TweetFollow Us on Twitter

Dec 97 Challenge

Volume Number: 13 (1997)
Issue Number: 12
Column Tag: Programmer's Challenge

by Bob Boonstra, Westford, MA

Clueless Crosswords

A couple of months ago, Bob Noll sent me a Challenge suggestion involving a crossword puzzle variant published by one of his local newspapers. The difficulty in using that suggestion was deciding how to provide the clues to the puzzle in a usable form. I thought about providing some sort of thesaurus, but giving simple synonyms as clues didn't seem to capture the crossword spirit. Then it occurred to me that clues serve only to make the crossword easy to solve, an advantage that certainly wouldn't be needed by our skilled Challenge readers or by the code they write. So the Challenge this month is to write code that will solve a crossword puzzle without clues. The prototype for the code you should write is:

#define kMaxSize 32
typedef char Puzzle[kMaxSize][kMaxSize];

void Crossword(
  Puzzle thePuzzle,     /* return solved puzzle here */
  char *dictionary[],   /* array of words to choose from */
  long puzzleSize,      /* number of rows/cols in puzzle */
  long dictSize         /* number of words in dictionary */
);

Your Crossword routine will be provided with thePuzzle, where cell thePuzzle[row][col] will be initialized to a zero if you are to fill in that cell, or initialized to 0xFF if the cell is blacked out. The first puzzleSize rows and columns constitute the puzzle; the remaining cells in the Puzzle array are padding and should be ignored. You are to fill in the empty cells of thePuzzle with words from the dictionary provided, such that each uninterrupted sequence of blank cells, both horizontal and vertical, forms a word from the dictionary. The dictionary will contain all of the words needed to solve thePuzzle, but, to make things more interesting, it will also contain extra words not needed to solve thePuzzle. The dictionary may contain only a few extra words, or it may contain as many as 10 extra words for each word used in thePuzzle. Words in the dictionary are not guaranteed to be in any order, and any word might be used more than once in thePuzzle.

Each puzzle is guaranteed to have at least one solution using the dictionary provided. You will be guaranteed 20MB of memory for your code, static data, and any dynamically allocated memory. You may use more memory if it is available, but your code should detect and respond to memory allocation failures if you ask for more than the guaranteed amount of memory. As always, you must deallocate any dynamically allocated memory before returning.

This will be a native PowerPC Challenge, using the latest CodeWarrior environment. Solutions may be coded in C, C++, or Pascal. The Challenge winner will be the entry that provides a correct solution to a set of crossword puzzles in the minimum time. Thanks to Bob Noll for suggesting a crossword puzzle problem -- he wins two Challenge points for the suggestion.

Three Months Ago Winner

Congratulations to Ludovic Nicolle (St-Nicolas, Quebec) for submitting the winning entry to the Image Detector Challenge. The problem was to find all occurrences of a given pattern bitmap in a sequence of background bitmaps, subject to a specified allowable error rate. Five people submitted entries, and all but one of them performed correctly in my tests.

Both the winning entry and the close second place entry by Ernst Munter used 64K of static memory to look up the number of bits set in a given 16-bit value, as part of calculating the number of mismatched bits. Ludo gained some advantage by optimizing the detection routine DetectCenter, used to examine most of the background image, to process 16 potential matches in parallel and thus take advantage of the many registers available in the 604 processor. He also used an interesting technique to trick the compiler into keeping other local variables in registers, by declaring them to be parameters. Finally, Ludo notes in his commentary that the branch prediction capability of the 604 caused him to select a different code construct than the one that worked best on a 601-based machine.

The table below lists the execution time, code size, data size, and programming language for each entry. The number in parentheses after the entrant's name is the total number of Challenge points earned in all Challenges to date prior to this one.

       
      Name               Time         Code       Data        Language
Ludovic Nicolle (28)    13.74         8606      65860             C
Ernst Munter (290)       5.96         5276      65896           C++
Greg Cooper (54)        87.04         2420       2045             C
ACC Murphy (30)        252.71         2596        120           C++
A.H.                   431.30         4076        164             C

Looking Back to May - Equation Evaluator

Ron Avitzur, author of the Graphing Calculator that inspired the May Equation Evaluator Challenge, wrote to mention a technique that was not used by any of the entries in that Challenge. Ron pointed me to http://symbolicnet.mcs.kent.edu/areas/cr, which discusses a technique called Chains of Recurrence for optimizing function evaluation. The technique can provide speedups of a factor of 50 when evaluating functions over a range of uniformly spaced points. The web page allows you to enter an equation and then demonstrates the improvement. Thanks for the tip, Ron!

... and Back to July - Disambiguator

Ernst Munter wrote to point out a low-memory bug in his winning entry for the July Disambiguator Challenge that did not show up in my tests. Ernst wrote to say that "the published program works fine when tested with a generous allowance for private storage, as originally specified, i.e. at least 21 bytes/word + 1 byte per character of each word. However, the program was designed to require only about half as much memory. Unfortunately this has resulted in a bug which will occur with a findstring of "*" (return all words) because the function SendAll() will start scanning from pageGroup[0]. But pageGroup[0] was aliased to nextPage, just a temporary pointer variable, and never properly initialized. If memory was plentiful, the memory pointed to by pageGroup[0] would still be 0, and nothing bad happens, but otherwise it is likely to contain some data and result in an unmapped memory exception." Ernst provided the following replacement function to fix this bug:

 ulong SendAll(CCC* matchList[],ulong minLen) {
// Sends all words >= minimum length from all pages
  ulong numMatch=0;

/* insert the following line to fix bug */
  if (minLen<1) minLen=1;

  for (int len=MIN(31,minLen);len<32;len++) {
   Page* page=pageGroup[len];
   while (page) {
    numMatch=page->SendAll(matchList,numMatch);
    page=page->next;
   }
  }
  return numMatch;
 }

Top 20 Contestants

Here are the Top Contestants for the Programmer's Challenge. The numbers below include points awarded over the 24 most recent contests, including points earned by this month's entrants.

Rank  Name                Points
  1.  Munter, Ernst          210
  2.  Cooper, Greg            61
  3.  Lewis, Peter            57
  4.  Gregg, Xan              53
  5.  Nicolle, Ludovic        48
  6.  Boring, Randy           41
  8.  Murphy, ACC             34
  7.  Mallett, Jeff           30
  9.  Larsson, Gustav         27
 10.  Antoniewicz, Andy       24
 11   Picao, Miguel Cruz      21
 12.  Day, Mark               20
 13.  Higgins, Charles        20
 14.  Lengyel, Eric           20
 15.  Studer, Thomas          20
 16.  Saxton, Tom             17
 17.  Gundrum, Eric           15
 18.  Hart, Alan              14
 19.  O'Connor, Turlough      14
 20.  Karsh, Bill             12

Here is Ludo's winning solution:

ImgDetector.c

© 1997 Ludovic Nicolle

/*

General issues:
The code uses 3 functions, DetectLeft/Center/Right to find matches on each side and in the middle. The same three functions are used for the top/center/bottom on each column.

Algorithmic considerations:
the fundamental operation for each bit of the mask at any particular location on the image is the following one and referred as the xor/and later in this discussion:
mismatch = (pattern ^ background) & mask;
if mismatch == 1, you got a bit mismatch.

Since it was assumed the code would more naturally be called with (noise <0.5) than greater, it made sense to count the mismatches. The code actually substract any mismatch from the maximum allowed. (The variables names are maxBad for the maximum and remBad for the remaining allowed bad bits at any time in the process.)

The first natural step of optimization was to treat the data in parallel, either 8, 16 or 32 bits at a time. I chose to work on a 16 bits basis. After the entire operation of xor/and has been done on 16 bits, the number of 1's in the 16 bits is loaded from a 64k static array (named gBitsOn) containing a 2^16 chars (this method proved to be statistically much faster than anything else).

Since we needed to "move" the mask and pattern in parallel over the background, I choosed to move the background instead so I had only one variable to shift each time.

In the DectectLeft/Right functions, the code reflects only those considerations, with a special treatment for the border when it is not flush.

The DetectCenter function uses a more sophisticated algorithm derived form the simple one described above. While written in pure C portable code, is is really optimized for the register-rich PowerPC architecture.

It uses 16 registers to treat 16 "remBad" in parallel. Each time a short is loaded for the pattern and for the mask, it is used to xor/and with 16 different positions of the background. Reducing the number of loads from the memory maximize the troughput of the function. An other register is used to globally monitor the status of the 16 remBads, using a simple bit array, and is called remFlag.

To achieve the best performance, all the 16 local remBads had to be in registers. Intermediate versions having only 10 to 15 remBads in registers performed less than the all-in-regs one. To free as much registers as possible, the DetectCenter function was tweeked as much as possible:

  • since the pattern and mask had no padding rowBytes (rowBytes was still a multiple of 2 of course, but not necessarily of 4), the internal ptrs didn't needed intermediate line ptrs (they are used on the Left/Right)
  • the line index of the mask/pattern is a float, using the otherwise unused floating point unit of the processor,
  • many local variables were placed as dumb parameters of the function (the ImageDetect calls use nil/0 as the 6 first parameters) to fool the PowerPC Compiler which follows the PowerPC binary architecture for allocating parameters and local variables.

Many parameters were put as stack parameters in order to free enough space for the remBad's and other inner loops variables.

As a last note on this optimization issue, I want to say this version of the code uses an if (remBadxx) statement before each xor/and. On my PPC 601, this was less efficient than blind execution of the xor/and followed by the check to see if the remBad was now under 0. On the PPC 604, my tests showed that this version was faster, probably due to one or both of the following factors:

  • branch prediction/excution is faster on the 604,
  • the 604/memory speed ratio being greater than with my 601, the load from the gBitsOn array incurs a greater time penalty than the time taken for branching.
*/


/*
InitTarget

InitTarget jobs are:

  • to count the number of bits inside the pattern,
  • to build an array containing the number of bits to remove when the mask is placed partially outside the backgroundImage,
  • to find how many white rows and cols are on the left/right/top/bottom of the mask and squeeze the pattern and mask accordingly
  • to make local copies of the pattern and mask that have no extra padding rowBytes,
  • to zero any mask bits on the right end of those rows if they are not a multiple of 16.

ImageDetect determines the number of bad bits allowed with the noise threshold then determines the number of rows must be tested on the top/bottom border. It also sets a few globals about the locations.

It then repeatedly calls DetectLeft/Center/Right for the top. It then calls the three functions once again for the middle (vertically speaking). Finally, they are called repeactedly again on the bottom.

*/

typedef unsigned short  ushort;
typedef unsigned long  ulong;

/* the gBitsOn array is in the BitsOn.c file which must be linked into the project. */
extern unsigned char  gBitsOn[256*256];

/*  Globals  */
BitMap  gPattern;
BitMap  gMask;

ushort  gmkWidth;
ushort  gmkHeight;
Point  gmkSkip;

Point  *gLocations;
long    gLocationsCt;
long    gMaxLocations;

ulong  gmkTotalBits;
ulong  *gmkBitsCache;

void InitTarget(
 BitMap pattern,     /* image to be detected */
 BitMap mask       /* bits in image that we care about */
);

long /* numFound */ ImageDetect(
 BitMap  backgroundImage,  /* find the target image in backgroundImage */
 Point  locations],        /* return topLeft of matching locations here */
 long    maxLocations,      /* max number of locations to return */
 float  noise            /* allow this fraction of mismatched bits */
);

void CleanUp(void);    /* deallocate any memory allocated by InitTarget */

InitTarget
void InitTarget(
BitMap pattern,       /* image to be detected */
BitMap mask         /* bits in image that we care about */
)
{
  ulong  mkSize;
  short  height, width;
  short  minRowBytes;
  short  lineIdx, colIdx;
  short  mkTopSkip, mkBotSkip, mkRightSkip, mkLeftSkip;
  Rect    srcRect, destRect;
  ulong  *mkBitsCache;
  ushort  *mkLinePtr, *mkCurPtr;
  ulong  bitsCt;
  Ptr    mkBaseAddr;
  short  offSet;
  
/*  Calculating mask size  */
  width = mask.bounds.right - mask.bounds.left;
  height = mask.bounds.bottom - mask.bounds.top;

/*  Minimizing rowBytes and copying bitmaps structures
  and setting mask/pattern topleft to (0,0)    */
  minRowBytes = 2 * ((width + 15) / 16);
  mkSize = height * minRowBytes;
  gMask.rowBytes = minRowBytes;
  gMask.bounds.top = 0;
  gMask.bounds.left = 0;
  gMask.bounds.bottom = height;
  gMask.bounds.right = width;

  gMask.baseAddr = NewPtr(mkSize);
  if (width % 16)
  {  /* Zeroing the last short of each row  */
    offSet = minRowBytes - 2;
    (Ptr)mkLinePtr = gMask.baseAddr + offSet;
    for (lineIdx = 0; lineIdx < height; lineIdx++)
    {
      (*mkLinePtr) = 0;
      (Ptr)mkLinePtr += minRowBytes;
    }
  }
  CopyBits(&mask, &gMask, &mask.bounds, 
            &gMask.bounds, srcCopy, nil);
  
/*  filling lines cache, removing empty top lines and
  counting empty top lines. */
  (Ptr)mkBitsCache = NewPtr(sizeof(ulong) *
                    height * width);
  gmkBitsCache = mkBitsCache;
  (Ptr)mkLinePtr = gMask.baseAddr;
  bitsCt = 0;
  mkTopSkip = 0;
  for (lineIdx = 0; lineIdx < height; lineIdx++)
  {
    if (mkBitsCache)
      mkBitsCache[(lineIdx - mkTopSkip) * width] = 
                          bitsCt;
    mkCurPtr = mkLinePtr;
    (Ptr)mkLinePtr += minRowBytes;
    for (; mkCurPtr < mkLinePtr; mkCurPtr++)
      bitsCt += gBitsOn[*mkCurPtr];
    if (bitsCt == 0)
      mkTopSkip++;
  }
  gmkTotalBits = bitsCt;
  
/*  counting empty bottom lines  */
  mkBotSkip = 0;
  lineIdx = height - mkTopSkip - 1;
  for (lineIdx = height - mkTopSkip - 1; (lineIdx > 0) && 
        (mkBitsCache[lineIdx * width] == bitsCt);
                        lineIdx--)
      mkBotSkip++;
  
  height -= (mkTopSkip + mkBotSkip);
  mkBaseAddr = gMask.baseAddr + mkTopSkip * minRowBytes;
  
/*  filling the bits cache*/
  if (gmkBitsCache)
  {
    for (colIdx = 1; colIdx < width; colIdx++)
    {
      ushort  mkMask;
      ulong  freeBitsCt;
      short  colModulo;
      
      (Ptr)mkLinePtr = mkBaseAddr +
                (height - 1) * minRowBytes;
      mkLinePtr += (colIdx - 1) / 16 ;
      colModulo = (colIdx - 1) % 16;
      mkMask = 0xFFFF << (15 - colModulo);
      freeBitsCt = 0;
      for (lineIdx = height - 1; lineIdx >= 0; 
                        lineIdx--)
      {
        freeBitsCt += 
              gBitsOn[(*mkLinePtr) & mkMask];
        bitsCt = freeBitsCt +
              mkBitsCache[lineIdx * width + 
                  colIdx - 1 - colModulo];
        mkBitsCache[lineIdx * width + colIdx] = 
                          bitsCt;
        (Ptr)mkLinePtr -= minRowBytes;
      }
    }
  }

/*  calculating left and right empty cols  */
  mkLeftSkip = 0;
  for (colIdx = 1; 
      (colIdx < width) && (mkBitsCache[colIdx] == 0);
                        colIdx++)
      mkLeftSkip++;
  mkRightSkip = 0;
  for (colIdx = width - 1; 
      (colIdx > 0) && (mkBitsCache[colIdx] == bitsCt);
                        colIdx--)
      mkRightSkip++;
/*  restructuring mkBitsCache according to the new width if it's smaller. */
  if ((mkRightSkip + mkLeftSkip) > 0)
  {
    short  oldWidth = width;
    
    width -= (mkRightSkip + mkLeftSkip);
    minRowBytes = 2 * ((width + 15) / 16);
    
    for (lineIdx = 0; lineIdx < height; lineIdx++)
      for (colIdx = 0; colIdx < width; colIdx++)
        mkBitsCache[lineIdx * width + colIdx] = 
          mkBitsCache[lineIdx * oldWidth + 
                  colIdx + mkLeftSkip];
  }
  
/*  initializing the pattern BitMap. the allocated space
  will be used for mask or pattern data. */
  gPattern.rowBytes = minRowBytes;
  gPattern.bounds.top = 0;
  gPattern.bounds.left = 0;
  gPattern.bounds.bottom = height;
  gPattern.bounds.right = width;
  mkSize = minRowBytes * height;
  gPattern.baseAddr = NewPtr(mkSize);
  
  if ((mkTopSkip > 0) || (mkLeftSkip > 0) || 
    (minRowBytes < gMask.rowBytes))
  {  /* I must recopy the mask bits */    
    srcRect.top = mkTopSkip;
    srcRect.left = mkLeftSkip;
    srcRect.bottom = mkTopSkip + height;
    srcRect.right = mkLeftSkip + width;
    destRect.top = 0;
    destRect.left = 0;
    destRect.bottom = height;
    destRect.right = width;
    
    if (width % 16)
    {  /* Zeroing the last short of each row */      
      offSet = minRowBytes - 2;
      (Ptr)mkLinePtr = gPattern.baseAddr + offSet;
      for (lineIdx = 0; lineIdx < height; lineIdx++)
      {
        (*mkLinePtr) = 0;
        (Ptr)mkLinePtr += minRowBytes;
      }
    }
    CopyBits(&gMask, &gPattern, &srcRect, &destRect,
                    srcCopy, nil);
/*  switching bits data between gMask and gPattern  */
    (Ptr)mkLinePtr = gMask.baseAddr;
    gMask = gPattern;
    gPattern.baseAddr = (Ptr)mkLinePtr;
  }
  
  srcRect = pattern.bounds;
  srcRect.top += mkTopSkip;
  srcRect.bottom -= mkBotSkip;
  srcRect.left += mkLeftSkip;
  srcRect.right -= mkRightSkip;
  CopyBits(&pattern, &gPattern, &srcRect, 
            &gPattern.bounds, srcCopy, nil);
  
  gmkWidth = width;
  gmkHeight = height;
  gmkSkip.v = mkTopSkip;
  gmkSkip.h = mkLeftSkip;
}

CleanUp
void CleanUp(void)  /* deallocate any memory allocated by InitTarget */
{
  if (gPattern.baseAddr)
    DisposePtr(gPattern.baseAddr);
  if (gMask.baseAddr)
    DisposePtr(gMask.baseAddr);
  
  if (gmkBitsCache)
    DisposePtr((Ptr)gmkBitsCache);
}

Boolean DetectLeft(
BitMap*  picture, 
long  maxBad,
short  mkRowBytes,
short  picRowBytes,
short  picTop, 
short  picTopLow,
short  mkTop,
short  mkBottom,
short  mkWidth);

Boolean DetectCenter(
ushort  *patCurPtr,
ushort  *mkCurPtr,
ushort  *picLinePtr,
ushort  *picCurPtr,
ulong  picLong,
long  dumbReg,
long  mkRowBytes,
long  picRowBytes,
long  mkTop,
long  picTop,
long  maxBad,
long  picTopLow,
long  picWidth,
long  mkBottom,
BitMap*  picture);

Boolean DetectRight(
BitMap*  picture, 
long  maxBad,
short  mkRowBytes,
short  picRowBytes,
short  picTop, 
short  picTopLow,
short  mkTop,
short  mkBottom,
short  picWidth,
short  mkWidth);


ImageDetect
long /* numFound */ ImageDetect(
 BitMap backgroundImage, /* find the target image in backgroundImage */
 Point locations[],     /* return topLeft of matching locations here */
 long maxLocations,     /* max number of locations to return */
 float noise         /* allow this fraction of mismatched bits */
)
{
  ulong  maxBad;
  short  picWidth, picHeight;
  ulong  *mkBitsCache;
  short  mkRowBytes;
  short  picRowBytes;
  short  mkLine, outTop, outBottom;
  long  totalBits;
  
  gLocations = locations;
  gLocationsCt = 0;
  gMaxLocations = maxLocations;
  
  if (gmkBitsCache == nil)/*cannot work without cache */
    return 0;            /*but this could be patched */
  if (noise < 0.0 || noise >= 1.0)
    return 0;            /* not supposed to happen */
  if (gmkTotalBits == 0)
    return 0;            /* there is no bits in the mask */
  maxBad = gmkTotalBits * noise;
  
  
  picWidth = backgroundImage.bounds.right - 
          backgroundImage.bounds.left;
  picHeight = backgroundImage.bounds.bottom - 
          backgroundImage.bounds.top;
  
  if ((picWidth < gmkWidth) ||
    (picHeight < gmkHeight))
    return 0;            /* not supposed to happen */
  
  mkBitsCache = gmkBitsCache;
  mkRowBytes = gMask.rowBytes;
  picRowBytes = backgroundImage.rowBytes;
  
/* scan top  */
  mkLine = 1;
  while ((mkLine < gmkHeight) &&
      (mkBitsCache[mkLine * gmkWidth] <= maxBad))
    mkLine++;

  for (outTop = mkLine - 1; outTop >= 1; outTop--)
  {
    if (DetectLeft(&backgroundImage, maxBad, 
      mkRowBytes, picRowBytes,
      backgroundImage.bounds.top, 
      backgroundImage.bounds.top + 1, 
      outTop, gmkHeight, gmkWidth))
      return gLocationsCt;
    if (DetectCenter(nil, nil, nil, nil, 0, 0,
      mkRowBytes, picRowBytes, outTop,
      backgroundImage.bounds.top, 
      maxBad - mkBitsCache[outTop * gmkWidth],
      backgroundImage.bounds.top + 1, 
      picWidth, gmkHeight, &backgroundImage))
      return gLocationsCt;
    if (DetectRight(&backgroundImage, maxBad,
      mkRowBytes, picRowBytes,
      backgroundImage.bounds.top, 
      backgroundImage.bounds.top + 1, 
      outTop, gmkHeight, picWidth, gmkWidth))
      return gLocationsCt;
  }

/*  scan middle  left */
  if (DetectLeft(&backgroundImage, maxBad, 
      mkRowBytes, picRowBytes,
      backgroundImage.bounds.top, 
      backgroundImage.bounds.bottom - gmkHeight + 1,
      0, gmkHeight, gmkWidth))
    return gLocationsCt;
/*  scan middle  center */
  if (DetectCenter(nil, nil, nil, nil, 0, 0,
      mkRowBytes, picRowBytes, 0,
      backgroundImage.bounds.top, maxBad, 
      backgroundImage.bounds.bottom - gmkHeight + 1,
      picWidth, gmkHeight, &backgroundImage))
    return gLocationsCt;
/*  scan middle  right */
  if (DetectRight(&backgroundImage, maxBad, 
      mkRowBytes, picRowBytes,
      backgroundImage.bounds.top, 
      backgroundImage.bounds.bottom - gmkHeight + 1,
      0, gmkHeight, picWidth, gmkWidth))
    return gLocationsCt;

/*  scan bottom */
  totalBits = gmkTotalBits;
  mkLine = 1;
  while ((mkLine < gmkHeight) && ((gmkTotalBits - 
      mkBitsCache[(gmkHeight - mkLine) * gmkWidth]) 
                  <= maxBad))
    mkLine++;

  for (outBottom = 1; outBottom < mkLine; outBottom++)
  {
    if (DetectLeft(&backgroundImage, maxBad,
      mkRowBytes, picRowBytes,
      backgroundImage.bounds.bottom - gmkHeight + 
                        outBottom, 
      backgroundImage.bounds.bottom,
      0, gmkHeight - outBottom, gmkWidth))
      return gLocationsCt;
    if (DetectCenter(nil, nil, nil, nil, 0, 0,
      mkRowBytes, picRowBytes, 0,
      backgroundImage.bounds.bottom - gmkHeight + 
                        outBottom, 
      maxBad - totalBits + 
      mkBitsCache[(gmkHeight - outBottom) * gmkWidth],
      backgroundImage.bounds.bottom, picWidth, 
      gmkHeight - outBottom, &backgroundImage))
      return gLocationsCt;
    if (DetectRight(&backgroundImage, maxBad,
      mkRowBytes, picRowBytes,
      backgroundImage.bounds.bottom - gmkHeight + 
                        outBottom, 
      backgroundImage.bounds.bottom,
      0, gmkHeight - outBottom, picWidth, gmkWidth))
      return gLocationsCt;
  }

  return gLocationsCt;
}

DetectLeft
Boolean DetectLeft(
BitMap*  picture, 
long  maxBad,
short  mkRowBytes,
short  picRowBytes,
short  picTop, 
short  picTopLow,
short  mkTop,
short  mkBottom,
short  mkWidth)
{
  ushort  *picBasePtr, *picLinePtr, *picCurPtr;
  ushort  *patBasePtr, *patLinePtr, *patCurPtr;
  ushort  *mkBasePtr, *mkLinePtr, *mkCurPtr,
      *mkEndOfLinePtr;
  
  short  mkLine;
  ushort  outLeft;
  ulong  picLong;
  ushort  picShift;
  long  remBad;
  ushort  mkout16s;
  
  for (;picTop < picTopLow; picTop++)
  {
  outLeft = 1;
  do
  {  /*  calculating remBad */
    if ((mkTop)  ||             // we're out by the top
      (mkBottom == gmkHeight))  // we are fully in
                            // vertically
      remBad = maxBad -
        gmkBitsCache[mkTop * mkWidth + outLeft];
    else
      remBad = maxBad - gmkTotalBits +
        gmkBitsCache[mkBottom * mkWidth + outLeft] -
                  gmkBitsCache[outLeft];
          
    if (remBad < 0)
      break;  // this causes the do{} to stop
    
    mkout16s = outLeft / 16;
    (Ptr)mkBasePtr = gMask.baseAddr + 
              mkTop * mkRowBytes + mkout16s;
    (Ptr)patBasePtr = gPattern.baseAddr + 
              mkTop * mkRowBytes + mkout16s;
    (Ptr)picBasePtr = picture->baseAddr + 
      (picTop - picture->bounds.top) * picRowBytes;

    picShift = outLeft & 0x0F;

/*  left border matching  */
    if (picShift)
    {
      ushort  mkMask;
      
      mkMask = 0xFFFF >> picShift;
      mkLinePtr = mkBasePtr++;
      patLinePtr = patBasePtr++;
      picLinePtr = picBasePtr++;
      for (mkLine = mkTop; mkLine < mkBottom; 
                        mkLine++)
      {
        picLong = *picLinePtr;
        (Ptr)picLinePtr += picRowBytes;
        remBad -= gBitsOn[
        ((*patLinePtr) ^ (picLong >> picShift)) &
                (*mkLinePtr) & mkMask];
        (Ptr)mkLinePtr += mkRowBytes;
        (Ptr)patLinePtr += mkRowBytes;
      }
    }
    if (remBad < 0)
      continue;
/* regular pattern matching*/
    mkLinePtr = mkBasePtr;
    (Ptr)mkEndOfLinePtr = gMask.baseAddr + 
                (mkTop + 1) * mkRowBytes;
    patLinePtr = patBasePtr;
    picLinePtr = picBasePtr;
  /*for each line in the mask  */
    for (mkLine = mkTop; mkLine < mkBottom; mkLine++)
    {
      mkCurPtr = mkLinePtr;
      patCurPtr = patLinePtr;
      picCurPtr = picLinePtr;
      picLong = *picCurPtr++;
      if (picShift)
      {
        picLong <<= 16;
        picLong |= *picCurPtr++;
      }
  /* for each 16s of the mask inside the pict */
      for (; mkCurPtr < mkEndOfLinePtr; mkCurPtr++)
      {
        remBad -= gBitsOn[((*patCurPtr++) ^
          (picLong >> picShift)) & (*mkCurPtr)];
        picLong <<= 16;
        picLong  |= *picCurPtr++;
      }
      if (remBad < 0)
        break;
      (Ptr)mkLinePtr += mkRowBytes;
      (Ptr)mkEndOfLinePtr += mkRowBytes;
      (Ptr)patLinePtr += mkRowBytes;
      (Ptr)picLinePtr += picRowBytes;
    }
    if (remBad >= 0)
    {
      if (gLocationsCt < gMaxLocations)
      {
        gLocations[gLocationsCt].v = 
            picTop - mkTop - gmkSkip.v;
        gLocations[gLocationsCt++].h = 
            picture->bounds.left - outLeft
                  - gmkSkip.h;
      } else
        return true;
    }
  } while (++outLeft < mkWidth);

  }
  return false;
}

#define AddCenterLocation(rem, shift);    \
  if (rem >= 0)                          \
  {                                    \
    if (gLocationsCt < gMaxLocations)      \
    {                                  \
      gLocations[gLocationsCt].v =       \
            picTop - mkTop - gmkSkip.v;  \
      gLocations[gLocationsCt++].h =       \
        picture->bounds.left + shift +    \
        (picWidth - picRemain)            \
               - gmkSkip.h;              \
    } else                              \
      return true;                      \
  }

DetectCenter
Boolean DetectCenter(
ushort  *patCurPtr,
ushort  *mkCurPtr,
ushort  *picLinePtr,
ushort  *picCurPtr,
ulong  picLong,
long  dumbReg,
long  mkRowBytes,
long  picRowBytes,
long  mkTop,
long  picTop,
long  maxBad,
long  picTopLow,
long  picWidth,
long  mkBottom,
BitMap*  picture
)
{
  short  picRemain;
  float  mkLineStart;
  float  mkLine;
  
  mkLineStart = mkBottom - mkTop - 0.5;
  picWidth -= gmkWidth;
  
  for (; picTop < picTopLow; picTop++)
  {
  picRemain = picWidth;
  do
  {
    register ushort  remFlag;
    register long
        remBad00, remBad01, remBad02, remBad03,
        remBad04, remBad05, remBad06, remBad07,
        remBad08, remBad09, remBad10, remBad11,
        remBad12, remBad13, remBad14, remBad15;

/* initializing the remBads and remFlag */
    remFlag  =  0xFFFF;
    remBad00  =  maxBad;    remBad01  =  remBad00;
    remBad02  =  remBad00;  remBad03  =  remBad01;
    remBad04  =  remBad00;  remBad05  =  remBad01;
    remBad06  =  remBad00;  remBad07  =  remBad01;
    remBad08  =  remBad00;  remBad09  =  remBad01;
    remBad10  =  remBad00;  remBad11  =  remBad01;
    remBad12  =  remBad00;  remBad13  =  remBad01;
    remBad14  =  remBad00;  remBad15  =  remBad01;
    
    switch (picRemain)
    {
      case 0:    remBad01  =  -1;
      case 1:    remBad02  =  -1;
      case 2:    remBad03  =  -1;
      case 3:    remBad04  =  -1;
      case 4:    remBad05  =  -1;
      case 5:    remBad06  =  -1;
      case 6:    remBad07  =  -1;
      case 7:    remBad08  =  -1;
      case 8:    remBad09  =  -1;
      case 9:    remBad10  =  -1;
      case 10:    remBad11  =  -1;
      case 11:    remBad12  =  -1;
      case 12:    remBad13  =  -1;
      case 13:    remBad14  =  -1;
      case 14:    remBad15  =  -1;
    }
    (Ptr)mkCurPtr = 
          gMask.baseAddr + mkTop * mkRowBytes;
    (Ptr)patCurPtr = 
          gPattern.baseAddr + mkTop * mkRowBytes;
/* regular pattern matching*/
    (Ptr)picLinePtr = picture->baseAddr +
      (picTop - picture->bounds.top) * picRowBytes;
    picLinePtr += (picWidth - picRemain) / 16;
    
  /*for each line in the mask  */
    for (mkLine = mkLineStart; mkLine > 0.0; mkLine--)
    {
      picCurPtr = picLinePtr;
      (Ptr)picLinePtr += mkRowBytes;
      picLong = *picCurPtr++;
  /* for each 16s of the mask  */
      for (; picCurPtr <= picLinePtr; )
      {
        ulong mkLo, patLo;
        
        picLong <<= 16;
        picLong  |= *picCurPtr++;

        mkLo = (*mkCurPtr++);
        patLo = (*patCurPtr++);
        switch (picRemain)
        {
        default:
        case 15:
          if (remBad15 < 0)
            remFlag &= 0x7FFF;
          else remBad15 -= gBitsOn[(patLo ^
                (picLong >> 1)) & mkLo];
        case 14:
          if (remBad14 < 0)
            remFlag &= 0xBFFF;
          else remBad14 -= gBitsOn[(patLo ^
                (picLong >> 2)) & mkLo];
        case 13:
          if (remBad13 < 0)
            remFlag &= 0xDFFF;
          else remBad13 -= gBitsOn[(patLo ^
                (picLong >> 3)) & mkLo];
        case 12:
          if (remBad12 < 0)
            remFlag &= 0xEFFF;
          else remBad12 -= gBitsOn[(patLo ^
                (picLong >> 4)) & mkLo];
        case 11:
          if (remBad11 < 0)
            remFlag &= 0xF7FF;
          else remBad11 -= gBitsOn[(patLo ^
                (picLong >> 5)) & mkLo];
        case 10:
          if (remBad10 < 0)
            remFlag &= 0xFBFF;
          else remBad10 -= gBitsOn[(patLo ^
                (picLong >> 6)) & mkLo];
        case 9:
          if (remBad09 < 0)
            remFlag &= 0xFDFF;
          else remBad09 -= gBitsOn[(patLo ^
                (picLong >> 7)) & mkLo];
        case 8:
          if (remBad08 < 0)
            remFlag &= 0xFEFF;
          else remBad08 -= gBitsOn[(patLo ^
                (picLong >> 8)) & mkLo];
        case 7:
          if (remBad07 < 0)
            remFlag &= 0xFF7F;
          else remBad07 -= gBitsOn[(patLo ^
                (picLong >> 9)) & mkLo];
        case 6:
          if (remBad06 < 0)
            remFlag &= 0xFFBF;
          else remBad06 -= gBitsOn[(patLo ^
                (picLong >> 10)) & mkLo];
        case 5:
          if (remBad05 < 0)
            remFlag &= 0xFFDF;
          else remBad05 -= gBitsOn[(patLo ^
                (picLong >> 11)) & mkLo];
        case 4:
          if (remBad04 < 0)
            remFlag &= 0xFFEF;
          else remBad04 -= gBitsOn[(patLo ^
                (picLong >> 12)) & mkLo];
        case 3:
          if (remBad03 < 0)
            remFlag &= 0xFFF7;
          else remBad03 -= gBitsOn[(patLo ^
                (picLong >> 13)) & mkLo];
        case 2:
          if (remBad02 < 0)
            remFlag &= 0xFFFB;
          else remBad02 -= gBitsOn[(patLo ^
                (picLong >> 14)) & mkLo];
        case 1:
          if (remBad01 < 0)
            remFlag &= 0xFFFD;
          else remBad01 -= gBitsOn[(patLo ^
                (picLong >> 15)) & mkLo];
        case 0:
          if (remBad00 < 0)
            remFlag &= 0xFFFE;
          else remBad00 -= gBitsOn[(patLo ^
                (picLong >> 16)) & mkLo];
        }
      }
      (Ptr)picLinePtr -= mkRowBytes;
      (Ptr)picLinePtr += picRowBytes;
      
      if (remFlag == 0)
        break;
    }
    if (remFlag)
    {
      AddCenterLocation(remBad00, 0);    
      AddCenterLocation(remBad01, 1);    
      AddCenterLocation(remBad02, 2);    
      AddCenterLocation(remBad03, 3);    
      AddCenterLocation(remBad04, 4);    
      AddCenterLocation(remBad05, 5);    
      AddCenterLocation(remBad06, 6);    
      AddCenterLocation(remBad07, 7);    
      AddCenterLocation(remBad08, 8);    
      AddCenterLocation(remBad09, 9);    
      AddCenterLocation(remBad10, 10);    
      AddCenterLocation(remBad11, 11);    
      AddCenterLocation(remBad12, 12);    
      AddCenterLocation(remBad13, 13);    
      AddCenterLocation(remBad14, 14);    
      AddCenterLocation(remBad15, 15);    
    }
    picRemain -= 16;
  } while (picRemain >= 0);
  }
  
  return false;
}

DetectRight
Boolean DetectRight(
BitMap*  picture, 
long  maxBad,
short  mkRowBytes,
short  picRowBytes,
short  picTop,
short  picTopLow,
short  mkTop,
short  mkBottom,
short  picWidth,
short  mkWidth)
{
  ushort  *picBasePtr, *picLinePtr, *picCurPtr;
  ushort  *patBasePtr, *patLinePtr, *patCurPtr;
  ushort  *mkBasePtr, *mkLinePtr, *mkCurPtr,
      *mkEndOfLinePtr;
  
  short  mkLine;
  ushort  outRight;
  ulong  picLong;
  ushort  picShift;
  long    remBad;
  ushort  mkout16s;
  ushort  mktotal16s;
  ushort  mkModulo;
  ushort  picModulo;
  ushort  flushModulo;
  
  mkModulo = mkWidth & 0x0F;
  (Ptr)mkBasePtr = gMask.baseAddr + 
                    mkTop * mkRowBytes;
  (Ptr)patBasePtr = gPattern.baseAddr + 
                    mkTop * mkRowBytes;
  for (; picTop < picTopLow; picTop++)
  {
  outRight = 1;
  do
  {  /*  calculating remBad  */
    if ((mkTop)  ||             // we're out by the top
      (mkBottom == gmkHeight))  // we are fully in
                            // vertically
      remBad = maxBad - gmkTotalBits +
          gmkBitsCache[(mkTop + 1) * mkWidth - 
                      outRight] -
              gmkBitsCache[mkTop * mkWidth];
    else
      remBad = maxBad - gmkTotalBits +
          gmkBitsCache[mkWidth - outRight] +
          gmkBitsCache[mkBottom * mkWidth] -
          gmkBitsCache[(mkBottom + 1) * mkWidth - 
                        outRight];
    if (remBad < 0)
      break;  // this causes the do{} to stop

/*  setup  */
    mktotal16s = (mkWidth + 15) / 16;
    mkout16s = (outRight + 
          ((mkWidth - outRight - 1) & 0x0F)) / 16;
    (Ptr)picBasePtr = picture->baseAddr +
          (picTop - picture->bounds.top) * 
                        picRowBytes;
    picModulo = picWidth & 0x0F;
    flushModulo = (mkWidth - outRight) & 0x0F;
    picShift = flushModulo - picModulo;
      if (picShift < 0)
        picShift += 16;
/*  right border matching  */
    if (flushModulo > 0)
    {
      ulong  mkMask;
      
      mkLinePtr = mkBasePtr + mktotal16s - 
                      (mkout16s + 1);
      patLinePtr = patBasePtr + mktotal16s - 
                      (mkout16s + 1);
      picLinePtr = picBasePtr + (picWidth / 16 - 1);
      mkMask = 0xFFFF << (16 - flushModulo);
      for (mkLine = mkTop; 
              mkLine < mkBottom; mkLine++)
      {
        picLong = *picLinePtr;
        picLong <<= 16;
        if (picModulo)
          picLong = *(picLinePtr + 1);
        picLong = picLong >> picShift;

        remBad -= gBitsOn[((*patLinePtr) ^ picLong)
                 & (*mkLinePtr) & mkMask];
        
        (Ptr)mkLinePtr += mkRowBytes;
        (Ptr)patLinePtr += mkRowBytes;
        (Ptr)picLinePtr += picRowBytes;
      }
    }
    if (remBad < 0)
      continue;
/*  Regular pattern matching  */
    mkLinePtr = mkBasePtr;
    patLinePtr = patBasePtr;
    picLinePtr = picBasePtr + (picWidth / 16) - 
                  (mktotal16s - mkout16s);
    mkEndOfLinePtr = mkLinePtr + 
              mktotal16s - mkout16s;
    if (flushModulo)
      mkEndOfLinePtr--;
/*  for each line in the mask  */
    for (mkLine = mkTop; mkLine < mkBottom; mkLine++)
    {
      mkCurPtr = mkLinePtr;
      patCurPtr = patLinePtr;
      picCurPtr = picLinePtr;
      picLong = *picCurPtr++;
      if (picShift)
      {
        picLong <<= 16;
        picLong |= *picCurPtr++;
      }
  /* each short in the mask inside the pict  */
      for (; mkCurPtr < mkEndOfLinePtr; 
                      mkCurPtr++)
      {
        remBad -= gBitsOn[((*patCurPtr++) ^
          (picLong >> picShift)) & (*mkCurPtr)];
        picLong <<= 16;
        picLong  |= *picCurPtr++;
      }
      if (remBad < 0)
        break;
      (Ptr)mkLinePtr += mkRowBytes;
      (Ptr)mkEndOfLinePtr += mkRowBytes;
      (Ptr)patLinePtr += mkRowBytes;
      (Ptr)picLinePtr += picRowBytes;
    }
    if (remBad >= 0)
    {
      if (gLocationsCt < gMaxLocations)
      {
        gLocations[gLocationsCt].v = 
              picTop - mkTop - gmkSkip.v;
        gLocations[gLocationsCt++].h = 
          picture->bounds.right + outRight - 
              mkWidth - gmkSkip.h;
      } else
        return true;
    }
  } while (++outRight < mkWidth);
  
  }
  return false;
}

*BitsOn.c
/*
an array of 65536 char giving the number of 1's
in any 16 bit number.
*/

unsigned char  gBitsOn[256*256] = {  
 0, 1, 1, 2, 1, 2, 2, 3, 1, 2, 2, 3, 2, 3, 3, 4,
 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
 4, 5, 5, 6, 5, 6, 6, 7, 5, 6, 6, 7, 6, 7, 7, 8,
 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,

/*
  [ you get the idea ... most of the rest deleted ] 
*/

11,12,12,13,12,13,13,14,12,13,13,14,13,14,14,15,
 8, 9, 9,10, 9,10,10,11, 9,10,10,11,10,11,11,12,
 9,10,10,11,10,11,11,12,10,11,11,12,11,12,12,13,
 9,10,10,11,10,11,11,12,10,11,11,12,11,12,12,13,
10,11,11,12,11,12,12,13,11,12,12,13,12,13,13,14,
 9,10,10,11,10,11,11,12,10,11,11,12,11,12,12,13,
10,11,11,12,11,12,12,13,11,12,12,13,12,13,13,14,
10,11,11,12,11,12,12,13,11,12,12,13,12,13,13,14,
11,12,12,13,12,13,13,14,12,13,13,14,13,14,14,15,
 9,10,10,11,10,11,11,12,10,11,11,12,11,12,12,13,
10,11,11,12,11,12,12,13,11,12,12,13,12,13,13,14,
10,11,11,12,11,12,12,13,11,12,12,13,12,13,13,14,
11,12,12,13,12,13,13,14,12,13,13,14,13,14,14,15,
10,11,11,12,11,12,12,13,11,12,12,13,12,13,13,14,
11,12,12,13,12,13,13,14,12,13,13,14,13,14,14,15,
11,12,12,13,12,13,13,14,12,13,13,14,13,14,14,15,
12,13,13,14,13,14,14,15,13,14,14,15,14,15,15,16
};





  
 

Community Search:
MacTech Search:

Software Updates via MacUpdate

Latest Forum Discussions

See All

Summon your guild and prepare for war in...
Netmarble is making some pretty big moves with their latest update for Seven Knights Idle Adventure, with a bunch of interesting additions. Two new heroes enter the battle, there are events and bosses abound, and perhaps most interesting, a huge... | Read more »
Make the passage of time your plaything...
While some of us are still waiting for a chance to get our hands on Ash Prime - yes, don’t remind me I could currently buy him this month I’m barely hanging on - Digital Extremes has announced its next anticipated Prime Form for Warframe. Starting... | Read more »
If you can find it and fit through the d...
The holy trinity of amazing company names have come together, to release their equally amazing and adorable mobile game, Hamster Inn. Published by HyperBeard Games, and co-developed by Mum Not Proud and Little Sasquatch Studios, it's time to... | Read more »
Amikin Survival opens for pre-orders on...
Join me on the wonderful trip down the inspiration rabbit hole; much as Palworld seemingly “borrowed” many aspects from the hit Pokemon franchise, it is time for the heavily armed animal survival to also spawn some illegitimate children as Helio... | Read more »
PUBG Mobile teams up with global phenome...
Since launching in 2019, SpyxFamily has exploded to damn near catastrophic popularity, so it was only a matter of time before a mobile game snapped up a collaboration. Enter PUBG Mobile. Until May 12th, players will be able to collect a host of... | Read more »
Embark into the frozen tundra of certain...
Chucklefish, developers of hit action-adventure sandbox game Starbound and owner of one of the cutest logos in gaming, has released their roguelike deck-builder Wildfrost. Created alongside developers Gaziter and Deadpan Games, Wildfrost will... | Read more »
MoreFun Studios has announced Season 4,...
Tension has escalated in the ever-volatile world of Arena Breakout, as your old pal Randall Fisher and bosses Fred and Perrero continue to lob insults and explosives at each other, bringing us to a new phase of warfare. Season 4, Into The Fog of... | Read more »
Top Mobile Game Discounts
Every day, we pick out a curated list of the best mobile discounts on the App Store and post them here. This list won't be comprehensive, but it every game on it is recommended. Feel free to check out the coverage we did on them in the links below... | Read more »
Marvel Future Fight celebrates nine year...
Announced alongside an advertising image I can only assume was aimed squarely at myself with the prominent Deadpool and Odin featured on it, Netmarble has revealed their celebrations for the 9th anniversary of Marvel Future Fight. The Countdown... | Read more »
HoYoFair 2024 prepares to showcase over...
To say Genshin Impact took the world by storm when it was released would be an understatement. However, I think the most surprising part of the launch was just how much further it went than gaming. There have been concerts, art shows, massive... | Read more »

Price Scanner via MacPrices.net

You can save $300-$480 on a 14-inch M3 Pro/Ma...
Apple has 14″ M3 Pro and M3 Max MacBook Pros in stock today and available, Certified Refurbished, starting at $1699 and ranging up to $480 off MSRP. Each model features a new outer case, shipping is... Read more
24-inch M1 iMacs available at Apple starting...
Apple has clearance M1 iMacs available in their Certified Refurbished store starting at $1049 and ranging up to $300 off original MSRP. Each iMac is in like-new condition and comes with Apple’s... Read more
Walmart continues to offer $699 13-inch M1 Ma...
Walmart continues to offer new Apple 13″ M1 MacBook Airs (8GB RAM, 256GB SSD) online for $699, $300 off original MSRP, in Space Gray, Silver, and Gold colors. These are new MacBook for sale by... Read more
B&H has 13-inch M2 MacBook Airs with 16GB...
B&H Photo has 13″ MacBook Airs with M2 CPUs, 16GB of memory, and 256GB of storage in stock and on sale for $1099, $100 off Apple’s MSRP for this configuration. Free 1-2 day delivery is available... Read more
14-inch M3 MacBook Pro with 16GB of RAM avail...
Apple has the 14″ M3 MacBook Pro with 16GB of RAM and 1TB of storage, Certified Refurbished, available for $300 off MSRP. Each MacBook Pro features a new outer case, shipping is free, and an Apple 1-... Read more
Apple M2 Mac minis on sale for up to $150 off...
Amazon has Apple’s M2-powered Mac minis in stock and on sale for $100-$150 off MSRP, each including free delivery: – Mac mini M2/256GB SSD: $499, save $100 – Mac mini M2/512GB SSD: $699, save $100 –... Read more
Amazon is offering a $200 discount on 14-inch...
Amazon has 14-inch M3 MacBook Pros in stock and on sale for $200 off MSRP. Shipping is free. Note that Amazon’s stock tends to come and go: – 14″ M3 MacBook Pro (8GB RAM/512GB SSD): $1399.99, $200... Read more
Sunday Sale: 13-inch M3 MacBook Air for $999,...
Several Apple retailers have the new 13″ MacBook Air with an M3 CPU in stock and on sale today for only $999 in Midnight. These are the lowest prices currently available for new 13″ M3 MacBook Airs... Read more
Multiple Apple retailers are offering 13-inch...
Several Apple retailers have 13″ MacBook Airs with M2 CPUs in stock and on sale this weekend starting at only $849 in Space Gray, Silver, Starlight, and Midnight colors. These are the lowest prices... Read more
Roundup of Verizon’s April Apple iPhone Promo...
Verizon is offering a number of iPhone deals for the month of April. Switch, and open a new of service, and you can qualify for a free iPhone 15 or heavy monthly discounts on other models: – 128GB... Read more

Jobs Board

Relationship Banker - *Apple* Valley Financ...
Relationship Banker - Apple Valley Financial Center APPLE VALLEY, Minnesota **Job Description:** At Bank of America, we are guided by a common purpose to help Read more
IN6728 Optometrist- *Apple* Valley, CA- Tar...
Date: Apr 9, 2024 Brand: Target Optical Location: Apple Valley, CA, US, 92308 **Requisition ID:** 824398 At Target Optical, we help people see and look great - and Read more
Medical Assistant - Orthopedics *Apple* Hil...
Medical Assistant - Orthopedics Apple Hill York Location: WellSpan Medical Group, York, PA Schedule: Full Time Sign-On Bonus Eligible Remote/Hybrid Regular Apply Now Read more
*Apple* Systems Administrator - JAMF - Activ...
…**Public Trust/Other Required:** None **Job Family:** Systems Administration **Skills:** Apple Platforms,Computer Servers,Jamf Pro **Experience:** 3 + years of Read more
Liquor Stock Clerk - S. *Apple* St. - Idaho...
Liquor Stock Clerk - S. Apple St. Boise Posting Begin Date: 2023/10/10 Posting End Date: 2024/10/14 Category: Retail Sub Category: Customer Service Work Type: Part Read more
All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.