TweetFollow Us on Twitter

Dec 93 Tips, Tidbits
Volume Number:9
Issue Number:12
Column Tag:Tips & Tidbits

Tips & Tidbits

By Neil Ticktin, Editor-in-Chief

This column is your opportunity to spread the word about little bits of information that you find out about. These tidbits can be programming related or they can be user tips that are particularly useful to programmers.

MacTech Magazine will pay $25 for every tip used, and $50 for the Tip of the Month. Or you can take your award in orders or subscriptions.

To submit a tip, send in a letter to the magazine. E-mail is our preferred method, but feel free to send something via the US Mail. See page two for all addresses. If you do send snail mail, enclose a printed copy and a disk copy of the letter so that it does not have to be retyped.

Tip of the Month: Accelerating MPW's Startup Sequence

This trick is described in the Examples folder that comes with MPW. But in talking to other users, I was surprised to find few people know about it, and even fewer use it.

When MPW is launched, it executes a script named “Startup,” which sets up environment variables, aliases, custom menus, and so forth. This can take from several seconds to over a minute.

It is easy to optimize this startup sequence. After launching MPW normally, copy the following lines into the MPW Worksheet window. Then highlight them as a block and press Enter:

/* 1 */

   Rename "{MPW}"Startup "{MPW}"Startup.Old
   Begin
      Set
      Export
      Alias
      AddMenu
   End > "{MPW}"Startup

This creates an optimized Startup script that will typically execute two to ten times faster than the original. The initial “Rename” command saves the original Startup script, so you can revert to it if you decide you don’t like the results. But if you do “before and after” timings, I think you’ll be happy with the speed improvement.

There are a couple of caveats though. First, the optimized Startup script is not organized and commented the same way the original is. If you frequently change your MPW configuration, you might find the optimized script harder to read and edit. Or you might find it to be easier; the point is that it is different.

Second, if you have UserStartup files that are often modified (such as UserStartup•RunMenu, described in MacTech Magazine, October, 1993), you may wish to add a line to the end of the optimized Startup script to forcibly execute the UserStartup commands. With UserStartup•RunMenu as an example, here’s what the command would look like:

        Execute "{PrefsFolder}"UserStartup•RunMenu

In doing this, you will cause some startup commands to be executed more than once (since some commands from the UserStartup will appear in the optimized Startup script as well). As a final “tweak,” you should then edit the optimized Startup script to delete any commands which will be carried out by forcibly executed UserStartup scripts.

- Lee David Rimar, Absoft Corporation

Strings that go both ways

When writing programs in C on the Macintosh, one thing that we need to deal with is the two possible formats of strings: C-style and Pascal-style. To save the repeated conversion time between the two formats, I sometimes use a format I call the two-in-one format that has both at once.

The C-style string uses a terminating zero character (null) at the end of the string to mark it’s length. The Pascal-style string uses a length byte as the first byte of the string (see figure). Both are allocated by allocating the space for the maximum number of characters the string will hold plus one for either the length byte or the termination byte. My two-in-one format uses both a length byte as it’s first byte and the zero byte as it’s last. To allocate this, take the data size and add two for both the Pascal-style length byte and the C-style terminator. The illustration shows how the length byte, string data, and terminator are laid out.

To use this as a Pascal string, simply use it normally. To use it as a C string, pass the string address as string + 1. Of course, if the size of the string is changed, then either the length byte or the terminator will need to adjusted. If you use calls that treat it as a C string, then the length byte will need adjusting. If you use Pascal-style calls, the terminator will need adjusting. The adjusting isn’t always as hard as you might think.

The following code fragment illustrates using the two-in-one string format:

/* 2 */

Str255  stringOne;
char  stringTwo[50];

...
/*   #1 Toolbox call uses Pascal-style string. */
GetIText (dialogItemHandle, stringOne);
stringOne[stringOne[0] + 1] = ’\0’;     // Add term. byte
...
/*   #2 Uses C-style string and returns the num. of characters. */
stringTwo[0] = sprintf (stringTwo + 1, “foobar”);
...
/*   #3 Two-in-one style, notice the length plus two. */
BlockMove (stringOne, stringTwo, stringOne[0] + 2);

In #1, the toolbox call returns a Pascal-style string, so, for the two-in-one format we’ve got to add the terminator. We know that stringOne[0] is the length byte and we know that stringOne[length] is the last byte of data in the string. So, the length plus one is the terminator byte.

In #2, we’re using the string as a C-style string. Notice that the C-style string starts at an offset of one, this avoids the Pascal-style length byte. Fortunately, sprintf returns the number of bytes (characters) written if there’s no error so we can use it to adjust the length byte. Other C library calls like printf, scanf and their derivatives also return the number of characters processed.

In #3, we’re using the Toolbox call BlockMove() to copy a two-in-one format string. Since the length is the length of the data, we’ve got to add two to allow for the length byte and the terminator byte.

I’ve found that judicious use of this string format can save a lot of conversion in string-heavy programs.

- Malcolm Teas

Step-step

In Think Pascal, the option key allows you to “step-step” through the code. Hold down the option key and pull down the RUN menu. You will see the step-step option. Step-step walks through your source code one line at a time, stepping into functions and procedures. It’s like a guided tour through your own program. Hold down the option key and browse through the Think Pascal menus. You may be surprised how much the option key modifies in the menus.

- Lillian Thompson, Reno, Nevada

 

Community Search:
MacTech Search:

Software Updates via MacUpdate

Latest Forum Discussions

See All

Whitethorn Games combines two completely...
If you have ever gone fishing then you know that it is a lesson in patience, sitting around waiting for a bite that may never come. Well, that's because you have been doing it wrong, since as Whitehorn Games now demonstrates in new release Skate... | Read more »
Call of Duty Warzone is a Waiting Simula...
It's always fun when a splashy multiplayer game comes to mobile because they are few and far between, so I was excited to see the notification about Call of Duty: Warzone Mobile (finally) launching last week and wanted to try it out. As someone who... | Read more »
Albion Online introduces some massive ne...
Sandbox Interactive has announced an upcoming update to its flagship MMORPG Albion Online, containing massive updates to its existing guild Vs guild systems. Someone clearly rewatched the Helms Deep battle in Lord of the Rings and spent the next... | Read more »
Chucklefish announces launch date of the...
Chucklefish, the indie London-based team we probably all know from developing Terraria or their stint publishing Stardew Valley, has revealed the mobile release date for roguelike deck-builder Wildfrost. Developed by Gaziter and Deadpan Games, the... | Read more »
Netmarble opens pre-registration for act...
It has been close to three years since Netmarble announced they would be adapting the smash series Solo Leveling into a video game, and at last, they have announced the opening of pre-orders for Solo Leveling: Arise. [Read more] | Read more »
PUBG Mobile celebrates sixth anniversary...
For the past six years, PUBG Mobile has been one of the most popular shooters you can play in the palm of your hand, and Krafton is celebrating this milestone and many years of ups by teaming up with hit music man JVKE to create a special song for... | Read more »
ASTRA: Knights of Veda refuse to pump th...
In perhaps the most recent example of being incredibly eager, ASTRA: Knights of Veda has dropped its second collaboration with South Korean boyband Seventeen, named so as it consists of exactly thirteen members and a video collaboration with Lee... | Read more »
Collect all your cats and caterpillars a...
If you are growing tired of trying to build a town with your phone by using it as a tiny, ineffectual shover then fear no longer, as Independent Arts Software has announced the upcoming release of Construction Simulator 4, from the critically... | Read more »
Backbone complete its lineup of 2nd Gene...
With all the ports of big AAA games that have been coming to mobile, it is becoming more convenient than ever to own a good controller, and to help with this Backbone has announced the completion of their 2nd generation product lineup with their... | Read more »
Zenless Zone Zero opens entries for its...
miHoYo, aka HoYoverse, has become such a big name in mobile gaming that it's hard to believe that arguably their flagship title, Genshin Impact, is only three and a half years old. Now, they continue the road to the next title in their world, with... | Read more »

Price Scanner via MacPrices.net

B&H has Apple’s 13-inch M2 MacBook Airs o...
B&H Photo has 13″ MacBook Airs with M2 CPUs and 256GB of storage in stock and on sale for up to $150 off Apple’s new MSRP, starting at only $849. Free 1-2 day delivery is available to most US... Read more
M2 Mac minis on sale for $100-$200 off MSRP,...
B&H Photo has Apple’s M2-powered Mac minis back in stock and on sale today for $100-$200 off MSRP. Free 1-2 day shipping is available for most US addresses: – Mac mini M2/256GB SSD: $499, save $... Read more
Mac Studios with M2 Max and M2 Ultra CPUs on...
B&H Photo has standard-configuration Mac Studios with Apple’s M2 Max & Ultra CPUs in stock today and on Easter sale for $200 off MSRP. Their prices are the lowest available for these models... Read more
Deal Alert! B&H Photo has Apple’s 14-inch...
B&H Photo has new Gray and Black 14″ M3, M3 Pro, and M3 Max MacBook Pros on sale for $200-$300 off MSRP, starting at only $1399. B&H offers free 1-2 day delivery to most US addresses: – 14″ 8... Read more
Department Of Justice Sets Sights On Apple In...
NEWS – The ball has finally dropped on the big Apple. The ball (metaphorically speaking) — an antitrust lawsuit filed in the U.S. on March 21 by the Department of Justice (DOJ) — came down following... Read more
New 13-inch M3 MacBook Air on sale for $999,...
Amazon has Apple’s new 13″ M3 MacBook Air on sale for $100 off MSRP for the first time, now just $999 shipped. Shipping is free: – 13″ MacBook Air (8GB RAM/256GB SSD/Space Gray): $999 $100 off MSRP... Read more
Amazon has Apple’s 9th-generation WiFi iPads...
Amazon has Apple’s 9th generation 10.2″ WiFi iPads on sale for $80-$100 off MSRP, starting only $249. Their prices are the lowest available for new iPads anywhere: – 10″ 64GB WiFi iPad (Space Gray or... Read more
Discounted 14-inch M3 MacBook Pros with 16GB...
Apple retailer Expercom has 14″ MacBook Pros with M3 CPUs and 16GB of standard memory discounted by up to $120 off Apple’s MSRP: – 14″ M3 MacBook Pro (16GB RAM/256GB SSD): $1691.06 $108 off MSRP – 14... Read more
Clearance 15-inch M2 MacBook Airs on sale for...
B&H Photo has Apple’s 15″ MacBook Airs with M2 CPUs (8GB RAM/256GB SSD) in stock today and on clearance sale for $999 in all four colors. Free 1-2 delivery is available to most US addresses.... Read more
Clearance 13-inch M1 MacBook Airs drop to onl...
B&H has Apple’s base 13″ M1 MacBook Air (Space Gray, Silver, & Gold) in stock and on clearance sale today for $300 off MSRP, only $699. Free 1-2 day shipping is available to most addresses in... Read more

Jobs Board

Medical Assistant - Surgical Oncology- *Apple...
Medical Assistant - Surgical Oncology- Apple Hill Location: WellSpan Medical Group, York, PA Schedule: Full Time Sign-On Bonus Eligible Remote/Hybrid Regular Apply Read more
Omnichannel Associate - *Apple* Blossom Mal...
Omnichannel Associate - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Read more
Cashier - *Apple* Blossom Mall - JCPenney (...
Cashier - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Blossom Mall Read more
Operations Associate - *Apple* Blossom Mall...
Operations Associate - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Read more
Business Analyst | *Apple* Pay - Banco Popu...
Business Analyst | Apple PayApply now " Apply now + Apply Now + Start applying with LinkedIn Start + Please wait Date:Mar 19, 2024 Location: San Juan-Cupey, PR Read more
All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.