TweetFollow Us on Twitter

Doodats
Volume Number:5
Issue Number:9
Column Tag:C Workshop

Three Doodats

By Lee A. Neuse, Manassas, VA

Note: Source code files accompanying article are located on MacTech CD-ROM or source code disks.

[Lee Neuse started in the days you built them before programmed them. He was lured away from IBM compatibles to the Mac in 1982 and been there ever since. Currently, he is working for Computer Science Corporation designing and implementing Mac software as part of CSC research. His Mousehole handle is "Noisy".]

Three Doodats

Doodat -- a trivial problem guaranteed to make a programmer’s life miserable; from the expression “How did he do dat?”.

It seems like every programmer, at one time or another, is faced with the same dilemma: wanting to use a feature in a program, but not wanting to spend the time to figure out the technique. For example, we all know that a Balanced B-Tree index is wonderfully efficient, but how many of us really want to sit down and write the code? One solution is to start reading back issues of MacTutor, hoping that some kind soul has already published useable source code. Another is to scour public domain software for an author willing to impart knowledge in exchange for a shareware donation. Either way, it’s usually faster (and easier) to find and adapt someone else’s code instead of doing it yourself.

The purpose of ‘Doodats’ is to provide generic solutions to the little problems, so the programmer can spend his or her time working on the big problems (like what the program does).

Doodat #1

Problem: how to determine if the user has tried to abort something by pressing the Cmd-’.’ keys. EventAvail() returns only the first keystroke event in the queue, and the user may have pressed some other keys since the last keystroke event was read by the application. Either GetNextEvent() or WaitNextEvent() return all keystroke events, forcing the application to store them or ignore them (a Bad Thing). Moreover, if MultiFinder is running, calling any of these event-related traps may cause the application to be switched out, which could cause problems.

Solution: Doodat #1 is a routine called check_abort(), which directly scans the ToolBox’s internal event queue for Cmd-’.’ abort events.

The routine starts by setting a pointer to head of the event queue (stored in the system global EventQueue), then examining the next event in the queue. If the event is a Cmd-’.’ event, it is removed by calling Dequeue(), and the ‘found’ flag set. If the pointer does not match the event queue tail, it is advanced to the next event, otherwise, the function returns. This technique solves all of the problems posed by normal event processing:

1. It doesn’t affect any other keystroke events in the queue.

2. If the user has generated multiple aborts (by holding the keys down), it removes all of them.

3. It does not call EventAvail() or WaitNextEvent(), so no chance of being switched in or out under MultiFinder.

To use check_abort(), call it from within any place where the user might want to abort. For example:

/* 1 */

for (page = 1; page < last_page; page++)
 {
 /* print a page */
 if (check_abort())
 break;
 }

/*************************************************
**
** check_abort() - Lightspeed C Version
**
** This routine returns scans the low-level
** event queue in search of a Cmd-’.’ key event
** Each one found is removed from the event
** queue.
**
** In:  N/A
**
** Out: TRUE if Cmd-’.’ found, FALSE otherwise.
**
*/

Boolean
check_abort()
{
EvQElPtreq_p;
Boolean f_found = false;

/* start at head of internal queue */
eq_p = (EvQElPtr)(EventQueue.qHead);

while (true)
 {
 if ((eq_p->evtQWhat == keyDown ||
 (eq_p->evtQWhat == autoKey) &&
 (eq_p->evtQModifiers & cmdKey) &&
 (eq_p->evtQMessage & charCodeMask) == ‘.’)
 {
/* remove the event from the queue */
 Dequeue((QElemPtr)eq_p, &EventQueue);
 f_found = true;
 }
/* test for end of queue */
 if (eq_p == (EvQElPtr)EventQueue.qTail)
 break;

/* continue with next queue entry */
 eq_p = (EvQEl *)(eq_p->qLink);
 }
return(f_found);
}/* end of check_abort() */

Doodat #2

Problem: Many windows contain items such as lines, icons, pictures, or text strings that are there for decoration; these items don’t change in appearance, and clicking on them has no effect. While the code to draw these items is relatively simple, it is also very boring to write, and frequently quite lengthy. In addition, trying to figure out exactly which horizontal and vertical co-ordinates to use can be time-consuming and frustrating.

Solution: Doodat #2 is an attempt to save time (and code!) by making ResEdit and the Resource Manager do most of the work. This involves a two-step approach:

Step 1 is to use ResEdit (or any other Resource tool) to create a ‘DITL’ resource (Dialog Item List) that contains all of the items desired. ResEdit is particularly handy, as the items can be arranged visually within the window. The DITL resource may be created and edited normally, with all items being set to disabled. No Control or EditText items should be included (they will be ignored if you do), and the items may be in any order. The finished DITL resource is then included in the application’s resources for later use.

UserItems in the item list are handled in one of two ways: either as a dividing line or as frame. If the horizontal or vertical co-ordinates are equal, i.e. the boundary rectangle is empty, it is drawn as a 50% gray line. If the rectangle is not empty, it is drawn as a black frame.

Text items are drawn (left-justified) in whatever font the window’s port is using when draw_ditl() is called. Different text characteristics could be supplied by reserving the first few characters of the text string but that’s for another time.

Step 2 is to use the routine below called draw_ditl() to actually read in and draw the items within the window. This routine accepts the ID number of a DITL resource, reads the resource into memory, then traverses the item list, drawing each item accordingly. For draw_ditl() to work properly, the DITL resource must be present in the application’s resource fork (or in an open resource file), and the port set to the desired window.

draw_ditl() uses the following definitions and structure:

/* 2 */

#define NIL 0L

/* Test a pointer for validity */
#define VALID_PTR(p) ((long)(p) &&
 ((long)(p) & 1L) == NIL)

/* Test a handle for validity */
#define VALID_HNDL(h)(VALID_PTR(h) &&
 VALID_PTR((long)(*(h)) & 0x00FFFFFF))

typedef struct
 {
 Handle hndl;
 Rect   frame;
 unsigned char   type;
 unsigned char   length;
 short  data[];
 } ditl_list;

/*************************************************
**
** draw_ditl() - Lightspeed C Version
**
** This routine reads in and draws the items in a
** Dialog Item List (DITL) resource.
**
** In:  resource id of DITL
**
** Out: N/A
**
*/

void
draw_ditl(ditl_id)
short   ditl_id;
{
Handle  ditl_h;
ditl_list *ditl_p;
PenStatesave_pen;
short   d_type, offset, num_items;

ditl_h = GetResource(‘DITL’, ditl_id);
if (ResError() != noErr || !VALID_HNDL(ditl_h))
 return;

HLock(ditl_h);
/* don’t change pen behind the window’s back */
GetPenState(&save_pen);
PenNormal();
/* get the number of items in list */
num_items = *((short *)(*ditl_h)) + 1;
/* set pointer to first item in list */
ditl_p = (ditl_list *)((*ditl_h) + sizeof(short));
while  (num_items--)
 {
/* mask out the item disabled bit */
 switch (ditl_p->type & 0x7F)
 {
 case statText:
 TextBox((char *)ditl_p->data,
 ditl_p->length, &(ditl_p->frame),
 teJustLeft);
 break;
 
 case iconItem:
 ditl_p->hndl =
 GetIcon(ditl_p->data[0]);
 if (VALID_HNDL(ditl_p->hndl))
 {
 PlotIcon(&(ditl_p->frame),
 ditl_p->hndl);
 ReleaseResource(ditl_p->hndl);
 }
 break;
 
 case picItem:
 ditl_p->hndl = GetResource(‘PICT’,
 ditl_p->data[0]);
 if (VALID_HNDL(ditl_p->hndl))
 {
 DrawPicture((PicHandle)ditl_p->hndl,
 &(ditl_p->frame));
 ReleaseReource(ditl_p->hndl);
 }
 break;
 
 case userItem:
 if (EmptyRect(&(ditl_p->frame)))
 {
 PenPat(gray);
 MoveTo(ditl_p->frame.left,
 ditl_p->frame.top);
 LineTo(ditl_p->frame.right,
 ditl_p->frame.bottom);
 PenPat(black);
 }
 else
 FrameRect(&(ditl_p->frame));
 break;
 }
/* force offset to a word (even) boundary */
 if ((offset = ditl_p->length) & 1)
 offset++;
/* advance pointer to next item */
 ditl_p = (ditl_list *)((char *)ditl_p +
 sizeof(ditl_list) + offset);
 }

HUnlock(ditl_h);
ReleaseResource(ditl_h);
/* restore pen to original condition */
SetPenState(&save_pen);
}/* end of draw_ditl() */

Doodat #3

Problem: Sooner or later, an application is going to need to access a data file of some sort, with fixed-length or variable-length records, keys, and so forth. Using the Resource Manager as a Poor Man’s Database is a Bad Thing according to Apple, and not everyone can afford (or write) a full ISAM (Indexed Sequential Access Method) utility.

Solution: Doodat #3, which includes some primitive (but useful) indexing routines. If used properly, they can be used for indexing files, arrays, or be used for look-up tables, etc.

All of the routines are based on the idea of a simple index, made up of 1-n index entries. Each index entry is a key value and it’s associated data value, and is defined in the index_entry structure below. The key and data values are always handled in pairs: for any given key, there is only one data value (provided it exists). Duplicate keys are not allowed, and both key and data values are limited to numeric values. What the key and data values actually represent depends on the application, an obvious example would be relating a part number to an offset into a file.

Several different indices can be manipulated using the same routines, it is the application’s responsibility to determine which index to use. If the indexes are small and/or few in number, they could be manually rebuilt each time the application is executed. Alternately, they could be saved between sessions, either as data files, or as resources: all that is needed the memory block referenced by the index handle (use GetHandleSize() to find it’s size). An elegant solution would be to save any or all data file indices as resources in the data file’s resource fork, but that would limit the index size to 32K.

Adding a new key to an index (or updating an existing key) is done by the db_insert_key() function: a pointer to the index handle, a key value, and the data value associated with the key are all passed as parameters. If the index handle is NIL, a new handle is allocated, otherwise, the index is expanded by one index entry, and the new key added to the index in ascending order. If the key value already exists in the index, the data value is updated with the new value.

Once an index has keys inserted into it, db_get_key() can be used to search the index for a given key value. The routine expects an index handle and a key value, then performs a binary search on the index. If the key value is found, the data value associated with the key is returned, otherwise -1 is returned to signal failure.

There may be times when it is necessary to find a key’s location in the index, thus db_get_seq_key() accepts an index handle and an entry number, then returns the key value found at that entry. Once again, -1 is returned to signal failure if the entry number is less than 1 or greater than the number of keys. This routine can be used to sequentially read through an index (in ascending order), using the following code:

/* 3 */

long  w_key, key_value;

w_key = 1L;
while (true)
 {
 key_value = db_get_seq_key(my_index, w_key++);
 if (key_value == -1L)
 break;

 my_data = db_get_key(my_index, key_value);
/*
** process my_data here
*/
 }

Some possible extensions to these routines include modifying them to store a character pointer as the key, providing non-numeric keys. For small indexes, the entire data record could be embedded as part of the index_entry structure, and a pointer to the structure returned by db_get_key().

The routines db_get_key(), db_get_seq_key(), and db_insert_key() all utilize the following definitions and structure:

/* 4 */

#define NIL 0L
/* Test a pointer for validity */
#define VALID_PTR(p) ((long)(p) &&
 ((long)(p) & 1L) == NIL)

/* Test a handle for validity */
#define VALID_HNDL(h)(VALID_PTR(h) &&
 VALID_PTR((long)(*(h)) & 0x00FFFFFF))

typedef struct
 {
 unsigned long   key;
 unsigned long   data;
 } index_entry;

/************************************************
**
** db_get_key()
**
** This routine performs a binary search on a
** list of index entries
**
** In:  index_hndl Handle to index
** target key value to find
**
** Out: -1 if NOT found, data value otherwise
**
*/

long
db_get_key(index_hndl, target)
Handle  index_hndl;
register long  target;
{
register index_entry *i_ptr;
register long    mid, low, high;

if (VALID_HNDL(index_hndl))
 {
 low = 1L;
 high = GetHandleSize(index_hndl) /
 sizeof(index_entry);

 while (low <= high)
 {
/* calculate the mid point of list */
 mid = ((low + high) >> 1) - 1;
 i_ptr = *index_hndl + (mid *
 sizeof(index_entry));

 if (i_ptr->key > target)
/* too big, so look in lower half  */
 high = mid;
 else if (i_ptr->key < target)
/* too small, so look in upper half */
 low = mid + 2;
 else
/* hmmm, guess we found it  */
 return(i_ptr->data);
 }
 }
return(-1L);
}/* end of db_get_key() */

/************************************************
**
** db_get_seq_key()
**
** This routine reads a list of index entries,
** returning a key based on a sequential number
**
** In:  index_hndl Handle to index
** key_numkey number to return
**
** Out: -1 if NOT found, key value otherwise
**
*/

long db_get_seq_key(index_hndl, key_num)
Handle  index_hndl;
short   key_num;
{
index_entry *i_ptr;
long    result = -1L;
short   num_keys;

if (VALID_HNDL(index_hndl)
 {
/* count number of keys in index */
 num_keys = GetHandleSize(index_hndl) /
 sizeof(index_entry);
 if (--key_num < num_keys)
 {
/* calculate offset into the index */
 i_ptr = *index_hndl + (key_num *
 sizeof(index_entry));
 result = i_ptr->key;
 }
 }

return(result);
}/* end of db_get_seq_key() */

/************************************************
**
** db_insert_key()
**
** This routine inserts a key into an index.
**
** In:  index_hndl Handle to index
** target key value to insert
** data data value associated
** with the key
**
** Out: N/A
*/

void
db_insert_key(index_hndl, target, data)
Handle  *index_hndl;
long    target;
long    data;
{
register index_entry *i_ptr, *n_ptr;
register long    mid, low, high, i_size;

/* empty list is special case! */
if (!VALID_HNDL(*index_hndl))
 {
/* allocate new handle */
 *index_hndl = NewHandle(sizeof(index_entry));
 ((index_entry *)(**index_hndl))->key = target;
 ((index_entry *)(**index_hndl))->data = data;
 }
else
 {
 low = 1L;
 high = i_size = GetHandleSize(*index_hndl) /
 sizeof(index_entry);

 while (low <= high)
 {
/* calculate the mid point of list */
 mid = ((low + high) >> 1) - 1;
 i_ptr = *index_hndl + (mid *
 sizeof(index_entry));

 if (i_ptr->key > target)
/* too big, so look in lower half */
 high = mid;
 else if (i_ptr->key < target)
/* too small, so look in upper half */
 low = mid + 2;
 else
/* found it, so store new key value */
 i_ptr->data = data;
 }

/* extend handle by size of one entry*/
 SetHandleSize(*index_hndl, (i_size + 1) *
 sizeof(index_entry));
/* test for memory error here */
 n_ptr = i_ptr = **index_hndl + (mid * 
 sizeof(index_entry));
 memcpy(++n_ptr, i_ptr, (i_size - mid) *
 sizeof(index_entry));
/* do we insert as right or left? */
 if (i_ptr->key < target)
 i_ptr = n_ptr;
/* and move in the new key and data value */
 i_ptr->key = target;
 i_ptr->data = data;
 }
}/* end of db_insert_key() */

 

Community Search:
MacTech Search:

Software Updates via MacUpdate

Latest Forum Discussions

See All

Whitethorn Games combines two completely...
If you have ever gone fishing then you know that it is a lesson in patience, sitting around waiting for a bite that may never come. Well, that's because you have been doing it wrong, since as Whitehorn Games now demonstrates in new release Skate... | Read more »
Call of Duty Warzone is a Waiting Simula...
It's always fun when a splashy multiplayer game comes to mobile because they are few and far between, so I was excited to see the notification about Call of Duty: Warzone Mobile (finally) launching last week and wanted to try it out. As someone who... | Read more »
Albion Online introduces some massive ne...
Sandbox Interactive has announced an upcoming update to its flagship MMORPG Albion Online, containing massive updates to its existing guild Vs guild systems. Someone clearly rewatched the Helms Deep battle in Lord of the Rings and spent the next... | Read more »
Chucklefish announces launch date of the...
Chucklefish, the indie London-based team we probably all know from developing Terraria or their stint publishing Stardew Valley, has revealed the mobile release date for roguelike deck-builder Wildfrost. Developed by Gaziter and Deadpan Games, the... | Read more »
Netmarble opens pre-registration for act...
It has been close to three years since Netmarble announced they would be adapting the smash series Solo Leveling into a video game, and at last, they have announced the opening of pre-orders for Solo Leveling: Arise. [Read more] | Read more »
PUBG Mobile celebrates sixth anniversary...
For the past six years, PUBG Mobile has been one of the most popular shooters you can play in the palm of your hand, and Krafton is celebrating this milestone and many years of ups by teaming up with hit music man JVKE to create a special song for... | Read more »
ASTRA: Knights of Veda refuse to pump th...
In perhaps the most recent example of being incredibly eager, ASTRA: Knights of Veda has dropped its second collaboration with South Korean boyband Seventeen, named so as it consists of exactly thirteen members and a video collaboration with Lee... | Read more »
Collect all your cats and caterpillars a...
If you are growing tired of trying to build a town with your phone by using it as a tiny, ineffectual shover then fear no longer, as Independent Arts Software has announced the upcoming release of Construction Simulator 4, from the critically... | Read more »
Backbone complete its lineup of 2nd Gene...
With all the ports of big AAA games that have been coming to mobile, it is becoming more convenient than ever to own a good controller, and to help with this Backbone has announced the completion of their 2nd generation product lineup with their... | Read more »
Zenless Zone Zero opens entries for its...
miHoYo, aka HoYoverse, has become such a big name in mobile gaming that it's hard to believe that arguably their flagship title, Genshin Impact, is only three and a half years old. Now, they continue the road to the next title in their world, with... | Read more »

Price Scanner via MacPrices.net

B&H has Apple’s 13-inch M2 MacBook Airs o...
B&H Photo has 13″ MacBook Airs with M2 CPUs and 256GB of storage in stock and on sale for up to $150 off Apple’s new MSRP, starting at only $849. Free 1-2 day delivery is available to most US... Read more
M2 Mac minis on sale for $100-$200 off MSRP,...
B&H Photo has Apple’s M2-powered Mac minis back in stock and on sale today for $100-$200 off MSRP. Free 1-2 day shipping is available for most US addresses: – Mac mini M2/256GB SSD: $499, save $... Read more
Mac Studios with M2 Max and M2 Ultra CPUs on...
B&H Photo has standard-configuration Mac Studios with Apple’s M2 Max & Ultra CPUs in stock today and on Easter sale for $200 off MSRP. Their prices are the lowest available for these models... Read more
Deal Alert! B&H Photo has Apple’s 14-inch...
B&H Photo has new Gray and Black 14″ M3, M3 Pro, and M3 Max MacBook Pros on sale for $200-$300 off MSRP, starting at only $1399. B&H offers free 1-2 day delivery to most US addresses: – 14″ 8... Read more
Department Of Justice Sets Sights On Apple In...
NEWS – The ball has finally dropped on the big Apple. The ball (metaphorically speaking) — an antitrust lawsuit filed in the U.S. on March 21 by the Department of Justice (DOJ) — came down following... Read more
New 13-inch M3 MacBook Air on sale for $999,...
Amazon has Apple’s new 13″ M3 MacBook Air on sale for $100 off MSRP for the first time, now just $999 shipped. Shipping is free: – 13″ MacBook Air (8GB RAM/256GB SSD/Space Gray): $999 $100 off MSRP... Read more
Amazon has Apple’s 9th-generation WiFi iPads...
Amazon has Apple’s 9th generation 10.2″ WiFi iPads on sale for $80-$100 off MSRP, starting only $249. Their prices are the lowest available for new iPads anywhere: – 10″ 64GB WiFi iPad (Space Gray or... Read more
Discounted 14-inch M3 MacBook Pros with 16GB...
Apple retailer Expercom has 14″ MacBook Pros with M3 CPUs and 16GB of standard memory discounted by up to $120 off Apple’s MSRP: – 14″ M3 MacBook Pro (16GB RAM/256GB SSD): $1691.06 $108 off MSRP – 14... Read more
Clearance 15-inch M2 MacBook Airs on sale for...
B&H Photo has Apple’s 15″ MacBook Airs with M2 CPUs (8GB RAM/256GB SSD) in stock today and on clearance sale for $999 in all four colors. Free 1-2 delivery is available to most US addresses.... Read more
Clearance 13-inch M1 MacBook Airs drop to onl...
B&H has Apple’s base 13″ M1 MacBook Air (Space Gray, Silver, & Gold) in stock and on clearance sale today for $300 off MSRP, only $699. Free 1-2 day shipping is available to most addresses in... Read more

Jobs Board

Medical Assistant - Surgical Oncology- *Apple...
Medical Assistant - Surgical Oncology- Apple Hill Location: WellSpan Medical Group, York, PA Schedule: Full Time Sign-On Bonus Eligible Remote/Hybrid Regular Apply Read more
Omnichannel Associate - *Apple* Blossom Mal...
Omnichannel Associate - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Read more
Cashier - *Apple* Blossom Mall - JCPenney (...
Cashier - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Blossom Mall Read more
Operations Associate - *Apple* Blossom Mall...
Operations Associate - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Read more
Business Analyst | *Apple* Pay - Banco Popu...
Business Analyst | Apple PayApply now " Apply now + Apply Now + Start applying with LinkedIn Start + Please wait Date:Mar 19, 2024 Location: San Juan-Cupey, PR Read more
All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.