TweetFollow Us on Twitter

Sprocket Menus 1
Volume Number:11
Issue Number:5
Column Tag:Getting Started

Sprocket Menus, Part 1

By Dave Mark, MacTech Magazine Regular Contributing Author

Note: Source code files accompanying article are located on MacTech CD-ROM or source code disks.

My February ’93 Getting Started column featured a program called MenuMaster. MenuMaster constructed a menu bar consisting of four menus: The traditional Apple, File, and Edit menus, as well as a special Options menu (Figure 1). Selecting the first item changes it from Change My Name to Change Me Back Again. Selecting the first item again changes it back to Change My Name.

Selecting Disable Me disables the second item and enables the third item. If you then select the newly enabled Enable Previous Item, it gets disabled and Disable Me is reenabled.

If you select Add Extra Menu, a new menu is inserted in the menu bar and Add Extra Menu is disabled. The new menu, titled Extra Menu, features a single item, Delete Me. Selecting Delete Me deletes the extra menu from the menu bar and reenables Add Extra Menu.

Finally, selecting Append Item adds an extra item (Can’t Delete Me...) to the end of the menu. As its names implies, there’s no way to delete this extra item.

Fig. 1. MenuMaster’s Options menu.

A Sprocket Version of MenuMaster

This month we’re going to use Sprocket to implement most of MenuMaster’s functionality. We’ll skip the ability to append an item to the end of a menu for two reasons. First, appending a single item to the end of a menu just isn’t done that often and isn’t particularly useful. More importantly (and probably for the same reason), Sprocket doesn’t give you an easy way to append a new item to a menu.

If you come up with a good reason to add this functionality to Sprocket (or if you have any comments or bugs to report), send e-mail to sprocket@hax.com.

As I mentioned last month, Sprocket based its menu-handling model on that used by OpenDoc. At the heart of this model is a replacement for the MENU resource type. A CMNU resource is just like a MENU resource, with one important addition. Each menu item features a command number. You’ll use this command number to refer to the item, instead of the more traditional method of specifying the menu the item belongs to, along with the item’s position in the menu (e.g., menu 129, item 4).

Figure 2. The CMNU resource, featuring a Cmd-Num field for each menu item.

Check out the ResEdit snapshot in Figure 2. It shows the CMNU resource that represents our new Options menu. The first menu item, Change My Name, is selected. The command number for this item is 1000. When the user selects this item, Sprocket will pass the associated command number (in this case, 1000) as a parameter to the routine HandleMenuCommand() (it’s in the file SprocketStarter.cp). Instead of creating a separate item dispatch routine for each menu (HandleAppleMenu(), HandleFileMenu(), etc.), you’ll create a single switch statement containing cases for all your commands.

Sprocket automatically creates a menu bar at application startup. In C++ terms, Sprocket constructs a TMenuBar object, which is implemented in the files TMenuBar.cp and TMenuBar.h. Here’s the TMenuBar class definition:

class TMenuBar
 {
public:
Resource ('MBAR' and 'CMNU') Utilities
 
 OSErr  GetNewMenuBar(short whichMBAR);
 MenuRefGetMenuFromCMNU(short whichMenu);
Menu command mapping functions

 MenuCommandID   GetCommand(MenuID menu, MenuItemID item);
 void   GetMenuAndItem(MenuCommandID commandNum, 
 MenuID * returnedMenu, MenuItemID * returnedItem);
 OSErr  RegisterCommand(  MenuCommandID commandNum, 
   MenuID menu, MenuItemID item);
 OSErr  UnregisterCommand(MenuCommandID commandNum);
Menu enable/disable routines for menu items

 void   EnableCommand(MenuCommandID commandNum, 
 Boolean enable);
 void   EnableAndCheckCommand(MenuCommandID commandNum, 
 Boolean enable, Boolean check);
 void   GetItemString(MenuCommandID commandNum,
 StringPtr itemString);
 void   SetItemString(MenuCommandID commandNum,
 StringPtr itemString);
helpful utility functions
 void   HideMenuBar();
 void   ShowMenuBar();
 void   RedrawIfNeeded();
 void   Invalidate();
 void   Validate();

private:
"globals"
 static Boolean  fgMenuBarNeedsRedraw;
 static Boolean  fgMenuBarHidden;
mapping tables
 TMenuCommandTable fCommandTable;
 TMenuItemTable  fMenuItemTable;
internal methods
 MenuHandle GetMenuHandleAndItemFromCommand(
 MenuCommandID commandNum, 
 MenuID *menu,MenuItemID *item);
 };

The first member function, GetNewMenuBar() uses the specified MBAR resource to build a new menu bar. Though this version of Sprocket only creates a single menu bar, this might not be the case in the future. For now, a pointer to the menu bar object is stored in the global gMenuBar. Take a minute to open up the file SprocketMain.cp and check out the code around line 363. This is where Sprocket creates the TMenuBar object based on the MBAR resource in SprocketStarter.rsrc.

The member function GetMenuFromCMNU() loads a CMNU resource and walks through it, one item at a time. It builds a traditional menu structure, passing each item’s command number to the RegisterCommand() member function, which adds the command to Sprocket’s menu command table. If you are going to take advantage of Sprocket’s menu command mechanism, you must register your menu item commands. If you base your menus on a CMNU resource, GetMenuFromCMNU() will register your menu items automatically. If the menus in your MBAR resource correspond to a CMNU resource, Sprocket will register the menu items automatically.

If you don’t want to use a CMNU resource, you can still add and delete your menus to and from the global menu bar yourself. For example, since a font or size menu will have a dynamic number of items, the CMNU resource just doesn’t make sense. We’ll look at that process in a future column.

The member function GetCommand() takes a menu and item ID and returns the associated command. GetMenuAndItem() takes a command and returns the associated menu and item ID.

If you want to delete a menu whose commands have been registered, you can use the UnregisterCommand() member function to, one-at-a-time, unregister the commands in that menu. Otherwise, you’ll orphan commands in the command table.

EnableCommand() and EnableAndCheckCommand() let you enable, disable, check, and uncheck a menu command. GetItemString() and SetItemString() allow you to retrieve and set an items name using its command.

HideMenuBar() and ShowMenuBar() let you hide and show the menu bar (what a concept!). Invalidate() marks the menu bar as needing to be redrawn. Validate() sets the menu bar as up to date. RedrawIfNeeded() redraws the menu bar if the invalid flag has been set. Note that RedrawIfNeeded() is called in Sprocket’s main event loop, so there’s no need for you to call it yourself.

This Month’s Resources

Sprocket gets its resources from four different resource files. CreditsBox.rsrc contains the resources used to build the Sprocket about box. StandardMenus.rsrc contains some standard MENU and CMNU resources. If you want to change any of these menus, copy the appropriate resource from StandardMenus.rsrc into SprocketStarter.rsrc and delete the original from StandardMenus.rsrc. Modify the version you copied into SprocketStarter.rsrc.

Sprocket.rsrc contains various resources used by Sprocket and should not be modified. SprocketStarter.rsrc is your resource center. Put all the resources you add to Sprocket there.

You’ll need to modify one resource and add three new ones to SprocketStarter.rsrc. First, open up MBAR 128 and add menu ID 1000 to the list already in place.

If you’re not using Projector (the sourced code control system), you might want to delete the ckid resources you’ll find in each of the resource files. That will get rid of the annoying link error complaining about the multiply-defined resource.

Next, you’ll create your three CMNU resources. The first represents the Options menu we want to add to the end of the menu bar. In general, when you add a new resource to Sprocket, you’ll start numbering your resources from 1000, instead of at 128 the way you normally would. This is just a convention, and might change as Sprocket grows up.

When you create CMNU 1000, be sure to change the resource ID in both places: once in the “Get Info” box and also in the “Edit Menu and MDEF ID” dialog.

Figure 3. CMNU 1000

Enter a command number of 1000 for the item Change My Name, 1001 for Disable Me, 1002 for Enable Previous Item, 1003 for Add Extra Menu, and 1004 for Beeps. Next, disable the item Enable Previous Item. After that, click on the Beeps item, check the has SubMenu checkbox and enter 100 as the submenu ID (Figure 4). Since submenu IDs are limited to a single byte, we won’t be able to give the submenu CMNU resource an ID greater than 1000. So much for sticking to conventions!

Figure 4. The Beeps item, with its submenu ID of 100 entered.

Next, create a new CMNU resource with an ID of 1001 (Once again, be sure to change the ID in both places). The menu will have a title of Extra Menu and a single item, Delete This Menu. Give the item Delete This Menu a command of 1007 (Figure 5).

Figure 5. CMNU 1001

Finally, create a CMNU resource with an ID of 100. Add two items, Beep Once with a command ID of 1005 and Beep Twice with a command ID of 1006 (Figure 6).

Figure 6. CMNU 100.

Save your changes and quit your resource editor.

Modifying the Source Code

Now launch CodeWarrior or Symantec C++ and edit SprocketStarter.h. Start by adding this global reference to the file:

extern Boolean   gItemNameChanged;

gItemNameChanged is a Boolean that indicates whether the item Change My Name has been selected. It tells us whether the item should read Change My Name or Change Me Back Again.

Next, add this enum to the file:

enum
{
 mSubMenu = 100,
 mExtraMenu = 1001,
 
 cChangeName= 1000,
 cDisableMe = 1001,
 cEnablePrevious = 1002,
 cAddExtraMenu   = 1003,
 cBeeps = 1004,
 cBeepOnce= 1005,
 cBeepTwice = 1006,
 cDeleteExtraMenu= 1007
};

The first two constants specify the two CMNU resource IDs. The next 8 specify the menu command IDs. Notice that the menu constants start with a lower case “m” and the commands start with a lower case “c”. Unfortunately, the Apple event registry starts all its class names with a lower-case “c”, so be on the lookout for name collisions.

Next, add these three constants to the file:

const StringPtr kUnchangedName = "\pChange My Name";
const StringPtr kChangedName = "\pChange Me Back Again";
const short kLastMenu = 0;

The first two are just Pascal strings we used for the menu names. We really should have implemented these strings as ‘STR ’ resources to make the code easier to localize. In general, I try never to specify strings in code, but I guess I was just feeling a bit lazy.

The last constant will be used in our call of InsertMenu(), telling InsertMenu() to insert the menu at the end of the menu bar.

Next, edit the file SprocketStarter.cp. Start by adding this global definition at the top of the file:

Boolean gItemNameChanged = false;

Next, add these three lines to the beginning of the routine SetUpApplication():

MenuRef hierMenu;

hierMenu = gMenuBar->GetMenuFromCMNU( mSubMenu );
InsertMenu( hierMenu, -1 ); 

GetMenuFromCMNU() loads CMNU 100, registers all the commands, and returns a MenuHandle to a standard menu based on the CMNU resource. InsertMenu() inserts the resulting menu in the menu bar.

Finally, add the cases to handle our new commands to the switch in HandleMenuCommand() further down in SprocketStarter.cp. Here’s my edited copy of HandleMenuCommand():

HandleMenuCommand
void
HandleMenuCommand(MenuCommandID theCommand)
 {
 MenuRefextraMenu;
 OSErr  err;
 
 switch (theCommand)
 {
 case cAbout:
 AboutBox();
 break;
 
 case cNew:
 CreateNewDocument();
 break;
 
 case cOpen:
 OpenExistingDocument();
 break;
 
 case cPreferences:
 TPreferencesDialogWindow * prefsDialog = 
 new TPreferencesDialogWindow;
 break;
 
#ifqAOCEAware
 case cNewMailableWindow:
 TMailableDocWindow *aWackyThing = new TMailableDocWindow;
 break;
#endif

Here come the new commands. This first one switches the first menu item between Change My Name and Change Me Back Again. Notice that we’re using the global TMenuBar object to change the menus. If Sprocket ever gets modified to use more than one menu bar, we’ll have to modify this code to be sure we use the menu bar that contains the menu we want to work with. Of course, if that happens, you can count on some sample code in this column to show you how to do that.

 case cChangeName:
 if ( gItemNameChanged )
 gMenuBar->SetItemString( cChangeName, kUnchangedName );
 else
 gMenuBar->SetItemString( cChangeName, kChangedName );
 gItemNameChanged = ! gItemNameChanged;
 break;

This command disables Disable Me and enables Enable Previous Item.

 case cDisableMe:
 gMenuBar->EnableCommand( cDisableMe, false );
 gMenuBar->EnableCommand( cEnablePrevious, true );
 break;

This command does just the opposite.

 case cEnablePrevious:
 gMenuBar->EnableCommand( cDisableMe, true );
 gMenuBar->EnableCommand( cEnablePrevious, false );
 break;

This command disables the item that spawned this command in the first place (Add Extra Menu), then builds a new menu from the extra menu CMNU resource. We add the new menu to the end of the menu bar, then call Invalidate() to force the menu bar to get redrawn.

 case cAddExtraMenu:
 gMenuBar->EnableCommand( cAddExtraMenu, false );
 extraMenu = gMenuBar->GetMenuFromCMNU( mExtraMenu );
 InsertMenu( extraMenu, kLastMenu );

 gMenuBar->Invalidate();
 break;

This command deletes the extra menu we added with the previous command. First, we reenable the Add Extra Menu item. Notice that we didn’t have to retrieve the menu that this item belongs to. All we needed was the command. This definitely makes life a lot simpler.

 case cDeleteExtraMenu:
 gMenuBar->EnableCommand( cAddExtraMenu, true );

Since the TMenuBar class doesn’t support a DeleteCMNU() method, we’ll have to deregister the command by hand. A DeleteCMNU() method would step through all the items in the specified menu, calling UnregisterCommand() for each item. It would then delete the menu for us. Since our extra menu only contains a single item, it’s no big deal to do this by hand. Once we are done, we’ll force a menu bar redraw. Look for a DeleteCMNU() method in a future version of Sprocket.

 err = gMenuBar->UnregisterCommand( cDeleteExtraMenu );
 DeleteMenu( mExtraMenu );
 
 gMenuBar->Invalidate();
 break;

This next command corresponds to the parent menu of our hierarchical submenu. Normally, this command will never get called because the menu manager won’t detect a selection of the parent item of a submenu (Figure 7). There are times when this is useful, however. For example, imagine if you built a menu of applications, where each application item had a submenu listing some frequently used documents that can be opened by that application (NowMenus does this). If you select a document from a submenu, its parent application gets launched and opens the selected document. If you release the mouse with the application selected (without selecting a document from the submenu), you might want to launch the application without specifying a document.

The point here is this: Specify commands for all your menu items, even the hierarchical parent menus. A future version of Sprocket might include a workaround to execute commands associated with these currently orphaned items.

 case cBeeps:
 break;

Figure 7. A menu item with its submenu showing.
If the mouse button was released at this point, the Beeps item
(rather than either of the submenu items) would be selected.

These next two items are horribly technical. They beep either once or twice, depending on the item selected.

 case cBeepOnce:
 SysBeep( 20 );
 break;
 case cBeepTwice:
 SysBeep( 20 ); SysBeep( 20 );
 break;
 default:
 break;
 }
 }

Till Next Month

There are still some concepts that we need to get into regarding Sprocket and menus. For example, when do you make the decision about which menu items you will enable and disable to ensure that things are set up correctly before a user makes a selection from a menu. How should the frontmost window affect which menu items are enabled or disabled? We’ll explore these important issues in next month’s column. See you then!

 

Community Search:
MacTech Search:

Software Updates via MacUpdate

Adobe Animate CC 2018 18.0.1.115 - Anima...
Animate CC 2018 is available as part of Adobe Creative Cloud for as little as $19.99/month (or $9.99/month if you're a previous Flash Professional customer). Animate CC 2018 (was Flash CC) lets you... Read more
Postbox 5.0.22 - Powerful and flexible e...
Postbox is a new email application that helps you organize your work life and get stuff done. It has all the elegance and simplicity of Apple Mail, but with more power and flexibility to manage even... Read more
Tunnelblick 3.7.4b - GUI for OpenVPN.
Tunnelblick is a free, open source graphic user interface for OpenVPN on OS X. It provides easy control of OpenVPN client and/or server connections. It comes as a ready-to-use application with all... Read more
Carbon Copy Cloner 5.0.5 - Easy-to-use b...
Carbon Copy Cloner backups are better than ordinary backups. Suppose the unthinkable happens while you're under deadline to finish a project: your Mac is unresponsive and all you hear is an ominous,... Read more
Bartender 3.0.32 - Organize your menu-ba...
Bartender lets you organize your menu-bar apps by hiding them, rearranging them, or moving them to Bartender's Bar. You can display the full menu bar, set options to have menu-bar items show in the... Read more
Adobe Lightroom Classic CC 7.1 - Import,...
Adobe Lightroom is available as part of Adobe Creative Cloud for as little as $9.99/month bundled with Photoshop CC as part of the photography package. Lightroom 6 is also available for purchase as a... Read more
Ortelius 2.0.8 - Vector drawing app espe...
Ortelius is a full-featured vector drawing application especially for map design. Draw directly with features such as roads, rivers, coastlines, buildings, symbols and contours. Ortelius is known for... Read more
Tunnelblick 3.7.4b - GUI for OpenVPN.
Tunnelblick is a free, open source graphic user interface for OpenVPN on OS X. It provides easy control of OpenVPN client and/or server connections. It comes as a ready-to-use application with all... Read more
Carbon Copy Cloner 5.0.5 - Easy-to-use b...
Carbon Copy Cloner backups are better than ordinary backups. Suppose the unthinkable happens while you're under deadline to finish a project: your Mac is unresponsive and all you hear is an ominous,... Read more
Postbox 5.0.22 - Powerful and flexible e...
Postbox is a new email application that helps you organize your work life and get stuff done. It has all the elegance and simplicity of Apple Mail, but with more power and flexibility to manage even... Read more

Latest Forum Discussions

See All

FEZ Pocket Edition (Games)
FEZ Pocket Edition 1.0 Device: iOS Universal Category: Games Price: $4.99, Version: 1.0 (iTunes) Description: | Read more »
Amazing Katamari Damacy guide - beginner...
Amazing Katamari Damacy brings the bizarro world of the original games to mobile and shifts them into an endless format that's just as addictive as the PlayStation entries. Your goal is still to roll as much random stuff as you possibly can, though... | Read more »
Portal Knights guide - crafting tips and...
In Portal Knights, you're only as strong as the items you have at your disposal. This sandbox adventure is all about crafting and building up the next big thing. Whether you're an avid explorer or collector, crafting will likely play a large part... | Read more »
The best deals on the App Store this wee...
A new week means new discounts on the App Store. This week's deals run the gamut of action-adventure titles, puzzle games, and one of the best narrative adventure series out there. If you're looking to fill out your mobile gaming library on a... | Read more »
What you need to know about Animal Cross...
We hope you've been hard at work on collecting all of those holiday items in Animal Crossing: Pocket Camp, because you're about to get a whole new list of fun things to do as the game receives its first big update sometime soon. There are a lot of... | Read more »
Reigns: Her Majesty guide - how to use e...
Ruling a kingdom isn't easy--doubly so for a queen whose every decision is questioned by the other factions seeking a slice of power. Reigns: Her Majesty builds on the original game's swipey tactics, adding items that you can use to move the story... | Read more »
The best new games we played this week -...
Friday has crept up on us once again, so it's time to honor the best new games we've played over the past few days. This past week was a pretty exciting one, with the debut of lots of beautiful new indies and some familiar faces returning to the... | Read more »
Portal Knights guide- beginner tips and...
Portal Knights is finally making the jump to iOS and Android, and it's already climbing the ranks to become the next big MMO experience on mobile. This sprawling sandbox game will let you pursue any adventure you wish, whether you want to sling... | Read more »
Reigns: Her Majesty guide - how to swipe...
Reigns: Her Majesty is storming the App Store this week, bringing more tinder-esque kingdom building to eager players everywhere. If you've played the original Reigns, you'll know that leading a kingdom is never easy. It's a careful balancing act... | Read more »
Getting Over It (Games)
Getting Over It 1.0 Device: iOS Universal Category: Games Price: $4.99, Version: 1.0 (iTunes) Description: A game I madeFor a certain kind of person To hurt them. • Climb up an enormous mountain with nothing but a hammer and a pot.•... | Read more »

Price Scanner via MacPrices.net

Holiday sale: Apple resellers offer 2017 15″...
MacMall has 15″ MacBook Pros on sale for $220-$300 off MSRP, each including free shipping: – 15″ 2.8GHz MacBook Pro Space Gray (MPTR2LL/A): $2179, $220 off MSRP – 15″ 2.8GHz MacBook Pro Silver (... Read more
Holiday sale: Apple resellers offer 13″ MacBo...
B&H Photo has 13″ MacBook Pros on sale for up to $150 off MSRP. Shipping is free, and B&H charges sales tax for NY & NJ residents only: – 13-inch 2.3GHz/128GB Space Gray MacBook Pro (... Read more
Apple Watch Series 2, Certified Refurbished,...
Apple has Certified Refurbished Apple Watch Nike+ Series 2s, 42mm Space Gray Aluminum Case with Anthracite/Black Nike Sport Bands, available for $249 (38mm) or $279 (42mm). The 38mm model was out of... Read more
Apple offers Certified Refurbished 2016 12″ R...
Apple has Certified Refurbished 2016 12″ Retina MacBooks available starting at $949. Apple will include a standard one-year warranty with each MacBook, and shipping is free. The following... Read more
B&H drops price on 13″ 256GB MacBook Air...
B&H has the 13″ 1.8GHz/256GB Apple MacBook Air (MQD42LL/A) now on sale for $1079 including free shipping plus NY & NJ sales tax only. Their price is $120 off MSRP, and it’s the lowest price... Read more
Holiday sale: 9″ iPads starting at $299, take...
MacMall has 9″ WiFi iPads on sale for $30 off including free shipping: – 9″ 32GB WiFi iPad: $299 – 9″ 128GB WiFi iPad: $399 Read more
Green Monday deal: 15″ 2.8GHz MacBook Pro on...
B&H Photo has the 15″ 2.8GHz Space Gray MacBook Pro on sale for $250 off MSRP for today only as part of their Green Monday/Holiday sale. Shipping is free, and B&H charges sales tax for NY... Read more
Green Monday sale: B&H offers 12″ Apple i...
B&H Photo has 12″ iPad Pros on sale for up to $150 off MSRP as part of their Green Monday/Holiday sale. Shipping is free, and B&H charges sales tax in NY & NJ only: – 12″ 64GB WiFi iPad... Read more
Holiday deal: 21″ and 27″ Apple iMacs on sale...
MacMall has 2017 21″ and 27″ Apple iMacs on sale for up to $200 off MSRP. Shipping is free: – 21″ 2.3GHz iMac: $999 $100 off MSRP – 21″ 3.0GHz iMac: $1199 $100 off MSRP – 21″ 3.4GHz iMac: $1379 $120... Read more
Holiday deal: Apple Mac minis for up to $150...
MacMall has Mac minis on sale for up to $100 off MSRP, each including free shipping: – 1.4GHz Mac mini: $399 $100 off MSRP – 2.6GHz Mac mini: $599 $100 off MSRP – 2.8GHz Mac mini: $949 $50 off MSRP... Read more

Jobs Board

QA Automation Engineer, *Apple* Pay - Apple...
# QA Automation Engineer, Apple Pay Job Number: 113202642 Santa Clara Valley, California, United States Posted: 11-Dec-2017 Weekly Hours: 40.00 **Job Summary** At Read more
*Apple* Retail - Multiple Positions - Apple,...
Job Description:SalesSpecialist - Retail Customer Service and SalesTransform Apple Store visitors into loyal Apple customers. When customers enter the store, Read more
*Apple* Retail - Multiple Positions - Apple,...
Job Description: Sales Specialist - Retail Customer Service and Sales Transform Apple Store visitors into loyal Apple customers. When customers enter the store, Read more
*Apple* Retail - Multiple Positions - Apple,...
Job Description:SalesSpecialist - Retail Customer Service and SalesTransform Apple Store visitors into loyal Apple customers. When customers enter the store, Read more
*Apple* Information Security - Security Data...
# Apple Information Security - Security Data Analyst Job Number: 113119545 Austin, Texas, United States Posted: 10-Nov-2017 Weekly Hours: 40.00 **Job Summary** This Read more
All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.