald {} \; 2>/dev/null 

To list all un-owned files:

find / -nouser -o -nogroup \-exec ls -al {} \; 2>/dev/null

Based on the output of these commands, you may choose to change or remove permissions to some files manually. Make sure you are fully aware of the purpose of a file before fiddling with its permissions. Random permission changes may result in an unusable system!

Removing Classic

Some users may have chosen to install Mac OS Classic support. Classic provides Mac OS 9 emulation support within Mac OS X, which allows a user to seamlessly run an old Mac OS application on their new Mac OS X machine.

If you're not actually using any Classic applications, it is best to disable and remove Classic support entirely. Run the following commands as root:

rm -rf /System/Library/PreferencePanes/Classic.prefPane/
rm -rf '/System/Library/Classic/'
rm -rf '/System/Library/CoreServices/Classic'
rm -rf '/System/Library/UserTemplate/English.lproj/Desktop/ Desktop (Mac OS 9)/'
rm -rf '/System Folder/'
rm -rf '/Mac OS 9 Files/'
rm -rf '/Applications (Mac OS 9)'

Securing Bluetooth

Bluetooth is a radio (2.4GHz) data technology that allows a user to wirelessly connect numerous personal devices to allow communication between them. Bluetooth achieves what is sometimes referred to as a Personal Area Network (PAN), allowing you to, for example, have your mobile phone, hands-free kit, PDA and computer all communicating wirelessly.

Unfortunately, Bluetooth has numerous security drawbacks. This section discusses a number of methods to help lock down Bluetooth on your Mac OS X machine. The methods can also be applied to your other, non-Mac OS X, Bluetooth devices (eg, PDA, mobile phone).

Turn it off

If you're not actively using the Bluetooth connection, you should disable it:

  • Apple menu -> System Preferences -> Bluetooth -> Settings
  • Turn Bluetooth Off

Disabling Bluetooth

Put the device in hidden/invisible mode

Your devices only need to be in "visible" or "discoverable" mode when pairing them with your other Bluetooth devices. Once you have paired devices, you should disable visibility. Paired devices are still able to communicate even when not in discoverable mode.

To make your Mac invisible:

  • Apple menu -> System Preferences -> Bluetooth -> Settings
  • Uncheck Discoverable

Note that invisible/non-discoverable mode does not make your device entirely invisible. It simply makes it harder to find.

Turn on authentication

Once Bluetooth authentication is on, devices generally need to then use a common password to pair with another device, although there are vulnerabilities in some vendor's implementation. To turn on password authentication:

  • Apple menu -> System Preferences -> Bluetooth -> Settings
  • Check Require Authentication

Turn on encryption

Turning on Bluetooth encryption means that the majority of data transmitted between Bluetooth devices is encrypted with a common key. This makes it difficult for a third party to sniff the data or use recorded data in "replay attacks". To turn on Bluetooth encryption:

  • Apple menu -> System Preferences -> Bluetooth -> Settings
  • Check Require Authentication -> check Use Encryption

Do not allow auto-acceptance of files

It is best to always be asked for confirmation when accepting a file, stopping a dangerous file or Trojan to be automatically uploaded. To do this:

  • Apple menu -> System Preferences -> Bluetooth -> File Exchange
  • When receiving items: -> Choose Prompt for each file
  • When PIM items are accepted and When other items are accepted: -> Choose Ask

If you never use Bluetooth to push files from another device to your Mac, set it to automatically Refuse all.

Disable file shares

If you do not actively share files from the Mac to your other Bluetooth devices, disable all sharing (read-only and read/write) of files:

  • Apple menu -> System Preferences -> Bluetooth -> File Exchange
  • Uncheck Allow other devices to browse files on this computer

Disabling Bluetooth file sharing

Do not pair with unknown devices

To alleviate the chances of an attacker pairing with your machine, do not pair with an unknown device or allow physical access to your machine to any un-trusted party.

Network Security

The following section describes methods of securing Mac OS X from an external, or network, perspective.

Disabling Services

By default, Mac OS X does not come with any network services enabled. However, some services may have been enabled unwittingly or by installing extra software. This section describes methods of ensuring unknown services are disabled.


Apple's Sharing preference pane is a front-end to xinetd and SystemStarter. It is used to enable and disable a number of common Internet services such as SSH (Remote Login) and the Apache web-server (Personal Web Sharing).

By default, Mac OS X 10.3 comes with all the Sharing network services turned off. However, some users may have enabled services unnecessarily.

The Sharing preferences pane

To disable all services:

  • Apple menu -> System Preferences -> Sharing
  • Uncheck any checked service

A very basic description of each service can be read by selecting the service and reading the description provided below the Start/Stop button.

The following table shows the Apple service name, normal Internet service name, and software associated with providing the service:

Apple ServiceInternet ServiceSoftware
Personal File SharingAFP(overTCP)AppleFileServer
Windows SharingSMB/CIFSSamba
Personal Web SharingHTTPApache
Remote LoginSSHOpenSSH
FTP accessFTPtnftpd
Apple Remote DesktopARDARD Helper
Remote Apple EventsEPPCAEServer
Printer SharingLPR/printerCUPS

Table showing hostconfig entries and descriptions

If you must have remote access to your Mac, SSH ("Remote Login") is considered to be one of the more secure methods. SSH can also be used for file transfer by using SCP (Secure Copy) and SFTP (Secure FTP). You can also use it for securely tunnelling other services, for example ARD or VNC. See below for instructions on restricting to particular IPs (either through xinetd or ipfw) and securing the default sshd settings.


Mac OS X uses the xinetd Internet Super Server for providing a number of IP-based services. Some are enabled/disabled through the Sharing preferences pane while many others (including what are commonly referred to as "useless Unix services") aren't. A list of all services it can provide (from a default installation) can be found in /etc/xinetd/.

A listing of any services that have been enabled (either through the Sharing preferences pane or otherwise) can be found by:

grep disable /etc/xinetd.d/* | grep no

Any services that are not required should be disabled. This can be done by editting the file revealed by the command above and changing the line disable = no to disable = yes. For example, your ssh file may look like:

service ssh
	disable = yes
	socket_type = stream
	wait = no
	user = root
	server = /usr/libexec/sshd-keygen-wrapper
	server_args = -i
	groups = yes
	flags = REUSE IPv6
	session_create = yes

Once all unnecessary services have been disabled, you can restart xinetd with:

kill -HUP `cat /var/run/`

If you have disabled every service and want to kill off xinetd entirely:

kill `cat /var/run/`

If you're choosing to leave a service enabled, you can either restrict what IPs can connect to it within xinetd, or within the ipfw firewall software (see section below). If you decide to restrict it within xinetd, you have the choice of either "allow some, deny rest" or "deny some, allow rest".

As the final line (i.e. above the closing }) within the xinetd configuration file for the service you're restricting, add in your specifications. To "allow some, deny the rest":

only_from = <ip or subnet>, <ip or subnet>, <ip or subnet>
Or to "deny some, allow the rest":
   no_access = <ip or subnet>, <ip or subnet>

Insecure services can also be tunnelled with encryption using SSH. Doing so, you leave the service firewalled to the outside world and tunnel a connection into the machine using SSH. OpenSSH itself also has specific user access controls on top of xinetd's and a firewall. See the section below for specifics on securely using SSH.

OSX hostconfig Services

Mac OS X uses a service start-up system called SystemStarter, which replaces the init scripts most people would be familiar with from Unix System V variants. It does include a number of features not available in init, such as including dependencies in the service, rather than relying on manual ordering within a certain run-level.

A number of SystemStarter scripts source the /etc/hostconfig file to see if they should start or not. This file contains variables we can set to quickly enable/disable services at boot time.

The following table lists items you may find in /etc/hostconfig and a short description of what they're used for:

AFPSERVERApple File Serving, over TCP for "Personal File Sharing"
AUTHSERVERApple NetInfo Authentication service
AUTOMOUNTAutomatic mounting of NFS mount-points (not to be confused with amd)
CUPSLocal printing services
IPFORWARDINGIP routing for other clients
IPV6IP version 6 protocol support
MAILSERVERThe postfix SMTP mail server
NETINFOSERVERBind to a NetInfo server for directory and authentication access
NFSLOCKSNetwork File System file locking support
NISDOMAINBind to a NIS domain server for authentication
RPCSERVERRemote Procedure Call support for numerous Unix services, such as NFS
TIMESYNCRun NTPd to maintain constant time synchronisation
QTSSERVERApple QuickTime Streaming Server modules
WEBSERVERThe Apache web-server for "Personal Web Sharing"
SMBSERVERWindows file sharing using Samba
COREDUMPSWrites a core dump to disk in the case of a kernel panic
VPNSERVERApple's VPN service daemon (LT2P and PPTP)
CRASHREPORTERApple's crash logging service
XGRIDSERVERAct as a server for Apple's grid computing software, xgrid
XGRIDAGENTAct as a client for Apple's grid computing software, xgrid
ARDAGENTApple Remote Desktop server

Table showing hostconfig entries and descriptions

Suggested services to enable include CUPS (with -YES-) to allow printing and NETINFOSERVER (with =-AUTOMATIC-), which will load netinfod on a stand-alone machine for authentication.

You can enable ntpd for consistent time synchronisation for meaningful logs if you wish. If you choose to disable it, you may wish to add the ntpdate command to /etc/daily or root's crontab:

/usr/sbin/ntpdate -p 8 -u 

Change "" to a local NTP server closer to your location.

Other OSX Services

Finally, some SystemStarter and mach_init.d scripts don't actually refer to an entry in /etc/hostconfig to see if they should be run or not. These scripts require manual examination.

SystermStarter and mach_init store their scripts in three locations: /Library/StartupItems/, /System/Library/StartupItems and /etc/mach_init.d.

An example service that starts from StartupItems without examining a /etc/hostconfig entry is the NFS server, nfsiod, starting from /System/Library/StartupItems/NFS/NFS. To de-activate it, as root you would edit the script and comment out the line that starts nfsiod:

   # nfsiod is the NFS asynchronous block I/O daemon, which implements # NFS
read-ahead and write-behind caching on NFS clients. #nfsiod -n 4 

Apple's auto-mount daemon (ADM - not to be confused with the NFS automount service) is used for automatically mounting CDs and image files. It can be disabled in /System/Libraries/StartupItems/AMD/AMD. It also checks /etc/hostconfig for a AMDSERVER:=-NO-, which can be inserted manually (it isn't included in /etc/hostconfig by default).

A default system is unlikely to have any further items that aren't controlled by /etc/hostconfig. However, third-party applications you have installed may. You may wish to examine the contents of each /System/Library/StartupItems/*/* and /etc/mach_init.d/* file to determine what services start automatically.

Finally, you can check for any services left running by using, as root:

/usr/sbin/lsof | grep LISTEN

Disabling Directory Access Methods

By default, Mac OS X comes with a number of directory access methods enabled, which could be open to exploitation (e.g. the LDAPv3 service accepts an LDAP server from DHCP by default, which could be faked by a rogue DHCP server on the LAN).

For a stand-alone Mac OS X client, the majority of (or potentially all) services are not required. The following is a table of each of the Directory Access methods and a description of its use:

Directory Access methodUse
Active DirectoryWindows 2000 domain file sharing and authentication
AppleTalkApples legacy protocol for discovering file and print services
BSD Flat File and NIS/etc flat files and Unix Network Information Service (NIS) or Yellow Pages (yp) directory and authentication
LDAPv3LDAP directory access and authentication
NetInfoApple's directory access and authentication
RendezvousApple multicast protocol for file, print, chat, music and other network services
SLPService Location Protocol - open standard file and print server discovery
SMBWindows workgroup file and print sharing/serving

Table showing Directory Access methods and their use.

To disable services you don't require:

  • Applications -> Utilities -> Directory Access
  • Uncheck unrequired services

Configuring Directory Access

If you need to use LDAP for directory services (such as an enterprise LDAP email address book), ensure you have disabled the DHCP-supplied LDAP Server option:

  • Applications -> Utilities -> Directory Access -> LDAPv3 -> Configure
  • Uncheck Use DHCP-supplied LDAP Server

Disabling DHCP-supplied LDAP Server

Configuring A Firewall

By default, Mac OS X does not come with its built-in firewalling software, ipfw, enabled. The following section shows how best to enable a firewall on your machine.

Mac OS X's built-in firewall configuration

Mac OS X includes a method for enabling a default set of firewall rules within the Sharing preferences pane:

  • Apple menu -> System Preferences -> Sharing -> Firewall -> Start

Enabling ipfw through System Preferences

By default, the firewall Sharing install isn't is relatively mediocre from a security point of view, but much better than no firewall at all. The following is a list of the rules it adds:

02000 allow ip from any to any via lo*
02010 deny ip from to any in
02020 deny ip from any to in
02030 deny ip from to any in
02040 deny tcp from any to in
02050 allow tcp from any to any out
02060 allow tcp from any to any established
12190 deny tcp from any to any
65535 allow ip from any to any

If you have enabled services, they will automatically be allowed through the firewall from 0/0 (everyone). If you have installed a third-party service, you may need to manually add it firewall:

  • New -> Port Name -> Other
  • Port Number, Range or Series: -> Type in the port number/s or range of ports the application needs inbound access for
  • Description: -> Type in the name of the service

Adding an extra service to the firewall

A number of manually-installed services are already listed in the New window under the Port Name menu.

Manual firewall configuration

The following section discusses designing and implementing a manual firewall script using ipfw.

As root, create the a SystemStarter directory and open its parameter's list in your favorite editor:

mkdir /Library/StartupItems/firewall
vi /Library/StartupItems/firewall/StartupParameters.plist
Insert the following into StartupParameters.plist:
	Description = "firewall";
	OrderPreference = "None";
	Provides = ("firewall");
	Requires = ("Network");
	Messages =
		start = "Starting firewall";
		stop = "Stopping firewall";

Next, edit /System/Library/StartupItems/IPServices/StartupParameters.plist and insert the following between Provides and Uses:

Requires = ("firewall");
So that it reads:
	Description = "Internet services";
	Provides = ("Super Server", "Config Server");
	Requires =("firewall");
	Uses = ("mDNSResponder", "Portmap", "NetworkExtensions");
	OrderPreference = "None";

This creates a dependency and ensures the firewall has been configured before any network services you've left enabled are loaded. This ensures none of the services are loaded with no protection between them and the outside world.

Finally, open up /Library/StartupItems/firewall/firewall in your editor and, at a minimum, insert the following rule-set. You may wish to add extra rules in the appropriate section from the example rules below this section.


## Declare variables
# Path to firewalling software

## Flush any existing rules from the firewall
$FW -q flush

## Outgoing

# Drop MS VPC7 license checking going out 
$FW add deny udp from any to any 21790
# Drop MS Office license checking going out
$FW add deny udp from any to any 2222
# Allow pretty much anything else out
$FW add allow all from any to any out

## Incoming

# Allow all from/to local loopback interface
$FW add allow all from any to any via lo0
# Then deny anything pretending to come from 127 on other ifs
$FW add deny log all from to any in

# Allow relevant outgoing connections back in
# Allow half open TCP back in (although not active ftp)
$FW add allow tcp from any to any established in
# Allow related UDP back in
# DNS - UDP/53
$FW add allow udp from any 53 to any 1024-65535 in
# NTP - UDP/123
$FW add allow udp from any 123 to any 123 in
$FW add allow udp from any 123 to any 1024-65535 in
# DHCP - UDP/67
# DHCP request to server back in to client
$FW add allow udp from any 67 to any 1024-65535 in
# DHCP offer from server in to client
$FW add allow udp from any to any 68 in
# Allow the neccesary ICMP in
# (echo reply, dest unreachable, ttl exceeded, IP header bad)
$FW add allow icmp from any to any icmptypes 0,3,11,12

### Insert your custom rules here

# Reject IDENT/AUTH with an ICMP reply
$FW add reject tcp from any to any 113 in

# Deny (drop without ICMP) the rest and log to /var/log/system.log
$FW add deny log all from any to any


Some rules you may wish to insert could include the following:

# Windows/SMB/Samba client access
$FW add allow udp from any 137-139 to any in
$FW add allow udp from any 445 to any in
$FW add allow tcp from any 137-139 to any in
$FW add allow tcp from any 445 to any in

# PPTP VPN client access
# (replace  with your VPN server's IP)
$FW add allow 47 from  to any in

# H.323 client access (NetMeeting and similar)
$FW add allow udp from 0/0 to 0/0 1720 in
$FW add allow tcp from 0/0 to 0/0 1720 in
$FW add allow tcp from 0/0 to 0/0 30000-30010 in
$FW add allow udp from 0/0 to 0/0 5000-5099 in

# XWindows client in an XNest running in display :1
# (replace  with the Unix box's IP)
$FW add allow tcp from  to any 6001 in

# XDMCP client in an XNest running in display :2
# (replace  with the Unix box's IP)
$FW add allow tcp from  to any 6002 in
$FW add allow udp from  177 to any in

# SSH server
$FW add allow tcp from 0/0 to any 22 in

To determine what TCP or UDP port a service uses (so that you can let incoming requests through your firewall), you can check the /etc/services file:

grep -i  /etc/services

Monitoring ipfw

The final rule in the above script tells ipfw to log any packets hitting the final deny rule before silently dropping them. As root, you can see which packets are being dropped with a command like:

/usr/bin/tail -f /var/log/system.log | grep ipfw

Kernel Twaeking

The following section describes a number of kernel variables that should be set to ensure the most secure network settings. Insert the following into /etc/sysctl.conf to ensure they're at their most secure:

# Verbose firewall logging
# ICMP limit
# Stop redirects
# Stop source routing
# Stop broadcast ECHO response
# Stop other broadcast probes
# TCP delayed ack off
# Turn off forwarding/routing
# Turn on strong/randomized TCP sequencing

They can also be manually entered at the command line (or in another script) at any time with the following syntax as root:

/usr/sbin/sysctl -w =

Securing SSH

SSH (Secure Shell), is provided under Mac OS X using the open-source package OpenSSH. It can be used for a secure remote interactive shell (SSH), secure file transfer (SFTP), secure copy (scp), secure X-windows forwarding (X11Forwarding) and encrypted tunnelling of other IP services.

General SSHd changes

SSHd is highly configurable and can be further locked down from it default settings. Its server configuration file can be found under Mac OS X as /etc/sshd_config and the following changes from the default configuration are recommended:

#Protocol 2,1
Protocol 2

#PermitRootLogin yes
PermitRootLogin no

Subsystem sftp /usr/libexec/sftp-server"
#Subsystem sftp /usr/libexec/sftp-server

Using SSH keys for authentication

It is considered more secure to login with an SSH key pair than a password. A machine that has already been hacked may have a trojanned sshd binary or authentication services which may be able to give a copy of your password to the attacker. If you have the same password on multiple machines (which is obviously not recommended) they may then login to those other machines using your credentials.

On the other hand, logging in with an SSH key does not allow an attacker to gain your password, even if you are using the same SSH key (with same passphrase) to login to other machines. To disable password authentication:

#PasswordAuthentication yes -> PasswordAuthentication no

To generate an SSH key pair on your external machine (assuming it runs OpenSSH):

user@host:~$ ssh-keygen -b 4096 -t dsa -C "Key for user@host Nov 2004"

Generating public/private rsa key pair.
Enter file in which to save the key (/Users/user/.ssh/id_rsa): 
Enter passphrase (empty for no passphrase): 
Enter same passphrase again: 
Your identification has been saved in /Users/user/.ssh/id_dsa.
Your public key has been saved in /Users/user/.ssh/
The key fingerprint is:
f3:99:d7:05:be:7f:41:42:64:97:b1:e7:d1:41:c9:08 Key for user@host Nov 2004

DSA is considerably faster than RSA for key generation and signing, however some argue that DSS has some potential security flaws in its signing process on machines with low random number entropy.

Ensure you add a pass-phrase to your key to protect it if the remote machine is compromised.

Now put ~/.ssh/ from the remote machine into ~/.ssh/authorized_keys on your Mac. Your key will now be automatically used instead of a password for SSH, SCP and SFTP remote access to your machine.

Forwarding X11 through SSH

Finally, if you have X11 programs that you want to export back to a remote machine, it is recommended that you use SSH's in-built X11 Forwarding in /etc/sshd_config:

#X11Forwarding no
X11Forwarding yes
From the client machine, you setup the SSH tunnel by typing:

ssh -X -l username <remote Mac>

Tunnelling other IP services through SSH

SSH can also be used to tunnel an otherwise insecure protocol through it.

For example, you may wish to use a VNC server running on the Mac OS X machine. VNC by itself is not encrypted and it's password is sent plain-text over the network. A somewhat more secure solution to this problem is to leave the SSH port firewalled, tunnel a VNC connection through to the machine and connect to the VNC port on it's loop-back interface.

For example, to make a tunnel through to the remote Mac's TCP port 5900 (commonly VNC), you would do:

ssh -N -L 5900: <remote Mac>

This command binds SSH to port 5900 on the localhost and tunnels it, via SSH, to port 5900 on the remote Mac. You would now point your VNC client to (ie, the localhost's loopback interface) on port 5900 and it will securely connect to the VNC server on your remote Mac.

Restarting sshd after config changes

Because Mac OS X spawns sshd from xinetd rather than as a stand-alone server, there is no need to restart anything. Changes you make to sshd_config are read in on the next connection to that service.


With the move from Mac OS Classic's roots to a Unix-based operating system, Apple's Mac OS has undergone massive changes.

While it is one of the more secure Unix operating environments by default, there are a number of methods the administrator of the machine can make use of to harden the environment further.

This article has outlined a number of these methods to secure Mac OS X from a local and network perspective.


  • de Vries, Stephen. "A Corsaire White Paper: Securing Mac OS X", Corsaire, 22 June 2004
  • Systems and network Attack Centre (SNAC ), National Security Agency (NSA). "Apple Mac OS X v10.3.x "Panther" - Security Configuration Guide", 2004
  • Beale, Jay, JJB Security Consulting, LLC and GWU Cyber Security Policy & Research Institute. "Locking Down Mac OS X" Delivered at Black Hat USA, 2003.

Paul Day is a Security Administrator who currently works for the University of Western Australia. He primarily deals with security policy and the administration of security in Cisco, Solaris, Linux and OS X based environments. His passions revolve around Unix & network security and optimization.


Community Search:
MacTech Search:

Software Updates via MacUpdate

Microsoft Office 2016 16.11 - Popular pr...
Microsoft Office 2016 - Unmistakably Office, designed for Mac. The new versions of Word, Excel, PowerPoint, Outlook, and OneNote provide the best of both worlds for Mac users - the familiar Office... Read more
Adobe Photoshop CC 2018 19.1.2 - Profess...
Photoshop CC 2018 is available as part of Adobe Creative Cloud for as little as $19.99/month (or $9.99/month if you're a previous Photoshop customer). Adobe Photoshop CC 2018, the industry standard... Read more
Adobe Dreamweaver CC 2018 -...
Dreamweaver CC 2018 is available as part of Adobe Creative Cloud for as little as $19.99/month (or $9.99/month if you're a previous Dreamweaver customer). Adobe Dreamweaver CC 2018 allows you to... Read more
Adobe Flash Player - Plug-in...
Adobe Flash Player is a cross-platform, browser-based application runtime that provides uncompromised viewing of expressive applications, content, and videos across browsers and operating systems.... Read more
Drive Genius 5.2.0 - $79.00
Drive Genius features a comprehensive Malware Scan. Automate your malware protection. Protect your investment from any threat. The Malware Scan is part of the automated DrivePulse utility. DrivePulse... Read more
MegaSeg 6.0.6 - Professional DJ and radi...
MegaSeg is a complete solution for pro audio/video DJ mixing, radio automation, and music scheduling with rock-solid performance and an easy-to-use design. Mix with visual waveforms and Magic... Read more
ffWorks 1.0.7 - Convert multimedia files...
ffWorks (was iFFmpeg), focused on simplicity, brings a fresh approach to the use of FFmpeg, allowing you to create ultra-high-quality movies without the need to write a single line of code on the... Read more
Dash 4.1.5 - Instant search and offline...
Dash is an API documentation browser and code snippet manager. Dash helps you store snippets of code, as well as instantly search and browse documentation for almost any API you might use (for a full... Read more
Evernote 7.0.3 - Create searchable notes...
Evernote allows you to easily capture information in any environment using whatever device or platform you find most convenient, and makes this information accessible and searchable at anytime, from... Read more
jAlbum Pro 15.3 - Organize your digital...
jAlbum Pro has all the features you love in jAlbum, but comes with a commercial license. You can create gorgeous custom photo galleries for the Web without writing a line of code! Beginner-friendly... Read more

Latest Forum Discussions

See All

Around the Empire: What have you missed...
Oh hi nice reader, and thanks for popping in to check out our weekly round-up of all the stuff that you might have missed across the Steel Media network. Yeah, that's right, it's a big ol' network. Obviously 148Apps is the best, but there are some... | Read more »
All the best games on sale for iPhone an...
It might not have been the greatest week for new releases on the App Store, but don't let that get you down, because there are some truly incredible games on sale for iPhone and iPad right now. Seriously, you could buy anything on this list and I... | Read more »
Everything You Need to Know About The Fo...
In just over a week, Epic Games has made a flurry of announcements. First, they revealed that Fortnite—their ultra-popular PUBG competitor—is coming to mobile. This was followed by brief sign-up period for interested beta testers before sending out... | Read more »
The best games that came out for iPhone...
It's not been the best week for games on the App Store. There are a few decent ones here and there, but nothing that's really going to make you throw down what you're doing and run to the nearest WiFi hotspot in order to download it. That's not to... | Read more »
Death Coming (Games)
Death Coming Device: iOS Universal Category: Games Price: $1.99, Version: (iTunes) Description: --- Background Story ---You Died. Pure and simple, but death was not the end. You have become an agent of Death: a... | Read more »
Hints, tips, and tricks for Empires and...
Empires and Puzzles is a slick match-stuff RPG that mixes in a bunch of city-building aspects to keep things fresh. And it's currently the Game of the Day over on the App Store. So, if you're picking it up for the first time today, we thought it'd... | Read more »
What You Need to Know About Sam Barlow’s...
Sam Barlow’s follow up to Her Story is #WarGames, an interactive video series that reimagines the 1983 film WarGames in a more present day context. It’s not exactly a game, but it’s definitely still interesting. Here are the top things you should... | Read more »
Pixel Plex Guide - How to Build Better T...
Pixel Plex is the latest city builder that has come to the App Store, and it takes a pretty different tact than the ones that came before it. Instead of being in charge of your own city by yourself, you have to work together with other players to... | Read more »
Fortnite Will Be Better Than PUBG on Mob...
Before last week, if you asked me which game I prefer between Fortnite Battle Royale and PlayerUnknown’s Battlegrounds (PUBG), I’d choose the latter just about 100% of the time. Now that we know that both games are primed to hit our mobile screens... | Read more »
Siege of Dragonspear (Games)
Siege of Dragonspear 2.5.12 Device: iOS Universal Category: Games Price: $9.99, Version: 2.5.12 (iTunes) Description: Experience the Siege of Dragonspear, an epic Baldur’s Gate tale, filled with with intrigue, magic, and monsters.... | Read more »

Price Scanner via

Sunday Sales: $200 off 13″ Touch Bar MacBook...
Amazon has new 2017 13″ 3.1GHz Touch Bar MacBook Pros on sale this weekend for $200 off MSRP, each including free shipping: – 13″ 3.1GHz/256GB Space Gray MacBook Pro (MPXV2LL/A): $1599.99 $200 off... Read more
B&H drops prices on 15″ MacBook Pros up t...
B&H Photo has dropped prices on new 2017 15″ MacBook Pros, now up to $300 off MSRP and matching Adorama’s price drop yesterday. Shipping is free, and B&H charges sales tax for NY & NJ... Read more
Apple restocks Certified Refurbished 2017 13″...
Apple has restocked Certified Refurbished 2017 13″ 2.3GHz MacBook Pros for $200-$230 off MSRP. A standard Apple one-year warranty is included with each MacBook, models receive new outer cases, and... Read more
13″ Space Gray Touch Bar MacBook Pros on sale...
Adorama has new 2017 13″ Space Gray Touch Bar MacBook Pros on sale for $150 off MSRP. Shipping is free, and Adorama charges sales tax in NY & NJ only: – 13″ 3.1GHz/256GB Space Gray MacBook Pro (... Read more
Best deal of the year on 15″ Apple MacBook Pr...
Adorama has New 2017 15″ MacBook Pros on sale for up to $300 off MSRP. Shipping is free, and Adorama charges sales tax in NJ and NY only: – 15″ 2.8GHz Touch Bar MacBook Pro Space Gray (MPTR2LL/A): $... Read more
Save $100-$150+ on 13″ Touch Bar MacBook Pros...
B&H Photo has 13″ Touch Bar MacBook Pros on sale for $100-$150 off MSRP. Shipping is free, and B&H charges sales tax for NY & NJ residents only: – 13″ 3.1GHz/256GB Space Gray MacBook Pro... Read more
Current deals on 27″ Apple iMacs, models up t...
B&H Photo has 27″ iMacs on sale for up to $150 off MSRP. Shipping is free, and B&H charges sales tax for NY & NJ residents only: – 27″ 3.8GHz iMac (MNED2LL/A): $2149 $150 off MSRP – 27″ 3... Read more
Thursday Deal: 13″ 2.3GHz MacBook Pro for $11...
B&H Photo has the 13″ 2.3GHz/128GB Space Gray MacBook Pro on sale for $100 off MSRP. Shipping is free, and B&H charges sales tax for NY & NJ residents only: – 13-inch 2.3GHz/128GB Space... Read more
How to save $100-$190 on 10″ & 12″ iPad P...
Apple is now offering Certified Refurbished 2017 10″ and 12″ iPad Pros for $100-$190 off MSRP, depending on the model. An Apple one-year warranty is included with each model, and shipping is free: –... Read more
Silver 12″ 1.3GHz MacBook on sale at B&H...
B&H Photo has the 2017 12″ 1.3GHz Silver MacBook on sale for $1399.99 including free shipping plus sales tax for NY & NJ residents only. Their price is $200 off MSRP, and it’s the lowest... Read more

Jobs Board

*Apple* Genius - Technical Customer Service...
Job Description:Job SummaryAs a Genius at the Apple Store, you maintain customers' trust in Apple as the skilled technical customer service expert, Read more
*Apple* Endpoint Administrator - Massachuset...
Reporting to the Director of Client Services (DCS), the Apple Endpoint Administrator serves as a member of the Client Services team, which provides technical support Read more
Franchise Operations Advisor- *APPLE* Exper...
UFG, Inc. Franchise Operations Advisor - MUST HAVE APPLE OR WINDOWS EXPERIENCE (Outside Sales / Business Development / Customer Service / Full Time) Top Five Reasons Read more
Engineering- Platform- *Apple* Enterprise P...
…& RESPONSIBILITIES You are responsible for creating and supporting our next-gen Apple Platform Installers from ground-up. We use Jamf Composer tool along with Read more
*Apple* OS X Server Administrator (Active Se...
Apple OS X Server Administrator \(Active Secret Clearance\) Description Come be a part of a top notch team, apply today\!\! Tuva TUVA provides turnkey solutions that Read more
All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.