TweetFollow Us on Twitter

Prograph Undo
Volume Number:11
Issue Number:3
Column Tag:Visual Programming

Filters & Sieves in Prograph CPX

Fooling the user gets the job undone

By Kurt Schmucker, Apple Computer, Inc.

Note: Source code files accompanying article are located on MacTech CD-ROM or source code disks.

Command objects as implemented in most Macintosh frameworks provide an excellent way to implement undo for most types of user actions in most types of applications - most, but not all.

Typically, the command object stores enough information to be able to perform the action, to be able to undo the action, and to be able to redo the action. In response to a user action, your code allocates an appropriate command object, initializes that object, and then returns that object to the framework. The framework will immediately send the “DoIt” message to this object to have the desired action performed. The framework holds onto that command object and will automatically send the “UndoIt” and “RedoIt” messages to the object if the user chooses the Undo or Redo from the Edit menu. The command object, using its stored data, will then undo or redo the operation. This completely relieves the developer from the responsibility for the run-time handling of the Undo menu item. [1]

This scheme works as long as there is enough memory and speed to undo and redo the operation (which is the whole point of implementing the command object.) Unfortunately, this is not always the case. For example, consider a structured drawing program like MacDraw or Canvas. In such a program, the user can select any subset of the objects that have been drawn and bring those selected objects “to the front,” that is, re-order them in the z-coordinate. It would not be possible to store the old order of the objects, in a reasonable amount of memory, in order to be able to effect an undo. (Admittedly, the definition of ‘reasonable’ is subjective. The straightforward use of command objects for this Bring to Front operation would require memory proportional to the number of objects in the entire drawing. The approach explained here requires only memory for the number of objects in the selection.)

The problem is that sometimes, implementing undo with the basic command object is inefficient, impractical, or actually impossible. One way around this difficulty is to use the technique of filters and sieves in conjunction with command objects. Neither MacApp, TCL, nor the Prograph ABCs implement filters and sieves, although the Lisa Toolkit did.[2] I have added a rudimentary version of filters and sieves to the Prograph ABCs, and this article is about that implementation and about how you can make use of this technique in your applications.

To illustrate these ideas, I have implemented two small applications that use the technique of filters and sieves: an icon editor, and a modified version of the MiniQuadWorld application.[2] The Prograph version of both these apps is on the associated MacTech Magazine diskette, along with the its full source code (in standard Prograph project and section files).

Introduction to Filters and Sieves

Filters and sieves address situations where there is just not a reasonable way to implement undo for the user. The operations in question are not those for which undo is simply impossible - how do you get the LaserWriter to suck back in the paper after you have issued a print command, for example - but rather those operations that from the point of view of the average user should be undoable, but which you know will take too long, consume too much space, or are just computationally intractable. So, if these operations are too difficult to undo in reality, then we will just fool the user into thinking that they are undoable. And the way to do that is to fool the user into thinking that we have ever done them at all: that way we never really have to undo them!

Let’s consider a very small example. Suppose we are implementing a structured graphics editor like MacDraw or Canvas. Further suppose that we want to provide the user with the ability to change the fill pattern of a shape, and that to undo this operation is extremely difficult. (Yes, I know that undoing this type of operation is actually trivial. Let’s just pretend that it is extremely difficult.) Yet, we want to provide the user with the ability to undo fill pattern changes. We can provide undo for this operation if we just fool that user that we have ever performed the fill pattern change in the first place. Since we haven’t really changed the fill pattern, then undoing it is easy-we just stop fooling the user and the status quo, which never really changed, is again revealed. We fool the user by modifying the drawing code something like this:

PROCEDURE TShapeGraphicalView.Draw(area: Rect);

 PROCEDURE FilterAndDrawShape(shape: TShape);
 VAR tempShape: TShape;
 BEGIN
 IF shape <> newlyPatternedShape
 THEN shape.Draw {this shape is NOT the special one }
 ELSE BEGIN
 tempShape := shape.Clone;
 tempShape.SetFillPattern(newFillPattern);
 tempShape.Draw;
 tempShape.Free;
 END
 END;
BEGIN
 SELF.fDocument.EachShapeDo(FilterAndDrawShape);
END;

This code enables the view to check whether each shape in the document is a special shape that should not be drawn in the normal manner, but rather in a special way - in this example with a new fill pattern. Thus the shapes in the document are filtered through a sieve that allows most shapes to pass through and thus be drawn unchanged. But this sieve catches one special shape, the one referenced by the variable newlyPatternedShape, doesn’t let this shape be drawn, but rather clones it, changes the fill pattern of the clone, draws the clone, and then throws the clone away. This is conceptually represented in Figure 1. (The small code fragment above is not at all representative of the way in which filters and sieves would actually be used, nor of how they would be added to an application framework. It is merely illustrative of the idea of filtering. More realistic code will be shown later.)

Figure 1. Conceptual model of a filter that alters the display of a single object
in the view presented to the user.

What we have done here is to present to the user the illusion that the shape’s fillPattern has changed. In reality, of course, it has not. Thus, if the user wants to undo this action, all we have to do is nil out the newlyPatternedShape reference and re-draw the view. The old pattern will automatically be drawn. If, on the other hand, the user wants to continue modifying the drawing, then we need only actually perform the pattern change just before we execute the next request from the user. With this pattern change thus ‘committed’, we need only nil out the newlyPatternedShape reference-there is no need to re-draw the view since the screen is already showing the shape drawn with the new pattern. At this point the pattern change operation cannot be undone.

It is possible to consider using filters and sieves when the data of the application is inherently structured, as is the case in graphics editor like MacDraw or Canvas, a database application, word processor, etc. It is not so easy to apply when the data of the application is unstructured, as in a bitmap editor. In an application with an unstructured store, it is not reasonable to have a filter that will distinguish one of the unstructured bits in the document and process it differently. However, a technique that can sometimes be used to get an effect similar to that of filters and sieves is the technique of transparencies. Like filters and sieves, transparencies enable you to present to the user the illusion of having performed some operation, when in reality you have not done so. As with filters and sieves, this enables you to easily undo the operation. With transparencies, you superimpose additional image data in such a way that it can add to or subtract from the actual image data. Figure 2 illustrates the conceptual model of transparencies. The technique of filters and sieves, and the technique of transparencies are similar, so I will describe an implementation that will add both techniques to the Prograph ABCs.

Figure 2. Conceptual model of a transparency that adds to (or can subtract from)
the display of unstructured data in the view presented to the user.

Filters and Sieves in an Application Framework

The code fragment shown in the last section is not representative of the way in which you would use filters and sieves in a large application. This is because the approach in that fragment would lead to a situation in which the quirks of each operation’s undo requirements would be reflected in the structure of the view’s Draw method - the depths of unmodularity! A more uniform, modular, and scalable mechanism is needed. One way to do this is to combine the notions of filters and sieves with that of command objects. Each command object would have a Filter method that would traverse the objects in the document, and enable that command object to specially process certain objects, in whatever way is necessary for the operation that the command implements. The view would call the current command’s Filter method to perform tasks like drawing or processing of mouse clicks.

Let’s sketch out how this more modular approach would work for the same operation examined above: changing a shape’s fill pattern in a structured graphics editor. Assume the existence of TShapeView, TShapeDocument, and TChangeFillPatternCommand classes that provide the standard behaviors that you would expect in an application framework like MacApp, TCL, or the ABCs. In addition to this standard behavior, command objects have a FilterAndDo method, documents have an EachShapeDo method, and views have a slightly modified Draw method as shown here (expressed in a generic textual object-oriented language that just happens to look a lot like Object Pascal):

PROCEDURE TShapeGraphicalView.Draw(area: Rect);

 PROCEDURE FilterAndDrawShape(shape: TShape);
 BEGIN
 shape.Draw;
 END;
BEGIN
 SELF.fDocument.EachShapeDo(FilterAndDrawShape);
END;

PROCEDURE TShapeDocument.EachShapeDo(
 PROCEDURE DoToShape(shape: TShape));
VARtempShape:  TShape;
 shapeList: TList;
BEGIN
 IF gLastCommand <> NIL THEN
 IF gLastCommand.fDone THEN
   IF gLastCommand.fFiltering
 THEN gLastCommand.FilterAndDo(DoToShape)
 ELSE BEGIN
 shapeList := SELF.GetShapeList;
 tempShape := shapeList.First;
 WHILE (tempShape <> NIL) DO
 BEGIN
 DoToShape(tempShape);
 tempShape := shapeList.Next;
 END;
 END;
END;

PROCEDURE TChangeFillPatternCommand.FilterAndDo(
 PROCEDURE DoToShape(shape: TShape));

VARtempShape:  TShape;
 shapeList: TList;
BEGIN
 shapeList := SELF.GetShapeList;
 tempShape := shapeList.First;
 WHILE (tempShape <> NIL) DO
 BEGIN
 IF (tempShape <> 
 SELF.fNewlyPatternedShape)
 THEN DoToShape(tempShape); 
    {this shape is NOT the special one }
 ELSE BEGIN
 tempShape := tempShape.Clone;
 tempShape.SetFillPattern(newFillPattern);
 DoToShape(tempShape); 
 tempShape.Free;
 END;
 tempShape := shapeList.Next;
 END;
END;

Or, as expressed in Prograph, as shown in Figure 3.

Figure 3. Basic use of filters and sieves with command objects

Filters and Sieves in CPX

Approach

There were two somewhat conflicting goals in my approach to adding filters, sieves, and transparencies (FST) to the Prograph ABCs: my first goal was to produce a design that was good enough to use on several Prograph projects I was working on, and hopefully, would be useful to other Prograph developers. The second goal was to modify the ABCs as little as possible so that the FST section would be easy to port to new versions of the ABCs as they were released. These goals are in conflict because to FST requires modifications throughout the command handling apparatus of a framework, thus I had to make some compromises.

I had to be able to distinguish a command that used FST from a command that didn’t. I also had to add an extra operation in the command handling algorithm: committing a FST command operation just before it was disposed. I had to have both the filtering mechanism for structured documents and the transparency mechanism for unstructured ones. Thus, the obvious steps looked like:

• adding a boolean ‘Filtering?’ attribute to Command

• adding a ‘Commit Command’ step to the Commander’s processing of commands

• adding a Filter & Do method to Command, making use of the Prograph inject mechanism to have this single method accomplish different tasks, and

• adding a new drawing step (transparencies) to the already multilevel drawing algorithm used in the ABCs.

Adding a boolean ‘Filtering?’ attribute to Command

I expected this to be the easiest step, but it turned out to be the hardest. While adding an attribute to a class in Prograph is just a single mouse click, there are a lot of side effects when that class is the ancestor to a large number of classes with aliases in many different sections, and when there are instances of that class (or its subclasses) scattered throughout your application. The Command class is the ancestor of more than 15 classes in the ABCs, and instances of many of these classes (e.g., Menu Behavior, (Click or Draw) Behavior, etc.) are created by the editors while you are designing your application with Prograph’s graphical interface builder, the ABEs. In fact, after I finally realized that adding the attribute was not going to work, just backing out of this change took over an hour.

I still needed to add something like a boolean attribute to Command. What I ended up doing was using a method as a virtual attribute. Since the value of the Filtering? attribute that I wanted to add was not going to change for the lifetime of any particular instance, and since the value would be the same for all instances of a given Command subclass, I added a method Filtering? to Command that just returns FALSE. When you subclass Command to make a filtering command, you just overshadow the Filtering? method and change its implementation to return TRUE.

Adding a ‘Commit Command’ step to the Commander

This turned out to be very easy. In the standard version of the ABCs, the Commander disposes of the last command object as the first step in processing a new one (in Commander/Do Command). While I could have just instructed Prograph programmers using my FST unit to perform any commit action in their command subclass’s Dispose method, I felt this was probably something that would be a common source of programming errors, so I added a Commit method to Command, and a call to this method in Commander/Do Command. Most filtering subclasses will override Commit to perform the operation associated with the command, and store the results in the document.

Adding a Filter and Do method to Command

This turned out to be less elegant than I hoped for, primarily because the differing arities for the different uses of Filter & Do make a single implementation of Filter & Do impossible. When the task to be done by the filtering command object is drawing, then there is no return value from the operation. However, when the task is determining the set of objects currently shown to the user, there is a return value, the list of objects. And when the task is processing a mouse click, there is an additional input value, the click point.

The inject operator in Prograph is powerful and it lets you do some really nifty stuff, but the methods that use inject have the same arity matching requirements as any other method. This arity difference meant that one single abstract Filter & Do method could not be designed. In effect, what I had to do was to implement three methods: Filter-&-Do-one-input-and-no-return-value, a Filter-&-Do-with-one-input-and-one-return-value and a Filter-&-Do-with-two-inputs-and-one-return-value. It didn’t feel real elegant, but there didn’t seem to be any way around it. (I guess I shouldn’t feel so bad, since even the designers of Smalltalk had to make exactly the same compromise that I did. The Smalltalk equivalent of inject is perform; if you look at the Smalltalk sources you will see the inelegant but necessary perform: (one arguments), perform: with:(two arguments), perform: with: with: (three arguments), and perform: withArguments: (many arguments).)

Rather than pick method names that were so generic as to be almost meaningless, I decided to name the three Filter & Do variants in a way that suggested their most common uses: Filter & Draw, Filter Virtual Document, and Filter & Process Click. All filtering commands must override all of these methods.

Adding transparencies

Adding transparencies to the ABCs turned out to be quite straightforward. After the standard View/Draw Content method executes, the Draw Virtual Content checks to see if there is a filtering command currently being stored by the Commander. If so, then that command is given the opportunity to draw its ‘transparency’ on top of the already drawn view. (See Figure 4.) It is up to the individual application and command to determine how to store this virtual data, and how to make sure that the virtual data can both add to and subtract from the view of the data shown to the user.

Figure 4. Adding transparencies to the ABCs.

Using Filters and Sieves

I implemented two small applications that use my FST section. While these applications are far from being full-bodied applications, they do show how these techniques can be used in real products.

Structured Graphics Editor

The small structured graphics editor that I built has one window that uses ordinary vanilla command objects, and one that uses command objects with filters and sieves. (See Figure 5.) There are only 4 operations that a user of this app can perform on the geometric shapes shown in the window: select any number of shapes, clear any number of shapes, rotate any number of shapes by 45°, and recolor a single shape. Of these operations, all are undoable except selection. In the standard window (with vanilla commands) undo for each of the undoable operations is provided with the standard undo mechanism, but in the filtering window, undo for all three of the commands is provided for with filters and sieves. Thus, examining the source for this application will enable you to quickly compare and contrast these two approaches to undo. I purposely designed and implemented these windows to be as independent as possible to assist you in this comparison. While it would have been possible to have either as the subclass of the other, I believed that this would have been an arbitrary code sharing decision, and not a conceptually clean design that would be the easiest to learn from.

Figure 5. The small structured graphics editor
modified to use filters and sieves for undo.

This application is a modification of the MiniQuadWorld app described in an earlier MacTech Magazine article. I tried to make the minimal modifications to this app to add the use of filters and sieves for undo, so this app is indicative of the kind of work you would have to do to add filters and sieves to an existing application.

Let’s examine what I had to do to add filters and sieves to this app. First, I had to make a new document subclass that let the current command control how a search for a particular object in the document was conducted when the user clicked in the window’s view. This meant that I had to modify the Find Quad under the Click method, but this was the only method I had to change. (I did have to add one new Document method: Get Virtual QuadList.) Since I was not using transparency in this app, my view class descends just from View and not from View with Transparency. I did have to modify this view’s Draw method to let the command object manage the drawing operation. A new window subclass was needed only because the ABCs require a new window subclass for every kind of window, not because of filters and sieves. I then added new command classes for each of the undoable operations.

To make a command subclass use filters & sieves involved the following steps (see Figure 6):

Figure 6. The method overloading necessary to use filters and sieves
in a command object.

• Make sure that the command’s Do, Undo, and Redo just set things up for the particular state desired, as opposed to actually performing the command’s basic operation (e.g., clearing)

• Overload the Filtering? method and change its return value to TRUE

• Overload the Filter & Draw and the Filter & Process Click methods to control drawing and mouse click operations when the command has been executed but not committed. Figures 7 and 8 show these methods for the Filtered Rotate Quad Cmd class.

• Add a method to return the set of objects currently being shown to the user, the virtual document data. In this application, this method is named Get Virtual Quadlist.

Figure 7. The Filtered Rotate Quad Cmd/Filter & Draw method.

Figure 8. The Filtered Rotate Quad Cmd/Filter
& Process Click method.

Icon Editor

Figure 9 shows the main window of the small icon editor I wrote that uses transparencies to implement undo for the icon editing operation. (The functionality of this small app is modeled after the icon editing app used in the MacApp 3.0 tutorial.)

Figure 9. The main window of the icon editing app
which uses transparencies to implement undo for the editing operation.

Transparencies turned out to be a very natural and easy way to implement undo in this application. Figure 10 shows the important pieces of code involved in the view’s drawing operation.

Figure 10. The transparency drawing code for the icon view.
This code retrieves the data stored in the transparency and draws that data
in a manner similar to, but not identical with, the main drawing code of the view.
The difference is that the transparency has to be able to, in effect,
erase portions of what was drawn by the main drawing code.

What Worked and What Didn’t

This all worked about like I expected it would, although with a few small surprises. Because much of the ABCs standard functionality (saving, printing, etc.) is not implemented with undoable commands, and because I was now fooling the user by presenting something that wasn’t really stored in the document, I had to take care not the fool the framework also. For example, when printing or saving, I had to make sure that any filtering command was committed first.

Certainly, if Prograph International added FST to a future release of the ABCs, they would be able to do a smoother job of integrating, making the job of the application implementor a little easier. Until then, I hope my filtering unit is of some use.

References

[1] Schmucker, Kurt. “Commands and Undo in Prograph CPX”, MacTech Magazine, January 1995.

[2] Schmucker, Kurt. Object Oriented Programming for the Macintosh, Hayden Book Company, 1986.

 

Community Search:
MacTech Search:

Software Updates via MacUpdate

Capto 1.2.9 - $29.99
Capto (was Voila) is an easy-to-use app that takes capturing, recording, video and image editing to the next level. With an intelligent file manager and quick sharing options, Capto is perfect for... Read more
Opera 51.0.2830.40 - High-performance We...
Opera is a fast and secure browser trusted by millions of users. With the intuitive interface, Speed Dial and visual bookmarks for organizing favorite sites, news feature with fresh, relevant content... Read more
GarageSale 7.0.13 - Create outstanding e...
GarageSale is a slick, full-featured client application for the eBay online auction system. Create and manage your auctions with ease. With GarageSale, you can create, edit, track, and manage... Read more
1Password 6.8.7 - Powerful password mana...
1Password is a password manager that uniquely brings you both security and convenience. It is the only program that provides anti-phishing protection and goes beyond password management by adding Web... Read more
Evernote 7.0.1 - Create searchable notes...
Evernote allows you to easily capture information in any environment using whatever device or platform you find most convenient, and makes this information accessible and searchable at anytime, from... Read more
MacUpdate Desktop 6.2.0 - $20.00
MacUpdate Desktop brings seamless 1-click app installs and version updates to your Mac. With a free MacUpdate account and MacUpdate Desktop 6, Mac users can now install almost any Mac app on... Read more
HoudahSpot 4.3.5 - Advanced file-search...
HoudahSpot is a versatile desktop search tool. Use HoudahSpot to locate hard-to-find files and keep frequently used files within reach. HoudahSpot will immediately feel familiar. It works just the... Read more
EtreCheck 4.0.4 - For troubleshooting yo...
EtreCheck is an app that displays the important details of your system configuration and allow you to copy that information to the Clipboard. It is meant to be used with Apple Support Communities to... Read more
WhatsApp 0.2.8361 - Desktop client for W...
WhatsApp is the desktop client for WhatsApp Messenger, a cross-platform mobile messaging app which allows you to exchange messages without having to pay for SMS. WhatsApp Messenger is available for... Read more
iClock 4.2 - Customize your menubar cloc...
iClock is a menu-bar replacement for Apple's default clock but with 100x features. Have your Apple or Google calendar in the menubar. Have the day, date, and time in different fonts and colors in the... Read more

Latest Forum Discussions

See All

The best games like Florence
Florence is a great little game about relationships that we absolutely adored. The only problem with it is it's over a little too soon. If you want some other games with some emotional range like Florence, check out these suggestions: [Read more] | Read more »
Angry Birds Champions adds cash prizes t...
Collaborating with developer Rovio Entertainment, GSN Games has released a twist on the Angry Birds formula. Angry Birds Champions features the same bird-flinging gameplay, but now you can catapult Red and co for cash. | Read more »
Around the Empire: What have you missed...
148Apps is part of a family. A big family of sites that make sure you're always up to date with all the portable gaming news. Just like a real family, I guess. I don't know, my mum never told me anything about Candy Crush to be fair. [Read more] | Read more »
The Battle of Polytopia Guide - Tips for...
The addition of multiplayer to The Battle of Polytopia has catapulted the game from a fun enough time waster to a fully-fledged 4X experience on your phone. We've been playing quite a few matches over the past week or so, and we've put together a... | Read more »
All the best games on sale for iPhone an...
Hi there, and welcome to our round up of all the best games that are on sale for iOS at the moment. It's not a vintage week in terms of numbers, but I'm pretty sure that every single one of these is worth picking up if you haven't already played... | Read more »
Disc Drivin' 2 Guide - Tips for the...
We're all still playing quite a bit of Disc Drivin' 2 over here at 148Apps, and we've gotten pretty good at it. Now that we've spent some more time with the game and unlocked more powerups, check out some of these more advanced tips: | Read more »
Alto's Odyssey Guide - How to Tackl...
Alto’s Odyssey is a completely stunning and serene runner, but it can also be a bit tricky. Check out these to try and keep your cool while playing this endless runner: Don’t focus too much on tasks [Read more] | Read more »
Here's everything you need to know...
Alto's Odyssey is a really, really good game. If you don't believe me, you should definitely check out our review by clicking this link right here. It takes the ideas from the original Alto's Adventure, then subtly builds on them, creating... | Read more »
Alto's Odyssey (Games)
Alto's Odyssey 1.0.1 Device: iOS Universal Category: Games Price: $4.99, Version: 1.0.1 (iTunes) Description: Just beyond the horizon sits a majestic desert, vast and unexplored. Join Alto and his friends and set off on an endless... | Read more »
Vainglory 5v5: Everything you need to kn...
Vainglory just got bigger. [Read more] | Read more »

Price Scanner via MacPrices.net

Apple AirPods in stock today for $159, free s...
Adorama reports stock of Apple AirPods today for $159 including free shipping, plus pay no sales tax outside of NY & NJ. See our Apple AirPod Price Tracker for the latest prices and stock status... Read more
Saturday Sale: Amazon offers 12″ 1.3GHz MacBo...
Amazon has Silver and Gold 2017 12″ 1.3GHz Retina MacBooks on sale for $250 off MSRP. Shipping is free: – 12″ 1.3GHz Silver MacBook: $1349.99 $250 off MSRP – 12″ 1.3GHz Gold MacBook: $1349.99 $250... Read more
Use your Apple Education discount and save up...
Purchase a new Mac using Apple’s Education discount, and take up to $400 off MSRP. All teachers, students, and staff of any educational institution with a .edu email address qualify for the discount... Read more
Apple Canada offers 2017 21″ and 27″ iMacs fo...
 Canadian shoppers can save up to $470 on the purchase of a 2017 current-generation 21″ or 27″ iMac with Certified Refurbished models at Apple Canada. Apple’s refurbished prices are the lowest... Read more
9″ iPads available online at Walmart for $50...
Walmart has 9.7″ Apple iPads on sale for $50 off MSRP for a limited time. Sale prices are for online orders only, in-store prices may vary: – 9″ 32GB iPad: $279.99 $50 off – 9″ 128GB iPad: $379.99 $... Read more
15″ Apple MacBook Pros, Certified Refurbished...
Save $360-$420 on the purchase of a 2017 15″ MacBook Pro with Certified Refurbished models at Apple. Apple’s refurbished prices are the lowest available for each model from any reseller. An standard... Read more
Amazon restocks MacBook Pros with models avai...
Amazon has restocked 15″ and 13″ Apple MacBook Pros with models on sale for up to $251 off MSRP. Shipping is free. Note that stock of some Macs may come and go (and some sell out quickly), so check... Read more
Lowest price of the year: 15″ 2.8GHz Apple Ma...
Amazon has the 2017 Space Gray 15″ 2.8GHz MacBook Pro on sale today for $251 off MSRP. Shipping is free: – 15″ 2.8GHz Touch Bar MacBook Pro Space Gray (MPTR2LL/A): $2148, $251 off MSRP Their price is... Read more
Apple restocks full line of Certified Refurbi...
Apple has restocked a full line of Apple Certified Refurbished 2017 13″ MacBook Pros for $200-$300 off MSRP. A standard Apple one-year warranty is included with each MacBook, and shipping is free.... Read more
Lowest sale price available for 13″ 1.8GHz Ma...
Focus Camera has the 2017 13″ 1.8GHz/128GB Apple MacBook Air on sale today for $829 including free shipping. Their price is $170 off MSRP, and it’s the lowest price available for a current 13″... Read more

Jobs Board

*Apple* Media Products Commerce Engineering...
# Apple Media Products Commerce Engineering Manager Job Number: 56207285 Santa Clara Valley, California, United States Posted: 26-Jan-2018 Weekly Hours: 40.00 **Job Read more
Digital Platforms Lead, Today at *Apple* -...
# Digital Platforms Lead, Today at Apple Job Number: 56178747 Santa Clara Valley, California, United States Posted: 23-Feb-2018 Weekly Hours: 40.00 **Job Summary** Read more
*Apple* Retail - Multiple Positions - Apple,...
Job Description:SalesSpecialist - Retail Customer Service and SalesTransform Apple Store visitors into loyal Apple customers. When customers enter the store, Read more
*Apple* Retail - Multiple Positions - Apple,...
Job Description: Sales Specialist - Retail Customer Service and Sales Transform Apple Store visitors into loyal Apple customers. When customers enter the store, Read more
*Apple* Retail - Multiple Positions - Apple,...
Job Description:SalesSpecialist - Retail Customer Service and SalesTransform Apple Store visitors into loyal Apple customers. When customers enter the store, Read more
All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.