TweetFollow Us on Twitter

Mar 96 Tips
Volume Number:12
Issue Number:3
Column Tag:Tips & Tidbits

Tips & Tidbits

By Steve Sisak, Contributing Editor

Note: Source code files accompanying article are located on MacTech CD-ROM or source code disks.

Calling PowerPC Code
From 68K Code

There is a lot of information out there about calling 68K code from PowerPC code, but there is very little about calling PowerPC code from 68K code.

Here is a nice method for calling PowerPC code from 68K code. I am using CodeWarrior 7. This is a bit lengthy so hang in there:

There are three steps required to get things up and running. Let’s look at a sample scenario:

You have a 68K application that you just can’t convert to PowerPC code (I don’t know why you can’t convert it, but just bear with me), but you can take some of the time-critical code and convert it to a PowerPC shared library and call it from the 68K code.

Suppose you have two functions that perform data compression:

long  CompressData(  unsigned char *inBuffer, 
 unsigned char *outBuffer,
 unsigned long inBufferSize );
   
long  UncompressData(unsigned char *inBuffer, 
 unsigned char *outBuffer, 
 unsigned long inBufferSize );

Step 1 - Create a PPC shared library containing your functions.

We are going to export these functions using the #pragma export directive. This is set in the PPC Prefs area of Codewarrior preferences.

“the shared library”
// Prototypes

#pragma export on

#ifdef __cplusplus
extern "C" {
#endif

long  CompressData(  unsigned char *inBuffer, 
 unsigned char *outBuffer, 
 unsigned long inBufferSize );
   
long  UncompressData(   unsigned char *inBuffer,
 unsigned char *outBuffer,
 unsigned long inBufferSize );

#ifdef __cplusplus
}
#endif

#pragma export off
// CompressData

long  CompressData( unsigned char *inBuffer, unsigned char 
   *outBuffer, unsigned long inBufferSize )
{
    ... compress data code
}

// UncompressData
   
long  UncompressData( unsigned char *inBuffer, unsigned char 
     *outBuffer, unsigned long inBufferSize )
{
    ... uncompress data code
}

Set the project type to a shared library and build the project. We now have a PowerPC shared library that we will use in Step 2.


Step 2 - Create a resource-based PEF Fragment that references our shared library.

We create a header file that defines some mixed mode information.

“the header file”
#ifdef __cplusplus
extern "C" {
#endif

typedef long (*CompressDataProcPtr)( unsigned char *inBuffer, 
 unsigned char *outBuffer, unsigned long inBufferSize );
typedef long (*UncompressDataProcPtr)( unsigned char *inBuffer, 
 unsigned char *outBuffer, unsigned long inBufferSize);

#if GENERATINGCFM || USESROUTINEDESCRIPTORS

typedef UniversalProcPtr CompressDataUPP;
typedef UniversalProcPtr UncompressDataUPP;

enum {
 uppCompressDataProcInfo = kCStackBased
 | RESULT_SIZE( SIZE_CODE( sizeof( long ) ) )
 | STACK_ROUTINE_PARAMETER( 1, SIZE_CODE( 
 sizeof( unsigned char *) ) )
 | STACK_ROUTINE_PARAMETER( 2, SIZE_CODE( 
 sizeof( unsigned char *) ) ) | STACK_ROUTINE_PARAMETER( 3, SIZE_CODE( 

 sizeof( long ) ) )
};

enum {
 uppUncompressDataProcInfo = kCStackBased
 | RESULT_SIZE( SIZE_CODE( sizeof( long ) ) )
 | STACK_ROUTINE_PARAMETER( 1, SIZE_CODE( 
 sizeof( unsigned char *) ) )
 | STACK_ROUTINE_PARAMETER( 2, SIZE_CODE( 
 sizeof( unsigned char *) ) )
 | STACK_ROUTINE_PARAMETER( 3, SIZE_CODE( 
 sizeof( long ) ) )
};

#else

typedef CompressDataProcPtr CompressDataUPP;
typedef UncompressDataProcPtr UncompressDataUPP;
#endif

//============================================================
// Extern Globals
//

#ifndef powerc

extern CompressDataUPP    myCompressDataUPP;
extern UncompressDataUPP  myUncompressDataUPP;

#endif

//============================================================
// Macros
//

#if GENERATINGPOWERPC || defined(powerc) || defined (__powerc)

#define myCompressData( a, b, c )  CompressData( a, b, c )
#define myUncompressData( a, b, c )UncompressData( a, b, c )

#else

#define myCompressData( a, b, c ) \  
 (*(CompressDataUPP)myCompressDataUPP( a, b, c )
#define myUncompressData( a, b, c  ) \
 (*(CompressDataUPP)myUncompressDataUPP( a, b, c )

#endif

//============================================================
// Prototypes
//

long CompressData( unsigned char *inBuffer, unsigned char 
    *outBuffer, unsigned long inBufferSize );
long UncompressData( unsigned char *inBuffer, unsigned char 
  *outBuffer, unsigned long inBufferSize );

#ifdef __cplusplus
}
#endif

Now we define the source file:

“the source file”
#include "the header file"

#ifdef __cplusplus
extern "C" {
#endif

#if GENERATINGPOWERPC || defined(powerc) || defined (__powerc)
#pragma options align=mac68k
#endif

#ifdef __CFM68K__
#pragma lib_export on
#endif

RoutineDescriptorCompressDataRD = 
 BUILD_ROUTINE_DESCRIPTOR(  uppCompressDataProcInfo, 
 CompressData );

RoutineDescriptorUncompressDataRD = 
 BUILD_ROUTINE_DESCRIPTOR(  uppUncompressDataProcInfo, 
 UncompressData );


#ifdef __CFM68K__
#pragma lib_export off
#endif

#if GENERATINGPOWERPC || defined(powerc) || defined (__powerc)
#pragma options align=reset
#endif

#ifdef __cplusplus
}
#endif

Add the shared library we built in Step 1 to this project.

Set the project type to shared library and build the project. We now have a PowerPC shared library that we want to convert to a resource. (Note: we don’t export this as a PowerPC code resource with no header, since we would get link errors for an undefined main entry.)

Open the file up in a resource editor and create a new resource (I use a type of 'PEF ', but any will do). Move the PEF code from the data fork into this resource. (If your resource editor will not do this, then it is a simple matter of creating a small application that will do this for you; this excercise is left for the reader.)

We now have a resource file that we will add to our 68K project.


Step 3 - Add 68K support code to your project

Your 68K project needs to have a bit of support code to get the code resource and load it in as a code fragment. Add to your code:

#include "the header file"

We need to declare some globals for the universal procs that will store the address of the routine descriptors. Add to your code:

#ifndef powerc
CompressDataUPP  myCompressDataUPP;
UncompressDataUPPmyUncompressDataUPP;
#endif

The following function takes care of checking for the existence of the CFM and Mixed Mode managers. We pass it a pointer to a CFragConnectionID variable and a Handle variable, which we will use later on for clean up. Add to your code:

#ifndef powerc

// SetupPPCNativeCode

OSErr SetupPPCNativeCode( CFragConnectionID *connID, 
 Handle *PEFHandle,
   ResType codeFragmentType, 
 short codeFragmentID )
{
 OSErr  theErr = noErr;
 long   templong;
 Str255 failedFragName;
 

    // get PEF container resource from our resource fork
 
 *PEFHandle = ::Get1Resource( codeFragmentType, codeFragmentID );
 theErr = ::ResError();
 if( !(*PEFHandle) )
 {
 if( theErr )  
 return( theErr );
 else
 return( ::MemError() );
 }
 
    // Check for Mixed Mode Manager and Code Fragment Manager (CFM)
 
 Boolean  hasMixedMode = !Gestalt( gestaltMixedModeAttr, 
 &templong );
 Boolean  hasCFM = !Gestalt( gestaltCFMAttr, &templong );
 
 theErr = Gestalt( gestaltSysArchitecture, &templong );
 if( ( theErr ) || 
 ( templong == gestalt68k ) ||
 ( !hasCFM ) ||
 ( !hasMixedMode ) )
 {
 ::ReleaseResource( *PEFHandle );
 return( -1 );
 }
 
 DetachResource( *PEFHandle );
 MoveHHi( *PEFHandle );
 HLock( *PEFHandle );
 
    // Assume this is PowerPC code, so it must be “prepared”
 
 theErr = ::GetMemFragment( (Ptr)**PEFHandle, 0, 0,            
 kNewCFragCopy, connID, 0, failedFragName );
 if( theErr )
 {
 DisposeHandle( *PEFHandle );
 return( theErr );
 }

 CFragSymbolClassmyClass;
 
 if( !theErr )
 theErr = ::FindSymbol( *connID, 
    (ConstStr255Param)"\pCompressDataRD", 
    (Ptr*)&myCompressDataUPP, 
    &myClass );
 if( !theErr )
 theErr = ::FindSymbol( *connID, 
    (ConstStr255Param)"\pUncompressDataRD", 
    (Ptr*)&myUncompressDataUPP, 
    &myClass );

 if( theErr )
 {
 DisposeHandle( *PEFHandle );
 return( theErr );
 }
 
 return( noErr );
}

The following function takes the connection id and handle returned from SetupPPCNativeCode, frees the connection and disposes of the handle. Add to your code:

// TearDownPPCNativeCode

void TearDownPPCNativeCode( CFragConnectionID connID, Handle PEFHandle 
)
{
 ::CloseConnection( &connID );
 if( PEFHandle )
 ::DisposeHandle( PEFHandle );
}

#endif

Build your 68K project as you normally would and be sure to include the resource file we created in Step 2 and ensure the the shared library we created in Step 1 is either in the Extensions folder of the System Folder or in the same directory as the application.

Here is what you would do the call the PowerPC code from 68K:

long PowerPC_Compress( unsigned char *inBuffer, unsigned char 
    *outBuffer, unsigned long inBufferSize )
{
 #ifndef powerc
 
    // For efficiency you would probably put this call in initialization code.
    // sConnID and sPEFHandle are static globals.
 
 OSErr err = SetupPPCNativeCode( &sConnID, &sPEFHandle, 
 'PEF ', 128 );
 if( err )
 return( 0 );  // We couldn’t compress anything so return 0
 #endif
 
 long   result = 0;
 
 result = myCompressData( inBuffer, outBuffer, inBufferSize );
 
 #ifndef powerc
 
    // For efficiency you would probably put this call in termination code.
 
 TearDownPPCNativeCode( sConnID, sPEFHandle );
 #endif
}

long PowerPC_Uncompress( unsigned char *inBuffer, 
 unsigned char *outBuffer, unsigned long inBufferSize )
{
 #ifndef powerc
 
    // For efficiency you would probably put this call in initialization code.
    // sConnID and sPEFHandle are static globals.
 
 OSErr err = SetupPPCNativeCode( &sConnID, &sPEFHandle, 
 'PEF ', 128 );
 if( err )
 return( 0 );  // We couldn’t compress anything so return 0
 #endif
 
 long   result = 0;
 
 result = myUncompressData( inBuffer, outBuffer, inBufferSize );
 
 #ifndef powerc
 
    // For efficiency you would probably put this call in termination code.
 
 TearDownPPCNativeCode( sConnID, sPEFHandle );
 #endif
}


That’s all there is to it. Enjoy and happy coding.

- Chris Rudolph

[BuildRoutineDescriptor() doesn’t work right with CFM68k; use NewRoutineDescriptor() instead. BuildRoutineDescriptor() generates code so you need to call MakeDataExecutable() after it. - sgs]

 

Community Search:
MacTech Search:

Software Updates via MacUpdate

Latest Forum Discussions

See All

Whitethorn Games combines two completely...
If you have ever gone fishing then you know that it is a lesson in patience, sitting around waiting for a bite that may never come. Well, that's because you have been doing it wrong, since as Whitehorn Games now demonstrates in new release Skate... | Read more »
Call of Duty Warzone is a Waiting Simula...
It's always fun when a splashy multiplayer game comes to mobile because they are few and far between, so I was excited to see the notification about Call of Duty: Warzone Mobile (finally) launching last week and wanted to try it out. As someone who... | Read more »
Albion Online introduces some massive ne...
Sandbox Interactive has announced an upcoming update to its flagship MMORPG Albion Online, containing massive updates to its existing guild Vs guild systems. Someone clearly rewatched the Helms Deep battle in Lord of the Rings and spent the next... | Read more »
Chucklefish announces launch date of the...
Chucklefish, the indie London-based team we probably all know from developing Terraria or their stint publishing Stardew Valley, has revealed the mobile release date for roguelike deck-builder Wildfrost. Developed by Gaziter and Deadpan Games, the... | Read more »
Netmarble opens pre-registration for act...
It has been close to three years since Netmarble announced they would be adapting the smash series Solo Leveling into a video game, and at last, they have announced the opening of pre-orders for Solo Leveling: Arise. [Read more] | Read more »
PUBG Mobile celebrates sixth anniversary...
For the past six years, PUBG Mobile has been one of the most popular shooters you can play in the palm of your hand, and Krafton is celebrating this milestone and many years of ups by teaming up with hit music man JVKE to create a special song for... | Read more »
ASTRA: Knights of Veda refuse to pump th...
In perhaps the most recent example of being incredibly eager, ASTRA: Knights of Veda has dropped its second collaboration with South Korean boyband Seventeen, named so as it consists of exactly thirteen members and a video collaboration with Lee... | Read more »
Collect all your cats and caterpillars a...
If you are growing tired of trying to build a town with your phone by using it as a tiny, ineffectual shover then fear no longer, as Independent Arts Software has announced the upcoming release of Construction Simulator 4, from the critically... | Read more »
Backbone complete its lineup of 2nd Gene...
With all the ports of big AAA games that have been coming to mobile, it is becoming more convenient than ever to own a good controller, and to help with this Backbone has announced the completion of their 2nd generation product lineup with their... | Read more »
Zenless Zone Zero opens entries for its...
miHoYo, aka HoYoverse, has become such a big name in mobile gaming that it's hard to believe that arguably their flagship title, Genshin Impact, is only three and a half years old. Now, they continue the road to the next title in their world, with... | Read more »

Price Scanner via MacPrices.net

B&H has Apple’s 13-inch M2 MacBook Airs o...
B&H Photo has 13″ MacBook Airs with M2 CPUs and 256GB of storage in stock and on sale for up to $150 off Apple’s new MSRP, starting at only $849. Free 1-2 day delivery is available to most US... Read more
M2 Mac minis on sale for $100-$200 off MSRP,...
B&H Photo has Apple’s M2-powered Mac minis back in stock and on sale today for $100-$200 off MSRP. Free 1-2 day shipping is available for most US addresses: – Mac mini M2/256GB SSD: $499, save $... Read more
Mac Studios with M2 Max and M2 Ultra CPUs on...
B&H Photo has standard-configuration Mac Studios with Apple’s M2 Max & Ultra CPUs in stock today and on Easter sale for $200 off MSRP. Their prices are the lowest available for these models... Read more
Deal Alert! B&H Photo has Apple’s 14-inch...
B&H Photo has new Gray and Black 14″ M3, M3 Pro, and M3 Max MacBook Pros on sale for $200-$300 off MSRP, starting at only $1399. B&H offers free 1-2 day delivery to most US addresses: – 14″ 8... Read more
Department Of Justice Sets Sights On Apple In...
NEWS – The ball has finally dropped on the big Apple. The ball (metaphorically speaking) — an antitrust lawsuit filed in the U.S. on March 21 by the Department of Justice (DOJ) — came down following... Read more
New 13-inch M3 MacBook Air on sale for $999,...
Amazon has Apple’s new 13″ M3 MacBook Air on sale for $100 off MSRP for the first time, now just $999 shipped. Shipping is free: – 13″ MacBook Air (8GB RAM/256GB SSD/Space Gray): $999 $100 off MSRP... Read more
Amazon has Apple’s 9th-generation WiFi iPads...
Amazon has Apple’s 9th generation 10.2″ WiFi iPads on sale for $80-$100 off MSRP, starting only $249. Their prices are the lowest available for new iPads anywhere: – 10″ 64GB WiFi iPad (Space Gray or... Read more
Discounted 14-inch M3 MacBook Pros with 16GB...
Apple retailer Expercom has 14″ MacBook Pros with M3 CPUs and 16GB of standard memory discounted by up to $120 off Apple’s MSRP: – 14″ M3 MacBook Pro (16GB RAM/256GB SSD): $1691.06 $108 off MSRP – 14... Read more
Clearance 15-inch M2 MacBook Airs on sale for...
B&H Photo has Apple’s 15″ MacBook Airs with M2 CPUs (8GB RAM/256GB SSD) in stock today and on clearance sale for $999 in all four colors. Free 1-2 delivery is available to most US addresses.... Read more
Clearance 13-inch M1 MacBook Airs drop to onl...
B&H has Apple’s base 13″ M1 MacBook Air (Space Gray, Silver, & Gold) in stock and on clearance sale today for $300 off MSRP, only $699. Free 1-2 day shipping is available to most addresses in... Read more

Jobs Board

Senior Product Associate - *Apple* Pay (AME...
…is seeking a Senior Associate of Digital Product Management to support our Apple Pay product team. Labs drives innovation at American Express by originating, Read more
Medical Assistant - Surgical Oncology- *Apple...
Medical Assistant - Surgical Oncology- Apple Hill Location: WellSpan Medical Group, York, PA Schedule: Full Time Sign-On Bonus Eligible Remote/Hybrid Regular Apply Read more
Omnichannel Associate - *Apple* Blossom Mal...
Omnichannel Associate - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Read more
Cashier - *Apple* Blossom Mall - JCPenney (...
Cashier - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Blossom Mall Read more
Operations Associate - *Apple* Blossom Mall...
Operations Associate - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Read more
All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.