TweetFollow Us on Twitter

Java Grids
Volume Number:12
Issue Number:11
Column Tag:Getting Started

Two Java Grid Layouts

By Dave Mark

Note: Source code files accompanying article are located on MacTech CD-ROM or source code disks.

Last month, we introduced the Java Layout Manager and saw the power of layouts combined with panels. This month, we’ll look at two important layout classes, GridLayout and GridBagLayout, and present a series of applets that bring these two classes to life.

There is a newly reformatted set of Java API documentation, collectively known as the 1.0.2 API. If you don’t already have this, go get it now. The URL is:

http://java.sun.com/doc/api_documentation.html

There are two Mac download links on this page. Though it’s bigger, you might try the .hqx file (as opposed to the .bin file). I’m not sure why, but when I downloaded the .bin file and dropped it on StuffIt Expander, the final .sea file was corrupted. On the other hand, by the time you read this, the problem most likely will have been corrected.

GridLayout

As its name implies, the GridLayout lays out its components in a grid. GridLayout has two constructors:

public GridLayout( int  rows, int  cols );

This one creates a grid layout with the specified rows and columns. As you’ll see, GridLayout does the best it can to lay the current set of components out in this configuration. But what if you have too few components? Or too many? This month’s sample applets are ideal for experimenting.

The second constructor adds two new parameters:

public GridLayout( int  rows, int  cols,
                   int  hgap, int  vgap );

This version creates a grid layout with the specified rows and columns, but also lets you specify a minimal horizontal and vertical gap to appear between the components.

GridLayout is pretty straightforward. Here’s a sample applet to take it for a spin.

• Launch the CodeWarrior IDE and create a new “Java Applet” project called GridLayout.µ.

• Create a new source code window, type in the following source code, save as GridLayout.Java, and add to it the project.

import java.awt.*;

public class MyGrid extends java.applet.Applet
{
 public MyGrid()
 {
 setLayout( new GridLayout( 4, 4 ) );
 
 add( new Button( “1” ) );
 add( new Button( “2” ) );
 add( new Button( “3” ) );
 add( new Button( “4” ) );
 add( new Button( “5” ) );
 add( new Button( “6” ) );
 add( new Button( “7” ) );
 add( new Button( “8” ) );
 add( new Button( “9” ) );
 add( new Button( “10” ) );
 add( new Button( “11” ) );
 add( new Button( “12” ) );
 add( new Button( “13” ) );
 add( new Button( “14” ) );
 add( new Button( “15” ) );
 add( new Button( “16” ) );
 }
}

• Create a second source code window, type in the following HTML, save as GridLayout.html, and add it to the project as well.

<title>GridLayout</title>
<hr>
<applet codebase=”GridLayout Files” code=”MyGrid.class” width=200 height=200>
</applet>
<hr>
<a href=”GridLayout.java”>The source.</a>

• Remove the two <replace me> files from the project (Apple-click on the files to select them, then hit option-delete).

• Edit the project prefs, specifically, the Java Project pane. Set the Project Type popup to “Class Folder” and type “GridLayout Files” (without the quotes) as the Folder Name.

It’s important that the Class Folder preference exactly match the “codebase” attribute in your HTML file.

• Once all your source is in place, select Make from the Project menu to generate your class file.

• To run your applet, drop the html file onto your Java Applet runner or Java-capable browser. Figure 1 shows my version running in a Netscape window.

Figure 1. The GridLayout applet, running in Netscape.

The GridLayout Source Code

Here’s how the source code works. First comes the normal opening stuff, the import statement and class definition. The setLayout() statement creates a new GridLayout object with 4 rows and 4 columns, and makes it the current layout.

import java.awt.*;

public class MyGrid extends java.applet.Applet
{
 public MyGrid()
 {
 setLayout( new GridLayout( 4, 4 ) );

Next, we create a series of 16 buttons and add them to the current frame.

 add( new Button( “1” ) );
 add( new Button( “2” ) );
 add( new Button( “3” ) );
 add( new Button( “4” ) );
 add( new Button( “5” ) );
 add( new Button( “6” ) );
 add( new Button( “7” ) );
 add( new Button( “8” ) );
 add( new Button( “9” ) );
 add( new Button( “10” ) );
 add( new Button( “11” ) );
 add( new Button( “12” ) );
 add( new Button( “13” ) );
 add( new Button( “14” ) );
 add( new Button( “15” ) );
 add( new Button( “16” ) );
 }
}

That’s it! When you run the applet, your 16 buttons will appear in a 4 by 4 grid. The width and height of the buttons is determined by the width and height attributes in your HTML’s applet tag. Make the applet frame wider, the buttons will each be made wider. Make the frame taller, the buttons will each be made taller.

You can also affect the results by changing the parameters you pass to the GridLayout constructor. Experiment.

GridLayout, Version 2

Here’s another GridLayout applet. This one uses all four constructor parameters, and includes a nifty little trick you’ll want to remember. First, here’s the code:

import java.awt.*;

public class MyGrid extends java.applet.Applet
{
 int    numButtons;
 String att;
 
 public void init()
 {
 att = getParameter( “NUMBUTTONS” );
 numButtons = Integer.valueOf(att).intValue();
 
 setLayout( new GridLayout( 2, 20, 5, 20 ) );
 
 for ( int i=1; i<=numButtons; i++ )
 add( new Button( “”+i ) );
 }
}

Next, here’s the HTML:

<title>GridLayout</title>
<hr>
<applet codebase=”GridLayout Files” code=”MyGrid.class” width=400 height=200>
<param name=”NUMBUTTONS” value=”16”>
</applet>
<hr>
<a href=”GridLayout.java”>The source.</a>

Figure 2 shows the applet in action, running under Netscape. Let’s take a look at this source.

Figure 2. Another GridLayout applet using all 4 parameters.

GridLayout 2 Source Code

This version of GridLayout.Java starts off in the same way, but does its creating in init() instead of in MyGrid(). This gives us access to the HTML parameters. I’m not sure why getParameter() doesn’t work from within MyGrid(), but I’ll look into it.

import java.awt.*;

public class MyGrid extends java.applet.Applet
{
 int    numButtons;
 String att;

If you look back at the HTML, you’ll see that we stuck in a parameter with the name “NUMBUTTONS” and a value of “16”. We call getParameter() to pick up the parameter and Integer.valueOf(att).intValue() to convert the returned string to a number. Next, we create a new GridLayout using all 4 parameters and make it the current layout. Note that we’ve specified 2 rows and 20 columns, with 5 pixels horizontally and 20 pixels vertically between components. The Layout Manager uses the row value first for GridLayouts, so the fact that you’ve specified 20 columns really has no affect. Try using 0 for a column value.

 public void init()
 {
 att = getParameter( “NUMBUTTONS” );
 numButtons = Integer.valueOf(att).intValue();
 
 setLayout( new GridLayout( 2, 20, 5, 20 ) );

Now for the cool trick. In our earlier example, we explicitly specified the name of each button using Strings like “1”, “2”, etc. In this case, we add the loop counter, i, to the null string to produce a string representation of the loop counter. Basically, we’ve forced Java to do the typecasting from number to String for us, since the + operator is expecting a String on both sides. Pretty cool, eh?

 for ( int i=1; i<=numButtons; i++ )
 add( new Button( “”+i ) );
 }
}

The GridBagLayout

The GridLayout works pretty well if all your components are the same size. But, suppose you are working with all sorts of elements; some tall, some wide, whatever. In this case, the GridLayout won’t work particularly well (it’ll waste a lot of screen real estate). Fortunately, there is a complex, grid-based class designed to handle variable sized components.

GridBagLayout and its sister class, GridBagConstraints, allow you to customize a layout that allows components to span multiple grid cells. The GridBagConstraints class features a number of variables, each designed to constrain any components added to the current GridBagLayout. Take a look at the GridBagConstraints class declaration:

public  class  Java.awt.GridBagConstraints
    extends  Java.lang.Object
    implements Java.lang.Cloneable
{
        // Fields
    public int anchor;
    public int fill;
    public int gridheight;
    public int gridwidth;
    public int gridx;
    public int gridy;
    public Insets insets;
    public int ipadx;
    public int ipady;
    public double weightx;
    public double weighty;

        // the anchor field has one of the following values     
    public final static int CENTER;
    public final static int EAST;
    public final static int NORTH;
    public final static int NORTHEAST;
    public final static int NORTHWEST;
    public final static int SOUTH;
    public final static int SOUTHEAST;
    public final static int SOUTHWEST;
    public final static int WEST;

        // the fill field has one of the following values       
    public final static int BOTH;
    public final static int HORIZONTAL;
    public final static int NONE;
    public final static int VERTICAL;

        // default value for gridheight, gridwidth
    public final static int REMAINDER;

        // default value for gridx, gridy
    public final static int RELATIVE;

        // Constructors
    public GridBagConstraints();

        // Methods
    public Object clone();
}

To use a GridBagLayout, you’ll create a GridBagLayout object along with a corresponding GridBagConstraints object, then make the GridBagLayout the current object. Next, you’ll set your GridBagConstraints fields to the settings you prefer. Now you are ready to start adding components to the current frame. All the added components will be formatted according to the current GridBagConstraints settings. Change the constraints settings and add some more components. The changed constraints only affect future components, not the components that were already added.

anchor determines where, within a cell, the component is placed. fill determines if the component is reissued to fill its cell and, if so, how. gridheight specifies the number of cells in a column. gridwidth specifies the number of cells in a row. REMAINDER is used to mark a component as the last in its row or column. RELATIVE is used to mark a component as next to last.

gridx and gridy allow you to specify where to place the component in the grid. A value of (0,0) will put the next component in the upper left corner. A value of RELATIVE will put the component either at the end of a row (in the case of gridx) or column (in the case of gridy).

insets specifies the number of pixels of padding on any side of a cell. ipadx and ipady allow you to specify the padding in pixels within a cell.

Finally, weightx and weighty allow you to specify how much horizontal and vertical space this component should consume when the available extra display area is divvied up between all the components in a row or column.

A GridBagLayout Example

There is really no way to truly appreciate the GridBagLayout without playing with an example. The following is one of the standard Sun applets, stripped down to make it as small as possible. Take some time to play with this applet. Change the constraints, experiment with all the fields and settings to see what they do.

Here’s the source code:

import java.awt.*;

public class MyGridBag extends java.applet.Applet
{
 public MyGridBag()
 {
 GridBagLayout   gridBag = new GridBagLayout();
 GridBagConstraintsconstraints =
                new GridBagConstraints();
 
 setLayout( gridBag );
 
 constraints.fill  =  constraints.BOTH;
 constraints.weightx  =  1.0;

 ConstrainedButton(“Button1”,  gridBag,  constraints );
 ConstrainedButton(“Button2”,  gridBag,  constraints );
 ConstrainedButton(“Button3”,  gridBag,  constraints );

 constraints.gridwidth  =  constraints.REMAINDER;  

 ConstrainedButton(“Button4”,  gridBag,  constraints );

 constraints.weightx  =  0.0;

 ConstrainedButton(“Button5”,  gridBag,  constraints );
 
 constraints.gridwidth  =  constraints.RELATIVE;
 
 ConstrainedButton(“Button6”,  gridBag,  constraints );
 
 constraints.gridwidth  =  constraints.REMAINDER;
 
 ConstrainedButton(“Button7”,  gridBag,  constraints );
 
 constraints.gridwidth  =  1;
 constraints.gridheight  =  2;
 constraints.weighty  =  1.0;
 
 ConstrainedButton(“Button8”,  gridBag,  constraints );
 
 constraints.weighty  =  0.0;
 constraints.gridwidth  =  constraints.REMAINDER;  
 constraints.gridheight  =  1;
 
 ConstrainedButton(“Button9”,  gridBag,  constraints );
 ConstrainedButton(“Button10”,  gridBag,  constraints );
 }
 
 void ConstrainedButton( String title,
 GridBagLayout layout, GridBagConstraints constraints )
 {
 Button button = new Button( title );
 layout.setConstraints( button, constraints );
 add( button );
 }
}

Here’s the HTML:

<title>GridBagLayout</title>
<hr>
<applet codebase=”GridBagLayout Files” code=”MyGridBag.class” width=400 
height=100>
</applet>
<hr>
<a href=”GridBagLayout.java”>The source.</a>

Figure 3 shows the results of this applet, when run in Netscape.

Figure 3. The classic GridBagLayout applet from Sun.

Till Next Month...

As you go through the GridBagLayout source, pay attention to the use of REMAINDER and RELATIVE. Remember, you are marking a component as 2nd to last and last in its row or column. For example, Button4 should be the last in its row. Button6 should be RELATIVE (2nd to last) while Button7 should be REMAINDER (last). All the buttons should use a gridheight of 1 except for Button8, which will use a gridheight of 2. You get the idea.

Next month, we’ll take a look at double-buffered animation, something that Java makes fairly easy to do. Till then, have a Happy Thanksgiving and save me a wishbone...

 

Community Search:
MacTech Search:

Software Updates via MacUpdate

Latest Forum Discussions

See All

Whitethorn Games combines two completely...
If you have ever gone fishing then you know that it is a lesson in patience, sitting around waiting for a bite that may never come. Well, that's because you have been doing it wrong, since as Whitehorn Games now demonstrates in new release Skate... | Read more »
Call of Duty Warzone is a Waiting Simula...
It's always fun when a splashy multiplayer game comes to mobile because they are few and far between, so I was excited to see the notification about Call of Duty: Warzone Mobile (finally) launching last week and wanted to try it out. As someone who... | Read more »
Albion Online introduces some massive ne...
Sandbox Interactive has announced an upcoming update to its flagship MMORPG Albion Online, containing massive updates to its existing guild Vs guild systems. Someone clearly rewatched the Helms Deep battle in Lord of the Rings and spent the next... | Read more »
Chucklefish announces launch date of the...
Chucklefish, the indie London-based team we probably all know from developing Terraria or their stint publishing Stardew Valley, has revealed the mobile release date for roguelike deck-builder Wildfrost. Developed by Gaziter and Deadpan Games, the... | Read more »
Netmarble opens pre-registration for act...
It has been close to three years since Netmarble announced they would be adapting the smash series Solo Leveling into a video game, and at last, they have announced the opening of pre-orders for Solo Leveling: Arise. [Read more] | Read more »
PUBG Mobile celebrates sixth anniversary...
For the past six years, PUBG Mobile has been one of the most popular shooters you can play in the palm of your hand, and Krafton is celebrating this milestone and many years of ups by teaming up with hit music man JVKE to create a special song for... | Read more »
ASTRA: Knights of Veda refuse to pump th...
In perhaps the most recent example of being incredibly eager, ASTRA: Knights of Veda has dropped its second collaboration with South Korean boyband Seventeen, named so as it consists of exactly thirteen members and a video collaboration with Lee... | Read more »
Collect all your cats and caterpillars a...
If you are growing tired of trying to build a town with your phone by using it as a tiny, ineffectual shover then fear no longer, as Independent Arts Software has announced the upcoming release of Construction Simulator 4, from the critically... | Read more »
Backbone complete its lineup of 2nd Gene...
With all the ports of big AAA games that have been coming to mobile, it is becoming more convenient than ever to own a good controller, and to help with this Backbone has announced the completion of their 2nd generation product lineup with their... | Read more »
Zenless Zone Zero opens entries for its...
miHoYo, aka HoYoverse, has become such a big name in mobile gaming that it's hard to believe that arguably their flagship title, Genshin Impact, is only three and a half years old. Now, they continue the road to the next title in their world, with... | Read more »

Price Scanner via MacPrices.net

B&H has Apple’s 13-inch M2 MacBook Airs o...
B&H Photo has 13″ MacBook Airs with M2 CPUs and 256GB of storage in stock and on sale for up to $150 off Apple’s new MSRP, starting at only $849. Free 1-2 day delivery is available to most US... Read more
M2 Mac minis on sale for $100-$200 off MSRP,...
B&H Photo has Apple’s M2-powered Mac minis back in stock and on sale today for $100-$200 off MSRP. Free 1-2 day shipping is available for most US addresses: – Mac mini M2/256GB SSD: $499, save $... Read more
Mac Studios with M2 Max and M2 Ultra CPUs on...
B&H Photo has standard-configuration Mac Studios with Apple’s M2 Max & Ultra CPUs in stock today and on Easter sale for $200 off MSRP. Their prices are the lowest available for these models... Read more
Deal Alert! B&H Photo has Apple’s 14-inch...
B&H Photo has new Gray and Black 14″ M3, M3 Pro, and M3 Max MacBook Pros on sale for $200-$300 off MSRP, starting at only $1399. B&H offers free 1-2 day delivery to most US addresses: – 14″ 8... Read more
Department Of Justice Sets Sights On Apple In...
NEWS – The ball has finally dropped on the big Apple. The ball (metaphorically speaking) — an antitrust lawsuit filed in the U.S. on March 21 by the Department of Justice (DOJ) — came down following... Read more
New 13-inch M3 MacBook Air on sale for $999,...
Amazon has Apple’s new 13″ M3 MacBook Air on sale for $100 off MSRP for the first time, now just $999 shipped. Shipping is free: – 13″ MacBook Air (8GB RAM/256GB SSD/Space Gray): $999 $100 off MSRP... Read more
Amazon has Apple’s 9th-generation WiFi iPads...
Amazon has Apple’s 9th generation 10.2″ WiFi iPads on sale for $80-$100 off MSRP, starting only $249. Their prices are the lowest available for new iPads anywhere: – 10″ 64GB WiFi iPad (Space Gray or... Read more
Discounted 14-inch M3 MacBook Pros with 16GB...
Apple retailer Expercom has 14″ MacBook Pros with M3 CPUs and 16GB of standard memory discounted by up to $120 off Apple’s MSRP: – 14″ M3 MacBook Pro (16GB RAM/256GB SSD): $1691.06 $108 off MSRP – 14... Read more
Clearance 15-inch M2 MacBook Airs on sale for...
B&H Photo has Apple’s 15″ MacBook Airs with M2 CPUs (8GB RAM/256GB SSD) in stock today and on clearance sale for $999 in all four colors. Free 1-2 delivery is available to most US addresses.... Read more
Clearance 13-inch M1 MacBook Airs drop to onl...
B&H has Apple’s base 13″ M1 MacBook Air (Space Gray, Silver, & Gold) in stock and on clearance sale today for $300 off MSRP, only $699. Free 1-2 day shipping is available to most addresses in... Read more

Jobs Board

Medical Assistant - Surgical Oncology- *Apple...
Medical Assistant - Surgical Oncology- Apple Hill Location: WellSpan Medical Group, York, PA Schedule: Full Time Sign-On Bonus Eligible Remote/Hybrid Regular Apply Read more
Omnichannel Associate - *Apple* Blossom Mal...
Omnichannel Associate - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Read more
Cashier - *Apple* Blossom Mall - JCPenney (...
Cashier - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Blossom Mall Read more
Operations Associate - *Apple* Blossom Mall...
Operations Associate - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Read more
Business Analyst | *Apple* Pay - Banco Popu...
Business Analyst | Apple PayApply now " Apply now + Apply Now + Start applying with LinkedIn Start + Please wait Date:Mar 19, 2024 Location: San Juan-Cupey, PR Read more
All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.