TweetFollow Us on Twitter

SuperPaint Plug-in
Volume Number:8
Issue Number:1
Column Tag:Pascal Workshop

Related Info: Color Quickdraw Memory Manager

Superpaint Airbrush Masking

A plug-in for creating & using masks

By Allen Stenger, Gardena, California

Note: Source code files accompanying article are located on MacTech CD-ROM or source code disks.

Introduction

The airbrushes and spray cans included in paint programs tend to spatter areas next to the one you want to paint, making it difficult to paint neatly. Artists using real airbrushes have the same problem, but solve it with masks and shields. A mask is a piece of acetate or similar material, cut to cover the areas to be protected from paint, and pasted to the surface. The artist paints the exposed area with the airbrush, then peels away the mask. A shield is similar, but it is held in one hand (instead of being pasted down) and moved around while the other hand paints with the airbrush.

This article gives a plug-in program for creating and using masks in SuperPaint.

Taking Liberties

Our masks are implemented by the slightly devious method of saving the area under the mask, then restoring it later to “peel off” the mask. This is a kind of cut and paste, and perhaps cut and paste could be used sometimes, although it is hard to control exactly where the pasted object goes.

You define a mask using a selection tool. When SuperPaint calls the plug-in, it describes the selection as a BitMap where the bit image has 1’s in the selected pixels (like CalcMask’s output). We store this BitMap as the mask, offsetting its boundsRect so that the mask is in document coordinates. (Selections made with the selection rectangle are not described this way; we get the Rect and make our own BitMap.) You also can cut out parts of the mask; this is handled the same way, except that we use CopyBits with the srcBic transfer mode to remove the cut-out area from the saved BitMap. Capturing the image under the mask is also done with CopyBits; restoring it uses CopyMask to restore only those pixels under the mask.

One drawback of using selection tools to define the mask is that the mask is invisible! To get around this I added a “Tint Mask” command that inverts all pixels under the mask. By first capturing the area under the mask, you can then tint the mask to see where you’re painting; restoring under the mask obliterates the tint.

SuperPaint painting commands are described formally as “Black and White transformation commands,” and typically transform an area on a single call rather than building up a transform across several calls, as we do here. There’s nothing wrong with our approach, although the interface is clumsy since you must always select something (usually an area containing the mask) for each call.

Example

This is an exercise from Vero’s book. Start by making the mask, which is an outline of the drop. Draw a Bezier in the Draw layer (I start with an oval and bend it into shape). Then cut this into the Paint layer.

First draw the shadow. Select the mask with the lasso, and command Outline A Mask. Open a new window, command Capture Under Mask, then Tint Mask. (Note that the Masker does not remember which window it was in.) Use the airbrush set for 25% flow, 4 pixels and faded to paint the shadow with a 50% gray. Be sure the boundary is well-defined; keep spraying until it is thick enough. Use the Command Restore Under Mask to check your progress. Now mask the outside of the drop by going back to the mask window, selecting the window (double-click on the selection rectangle), commanding Outline A Mask, then selecting the outline with the lasso and commanding Remove From Mask. Go back to the drop window, select the entire window, and command Capture Under Mask. Fill the window with 12.5% gray, then Restore Under Mask to get the drop. Paint the highlight with white, using a horizontal blade brush (1 x 8 pixels). Lighten the bottom edge of the drop with the airbrush set for 25% flow, 8 pixels and faded. Touch up with a white brush if needed.

Possible Improvements

I’ve tried to keep this program simple and therefore easily understandable. Some additional complications that you might want to add are:

• Allow addition of areas to the mask. This was omitted because it might require adjusting the size of the BitMap bounds, but it’s not especially difficult to do. (A neater way than using BitMaps would be to represent the mask as a region, using QuickDraw routines to add to and subtract from the mask. Unfortunately, there is no standard way to convert the BitMap passed to the plug-in by SuperPaint into a region.)

• Nudge or shift a mask after creation. A little thought is needed to devise a convenient human interface for commanding this, but the operation is simple (offset the boundsRect).

• Allow the user to set the Tint pattern (e.g., as the current fill pattern, which is also passed to the plug-in by SuperPaint).

• Form the complement of a mask. In physical terms this corresponds to cutting holes from a mask and using both the mask and the cut-out portions as masks. This can be done as in the example, but it would be easier to have a new command.

Notes

These are some miscellaneous notes that may be helpful in understanding the program.

• All the Pascal files BWtc.p included in the Toolkit omit the fillPatNone and linePatNone fields, causing all later fields to be at the wrong offset. (The C and Asm files are correct.) This is corrected in the BWtc.p listing below.

• An important correspondence (not mentioned in the Toolkit documentation) is that selectRect and the GrafPort’s portRect represent the same area; selectRect is in document coordinates and portRect is in local coordinates. This correspondence allows us to map between the current selection and the document’s coordinates.

• The statement in the Toolkit documentation that the GrafPort is set to the selection is not completely correct. More accurately, the GrafPort is set to an offscreen copy of part of the document containing the selection. After the plug-in runs, SuperPaint copies the offscreen version back into the selected portion of the document.

• The lassoMaskBits record is set correctly for all selection tools other than the rectangle. The Toolkit documentation implies it is only valid for selections made with the Lasso.

[Also note, after this article was submitted, Aldus released SuperPaint 3.0 presenting two problems. The first of which is that Aldus has evidently abandoned 2.0 plug-ins by redefining the interface and providing no support for earlier interfaces. Second, 3.0 has some masking features. For the many users, who are choosing to not move to 3.0 because it is so incredibly slow, this tool is still useful. More importantly, it shows the basic methodology to using “plug-in tools”. - Ed.]

For Further Reading

If you are interested in further information on this topic, you might want to look at the following sources.

• Radu Vero, Airbrush: The Complete Studio Handbook. Watson-Guptill Publications, 1983. A good introduction to airbrush work. The example is on page 74 (exercise 14).

• Michael Ogawa, “BitMapper Utility For SuperPaint.” MacTutor, February 1990, pp. 28-40. Another example of a paint com-mand for SuperPaint. One of three related articles in this issue.

• “SuperPaint Plug-In Developer’s Toolkit.” Distributed by Silicon Beach. Send $15 to Silicon Beach Software, Inc., P.O. Box 262460, Dept. 20, San Diego, CA 92126. One disk, containing much documentation, source files defining the interfaces, and examples.

• Macintosh Technical Note #193, “So Many Bitmaps, So Little Time,” December 1989. Describes a new trap, BitMapToRegion, which is included in 32-bit QuickDraw and available separately under license from Apple. The trap is also described in Inside Macintosh, v. VI, p. 17-25.

• Ted Cohn, “Convert PICTs to Regions.” MacTutor, June 1989 (reprinted in Best of MacTutor v. 5, pp. 11-16). Gives routines for converting BitMaps and PICTs to regions.

About the author

Allen Stenger is a programmer for a large metropolitan radar house. He may be reached on AppleLink at “STENGER”.

Source Listings

Your first step is to set up a new THINK Pascal project that should look like the one in Figure 1.

Figure 1: THINK Pascal Project Window

Remember, you are writing a code resource here, so you will need to set the project type as in Figure 2.

Figure 2: Set Project Type Dialog

Listing:  BWtc.p
{File: BWtc.p}

{COPYRIGHT © 1989 Silicon Beach Software, Inc.}
{All Rights Reserved}

{ Modified by Allen Stenger, July 1991, to add }
{ missing fields fillPatNone, linePatNone }


unit BWtc;

interface

 const
 PaintOpaque = patCopy;
 PaintTransparent = patOr;
 PaintOnBlack = notPatBic;
 InvertPaint = patXor;

 { toolAbout return codes }
 noAbout = 1;
 textAbout = 2;

 {Command codes}
 menuAbout = 0;
 menuOptions = 10;
 menuSelected = 11;

 verNum = $0001;

 type

 MenuOptionsRec = record
 UsesScratch: boolean;
 end;

 MenuOptionsPtr = ^MenuOptionsRec;

 MenuDataRec = record
 toolID: integer;
 spare1: integer;
 spare2: integer;
 spare3: integer;
 spare4: integer;
 spare5: integer;
 spare6: integer;
 spare7: integer;
 shiftIsDown: boolean;
 cmdIsDown: boolean;
 optIsDown: boolean;
 spareFlag: boolean;
 fillPatNone: boolean;
 linePatNone: boolean;
 subMenu: MenuHandle;
 MenuItem: integer;
 scratchBits: BitMap;
 lassoMaskBits: BitMap;
 undoBits: BitMap; { ptr to undo bits }
 selectRect: Rect; { selection rectangle }
 { in document coords }
 curFillPat: Pattern;{ cur fill pattern }
 curPatList: Handle; { handle to currently }
 { selected pattern list}
 end;

 MenuDataPtr = ^MenuDataRec;

implementation

end.
Listing:  Masker.p
{-----------------------  }
{}
{Airbrush masker for SuperPaint 2.0a }
{}
{Written in THINK Pascal version 3.0.2 }
{}
{Allen Stenger   July 1991}
{}
{-----------------------  }

unit Masker;

interface
 uses
 BWtc;

 const

 { returnCode values for errors (we return any }
 { Memory Manager error codes as themselves)   }
 BadSelector = 1;  { bad selector value }
 InvalidSubMenu = 2; { unimplemented submenu }
 { selection }
 MaskNotInSelection = 3;  { attempt mask }
 { operation with mask not }
 { totally in selection }
 { equates for submenu selections }
 OutlineAMask = 1; { make current selection the }
 { mask }
 RemoveFromMask = 2; { remove cur selection }
 { from mask }
 { separator line = 3 }
 CaptureUnderMask = 4;    { save portion of }
 { document under mask }
 RestoreUnderMask = 5;    { restore saved data }
 { to document }
 { separator line = 6 }
 TintMask = 7    { tint mask area so we can }
 { see it }
 ForgetMask = 8; { discard all mask and saved }
 { data }

 type
 SaveArea = record { area saved by SuperPaint }
 { for us as globalData^^ }
 MaskBitMap: BitMap; { the mask, a BitMap, }
 { always maintained in }
 { document coordinates }
 SavedBitMap: BitMap;{ saved part of orig }
 { image, always maintained }
 { in document coordinates }
 Tinted: Boolean;{ mask currently tinted? }
 end;
 SaveAreaPtr = ^SaveArea;
 SaveAreaHandle = ^SaveAreaPtr;

 procedure Main (selector: integer;
 mDataPtr: MenuDataPtr;
 var globalData: SaveAreaHandle;
 var returnCode: integer);

implementation

 procedure Main;

 { look up the save area preserved by SuperPaint, }
 { or create a new one if none }
 function GetSaveArea: OSErr;
 var
 ourReturnCode: OSErr;  {holds value for GetSaveArea}
 begin
 ourReturnCode := noErr;
 if globalData = nil then
 begin
 globalData := SaveAreaHandle(NewHandle(sizeof(SaveArea)));
 ourReturnCode := MemError;
 if ourReturnCode = noErr then
 with globalData^^, globalData^^.MaskBitMap do
 begin
 baseAddr := nil;
 rowBytes := 0;
 SetRect(bounds, 0, 0, 0, 0);
 SavedBitMap := MaskBitMap;
 Tinted := false;
 end;
 end; {if globalData}
 GetSaveArea := ourReturnCode;
 end; {GetSaveArea}

 { release save area and storage it references }
 function DisposSaveArea: OSErr;
 var
 ourReturnCode: OSErr;  { holds function val }
 begin
 ourReturnCode := noErr;
 if globalData <> nil then
 begin
 with globalData^^.MaskBitMap do
 if baseAddr <> nil then
 begin
 DisposPtr(baseAddr);
 ourReturnCode := MemError;
 end;
 with globalData^^.SavedBitMap do
 if (ourReturnCode = noErr) and (baseAddr <> nil) then
 begin
 DisposPtr(baseAddr);
 ourReturnCode := MemError
 end;
 if ourReturnCode = noErr then
 begin
 DisposHandle(Handle(globalData));
 ourReturnCode := MemError
 end;
 end;
 globalData := nil;
 DisposSaveArea := ourReturnCode;
 end; {DisposSaveArea}

 { Create a bit mask in outRect within the new  }
 { BitMap outBitMap by copying the mask in inRect }
 { within inBitMap; or by filling outRect if }
 { inBitMap is null.}
 function CopyBitMask (inBitMap: BitMap;
 var outBitMap: BitMap;
 inRect, outRect: Rect): OSErr;
 var
 ourReturnCode: OSErr;  { holds value of }
 { CopyBitMask}
 il: longint;    { loop control }
 bitsSize: longint;{ size of bit array in }
 { bytes }
 byteP: PTR;{ temporary byte ptr }

 begin
 { make a new BitMap the right size to hold the mask }
 outBitMap.bounds := outRect;
 with outBitMap, outBitMap.bounds do
 begin
 rowBytes := ((right - left + 7) div 8 + 1) div 2 * 2;
 bitsSize := rowBytes * LONGINT(bottom - top);
 baseAddr := NewPtr(bitsSize);
 ourReturnCode := MemError;
 end;

 { blit the mask into the new BitMap }
 if ourReturnCode = noErr then
 if inBitMap.baseAddr <> nil then
 with outBitMap, outBitMap.bounds do
 CopyBits(inBitMap, outBitMap, inRect, bounds, srcCopy, nil)
 else
 with outBitMap do
 for il := 0 to bitsSize - 1 do
 begin
 byteP := PTR(ORD(baseAddr) + il);
 byteP^ := 255;
 end; {for il}

 CopyBitMask := ourReturnCode;
 end; {CopyBitMask}

 { convert r from Document to GrafPort (local) }
 { coordinates }
 procedure DocToGraf (r: Rect;
 gPtr: GrafPtr);
 begin
 with mDataPtr^, gPtr^ do
 OffsetRect(r, -(selectRect.left - portRect.left), -(selectRect.top - 
portRect.top));
 end; {DocToGraf}

 { Flip (i.e. XOR) the tint of the mask }
 procedure FlipTint (gPtr: GrafPtr);
 var
 workRect: Rect; { temp Rectangle }
 begin
 workRect := globalData^^.MaskBitMap.bounds;
 DocToGraf(workRect, gPtr);
 CopyBits(globalData^^.MaskBitMap, gPtr^.portBits, globalData^^.MaskBitMap.bounds, 
workRect, srcXor, nil);
 end; {FlipTint}

 { execute the desired action from the menu }
 procedure TakeAction;
 var
 i: integer;{ loop control }
 gPtr: GrafPtr;  { points to current }
 { GrafPort }
 workRect: Rect; { temporary working }
 { rectangle }
 bitsSize: longint;{ size of bit array }
 { in bytes }
 workBitMap: BitMap; { temporary bit map }
 trashB: Boolean;{ temporary Boolean }

 begin
 GetPort(gPtr);

 case mDataPtr^.menuItem of
 OutlineAMask, ForgetMask: 
 begin
 returnCode := DisposSaveArea;
 if returnCode = noErr then
 returnCode := GetSaveArea
 end;
 otherwise
 returnCode := GetSaveArea;
 end; {case mDataPtr^.menuItem}

 if returnCode = noErr then
 case mDataPtr^.menuItem of

 OutlineAMask: 
 begin
 returnCode := CopyBitMask(mDataPtr^.lassoMaskBits, globalData^^.MaskBitMap, 
gPtr^.portRect, mDataPtr^.selectRect);
 end; {OutlineAMask}

 RemoveFromMask: 
 begin
 returnCode := CopyBitMask(mDataPtr^.lassoMaskBits, workBitMap, gPtr^.portRect, 
mDataPtr^.selectRect);
 if returnCode = noErr then
 begin
 workRect := workBitMap.bounds;
 if globalData^^.Tinted then
 FlipTint(gPtr); { remove Tint where }
 { mask will be removed}
 CopyBits(workBitMap, globalData^^.MaskBitMap, workRect, workRect, srcBic, 
nil);
 DisposPtr(workBitMap.baseAddr);
 returnCode := MemError;
 workBitMap.baseAddr := nil;
 end  {if returnCode}
 end; {RemoveFromMask}

 CaptureUnderMask: 
 begin
 { Quick and dirty check to see }
 {if user’s selection includes the mask area. }
 { A better check would check that all }
 { bits in MaskBitMap are in lassoMaskBits. }
 trashB := SectRect(mDataPtr^.selectRect, globalData^^.MaskBitMap.bounds, 
workRect);
 if not EqualRect(workRect, globalData^^.MaskBitMap.bounds) then
 returnCode := MaskNotInSelection
 else
 begin
 with globalData^^, globalData^^.SavedBitMap do
 begin
 if baseAddr <> nil then
 DisposPtr(baseAddr);{ discard any }
 { previous capture }
 SavedBitMap := MaskBitMap;
 baseAddr := NewPtr(GetPtrSize(MaskBitMap.baseAddr));
 returnCode := MemError;
 if returnCode = noErr then
 begin
 workRect := bounds;
 DocToGraf(workRect, gPtr);
 CopyBits(gPtr^.portBits, SavedBitMap, workRect, bounds, srcCopy, nil);
 end; {if returnCode}
 end; {with globalData^^}
 end; {if not EqualRect}
 end; {CaptureUnderMask}

 RestoreUnderMask: 
 begin
 workRect := globalData^^.SavedBitMap.bounds;
 DocToGraf(workRect, gPtr);
 with globalData^^, gPtr^ do
 CopyMask(SavedBitMap, MaskBitMap, portBits, SavedBitMap.bounds, MaskBitMap.bounds, 
workRect);
 globalData^^.Tinted := false;{we obliterated tint}
 returnCode := noErr;
 end; {RestoreUnderMask}

 TintMask: 
 begin
 FlipTint(gPtr);
 with globalData^^ do
 Tinted := not Tinted;
 returnCode := noErr;
 end; {TintMask}

 ForgetMask: 
 begin
 returnCode := noErr;
 end; {ForgetMask}

 otherwise
 returnCode := InvalidSubMenu;

 end; {case mDataPtr^.subMenu}

 end; {TakeAction}

 { update valid menu selections }
 procedure UpdateMenu;
 begin
 with globalData^^, mDataPtr^ do
 begin
 if MaskBitMap.baseAddr = nil then
 begin
 DisableItem(subMenu, RemoveFromMask);
 DisableItem(subMenu, CaptureUnderMask);
 DisableItem(subMenu, TintMask);
 DisableItem(subMenu, ForgetMask)
 end
 else
 begin
 EnableItem(subMenu, RemoveFromMask);
 EnableItem(subMenu, CaptureUnderMask);
 EnableItem(subMenu, TintMask);
 EnableItem(subMenu, ForgetMask)
 end;
 if SavedBitMap.baseAddr = nil then
 DisableItem(subMenu, RestoreUnderMask)
 else
 EnableItem(subMenu, RestoreUnderMask);
 if Tinted then
 DisableItem(subMenu, CaptureUnderMask);
 CheckItem(subMenu, TintMask, Tinted);
 end; {with globalData^^}
 end; {UpdateMenu}

 begin {Main}
 case selector of

 menuAbout: 
 begin
 returnCode := textAbout;
 {our About  is in TEXT resource}
 end;

 menuOptions: 
 begin
 MenuOptionsPtr(mDataPtr)^.usesScratch := false;
 {we don’t use scratch area}
 returnCode := noErr;
 end;

 menuSelected: 
 begin
 TakeAction;
 UpdateMenu;
 if returnCode <> noErr then
 SysBeep(1);
 { SuperPaint doesn’t notify user of error, }
 { so we will}
 end;

 otherwise
 begin
 returnCode := BadSelector
 end;

 end; {case selector of}

 end; {Main}

end.
Listing:  Masker.r
/*------------------------------------------- */
/* Resource definition file (Rez) for Masker  */
/* Allen Stenger    July 1991                 */
/*------------------------------------------- */

/* This SICN appears in the About  plug-in list. */
resource ‘SICN’ (16000, purgeable) {
 { /* array: 1 elements */
 /* [1] */
 $”0780 1FE0 3870 E01C 8004 BFF4 E31C EB5C”
 $”A314 BFF4 8004 8004 8004 FFFC 1860 1860”
 }
};

/* This resource defines the interface version */
data ‘PiMI’ (16000, purgeable, preload) {
 $”0001”               
};

/* This menu is shown an a hierarchical menu to */
/* the Masker command. */
resource ‘MENU’ (16000, purgeable) {
 128,
 textMenuProc,
 0x7FFFFF01,
 enabled,
 “Masker”,
 { /* array: 8 elements */
 /* [1] */
 “Outline a Mask”, noIcon, noKey, noMark, plain,
 /* [2] */
 “Remove from Mask”, noIcon, noKey, noMark, plain,
 /* [3] */
 “-”, noIcon, noKey, noMark, plain,
 /* [4] */
 “Capture under Mask”, noIcon, noKey, noMark, plain,
 /* [5] */
 “Restore under Mask”, noIcon, noKey, noMark, plain,
 /* [6] */
 “-”, noIcon, noKey, noMark, plain,
 /* [7] */
 “Tint Mask”, noIcon, noKey, noMark, plain,
 /* [8] */
 “Forget Mask”, noIcon, noKey, noMark, plain
 }
};

/* This text is shown as the About  info for Masker. */
data ‘TEXT’ (16000, “About ”, purgeable) {
“Masker Menu Command - Written by Allen “
“Stenger, July 1991\n\n”
“Use this command to protect an area from “
“being painted over. The steps are:\n”
“  1. Define the “mask” by selecting the “
“area to be protected with any of the “ 
“selection tools, then command Outline “
“A Mask. Pieces may then be cut from the “
“mask by selecting them and commanding “
“Remove From Mask.\n”
“  2. Save the area under the mask by “
“selecting an area containing the mask “ 
“and commanding Capture Under Mask.\n”
“  3. Paint as desired.\n”
“  4. Restore the area under the mask by “
“selecting an area containing the mask “
“and commanding Restore Under Mask.\n\n”
“The Tint Mask command tints the mask “
“so it can be seen. Issue Tint Mask “
“again to remove the tint. Capture “
“is disabled while Tint is on, to “
“prevent the tint from being captured too.\n\n”
“The Forget Mask command is not normally “
“needed, since Outline A Mask will clear “
“the previous mask; it may be used to “
“release the memory occupied by a mask.\n\n”
“Menu commands can only work on areas “
“within the current selection, so be sure “
“the entire area of the mask is selected “
“before Tint, Capture, or Restore.”
};
 

Community Search:
MacTech Search:

Software Updates via MacUpdate

Latest Forum Discussions

See All

Whitethorn Games combines two completely...
If you have ever gone fishing then you know that it is a lesson in patience, sitting around waiting for a bite that may never come. Well, that's because you have been doing it wrong, since as Whitehorn Games now demonstrates in new release Skate... | Read more »
Call of Duty Warzone is a Waiting Simula...
It's always fun when a splashy multiplayer game comes to mobile because they are few and far between, so I was excited to see the notification about Call of Duty: Warzone Mobile (finally) launching last week and wanted to try it out. As someone who... | Read more »
Albion Online introduces some massive ne...
Sandbox Interactive has announced an upcoming update to its flagship MMORPG Albion Online, containing massive updates to its existing guild Vs guild systems. Someone clearly rewatched the Helms Deep battle in Lord of the Rings and spent the next... | Read more »
Chucklefish announces launch date of the...
Chucklefish, the indie London-based team we probably all know from developing Terraria or their stint publishing Stardew Valley, has revealed the mobile release date for roguelike deck-builder Wildfrost. Developed by Gaziter and Deadpan Games, the... | Read more »
Netmarble opens pre-registration for act...
It has been close to three years since Netmarble announced they would be adapting the smash series Solo Leveling into a video game, and at last, they have announced the opening of pre-orders for Solo Leveling: Arise. [Read more] | Read more »
PUBG Mobile celebrates sixth anniversary...
For the past six years, PUBG Mobile has been one of the most popular shooters you can play in the palm of your hand, and Krafton is celebrating this milestone and many years of ups by teaming up with hit music man JVKE to create a special song for... | Read more »
ASTRA: Knights of Veda refuse to pump th...
In perhaps the most recent example of being incredibly eager, ASTRA: Knights of Veda has dropped its second collaboration with South Korean boyband Seventeen, named so as it consists of exactly thirteen members and a video collaboration with Lee... | Read more »
Collect all your cats and caterpillars a...
If you are growing tired of trying to build a town with your phone by using it as a tiny, ineffectual shover then fear no longer, as Independent Arts Software has announced the upcoming release of Construction Simulator 4, from the critically... | Read more »
Backbone complete its lineup of 2nd Gene...
With all the ports of big AAA games that have been coming to mobile, it is becoming more convenient than ever to own a good controller, and to help with this Backbone has announced the completion of their 2nd generation product lineup with their... | Read more »
Zenless Zone Zero opens entries for its...
miHoYo, aka HoYoverse, has become such a big name in mobile gaming that it's hard to believe that arguably their flagship title, Genshin Impact, is only three and a half years old. Now, they continue the road to the next title in their world, with... | Read more »

Price Scanner via MacPrices.net

B&H has Apple’s 13-inch M2 MacBook Airs o...
B&H Photo has 13″ MacBook Airs with M2 CPUs and 256GB of storage in stock and on sale for up to $150 off Apple’s new MSRP, starting at only $849. Free 1-2 day delivery is available to most US... Read more
M2 Mac minis on sale for $100-$200 off MSRP,...
B&H Photo has Apple’s M2-powered Mac minis back in stock and on sale today for $100-$200 off MSRP. Free 1-2 day shipping is available for most US addresses: – Mac mini M2/256GB SSD: $499, save $... Read more
Mac Studios with M2 Max and M2 Ultra CPUs on...
B&H Photo has standard-configuration Mac Studios with Apple’s M2 Max & Ultra CPUs in stock today and on Easter sale for $200 off MSRP. Their prices are the lowest available for these models... Read more
Deal Alert! B&H Photo has Apple’s 14-inch...
B&H Photo has new Gray and Black 14″ M3, M3 Pro, and M3 Max MacBook Pros on sale for $200-$300 off MSRP, starting at only $1399. B&H offers free 1-2 day delivery to most US addresses: – 14″ 8... Read more
Department Of Justice Sets Sights On Apple In...
NEWS – The ball has finally dropped on the big Apple. The ball (metaphorically speaking) — an antitrust lawsuit filed in the U.S. on March 21 by the Department of Justice (DOJ) — came down following... Read more
New 13-inch M3 MacBook Air on sale for $999,...
Amazon has Apple’s new 13″ M3 MacBook Air on sale for $100 off MSRP for the first time, now just $999 shipped. Shipping is free: – 13″ MacBook Air (8GB RAM/256GB SSD/Space Gray): $999 $100 off MSRP... Read more
Amazon has Apple’s 9th-generation WiFi iPads...
Amazon has Apple’s 9th generation 10.2″ WiFi iPads on sale for $80-$100 off MSRP, starting only $249. Their prices are the lowest available for new iPads anywhere: – 10″ 64GB WiFi iPad (Space Gray or... Read more
Discounted 14-inch M3 MacBook Pros with 16GB...
Apple retailer Expercom has 14″ MacBook Pros with M3 CPUs and 16GB of standard memory discounted by up to $120 off Apple’s MSRP: – 14″ M3 MacBook Pro (16GB RAM/256GB SSD): $1691.06 $108 off MSRP – 14... Read more
Clearance 15-inch M2 MacBook Airs on sale for...
B&H Photo has Apple’s 15″ MacBook Airs with M2 CPUs (8GB RAM/256GB SSD) in stock today and on clearance sale for $999 in all four colors. Free 1-2 delivery is available to most US addresses.... Read more
Clearance 13-inch M1 MacBook Airs drop to onl...
B&H has Apple’s base 13″ M1 MacBook Air (Space Gray, Silver, & Gold) in stock and on clearance sale today for $300 off MSRP, only $699. Free 1-2 day shipping is available to most addresses in... Read more

Jobs Board

Medical Assistant - Surgical Oncology- *Apple...
Medical Assistant - Surgical Oncology- Apple Hill Location: WellSpan Medical Group, York, PA Schedule: Full Time Sign-On Bonus Eligible Remote/Hybrid Regular Apply Read more
Omnichannel Associate - *Apple* Blossom Mal...
Omnichannel Associate - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Read more
Cashier - *Apple* Blossom Mall - JCPenney (...
Cashier - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Blossom Mall Read more
Operations Associate - *Apple* Blossom Mall...
Operations Associate - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Read more
Business Analyst | *Apple* Pay - Banco Popu...
Business Analyst | Apple PayApply now " Apply now + Apply Now + Start applying with LinkedIn Start + Please wait Date:Mar 19, 2024 Location: San Juan-Cupey, PR Read more
All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.