TweetFollow Us on Twitter

Sound Wired
Volume Number:1
Issue Number:9
Column Tag:Assembly Language Lab

"Wired for Sound"

By Chris Yerga, MacTutor Contributing Editor

Can You Keep a Secret?

One of the Macintosh's best kept secrets is its wonderful sound driver. This beauty is capable of generating a variety of sounds including simple tones, multi-voice music, complex speech, and digitally recorded sounds. In spite of its power, it is relatively easy to use once the programmer takes the time to understand a few basic concepts. This month's column concerns itself with the sound driver and the techniques the programmer must employ to use it. First will come a description of the device manager, with emphasis on it's relation to the sound driver in particular. The actual sound driver description is next, followed by a sample program that ties it all together.

First Things First

First, a bit of background information on the device manager. The device manager is the part of the Macintosh ROM that allows the use and control of devices, which are usually hardware peripherals connected to the Mac. Examples of devices are the serial ports, the disk drives, the sound driver, etc (desk accessories are also considered devices, however, we will not include them in our general discussion).

There are two types of devices: character and block. Character devices can read or write only one character at a time and they must do so sequentially. That is, they cannot access any data other than the very next character. Whereas block devices read and write data in 512 character blocks and are randomly accessible. This means that they have access to any block of data, regardless of its position. Another matter of note is that many device manager routines may be executed either synchronously or asynchronously. Synchronous execution means that the calling program remains idle while the requested I/O operation is performed. Conversely, asynchronous I/O operations are performed while the calling program is running.

Now Some Specifics

The device manager is one of the portions of the Macintosh ROM that has a register based calling interface. As you may remember from previous columns, this means that the programmer invokes the desired trap macro with address register A0 pointing to a data structure in memory. It is through this data structure that parameters are passed between the calling program and the routine.

The data structure that the device manager routines use is called the ioParamBlock (from here on abbreviated as ioPB). Figure 1 shows the structure of the ioPB. The numbers in parenthesis are the byte offsets from the base address of the ioPB. There is a byte-division ruler to the right of the figure to ease the judgement of lengths.

The programmer need not concern himself with the first four fields of the ioPB, the device manager routines use them internally.

The fifth field, ioCompletion, is used for asyncronous I/O operations. When the device manager has finished an asyncronous operation, it will jump to the routine pointed to by ioCompletion, if it is nonzero. For example, you could request that the device manager send a page of data asynchronously through the serial port. While the device manager was doing this, you could set up the next page of data to be sent. When finished, the device manager would jump to your completion routine, which in turn would send the next page of data.

Upon returning from a device manager call, the ioResult field will contain a code describing what error, if any, occurred. IoNamePtr is only used when first opening a device. It points to the name of the device to be opened. All open devices are assigned reference numbers by the device manager. These reference numbers must be specified by the calling program and are stored in the ioRefNum field.

The device driver allows Control/Status calls to certain devices. These calls allow the user to send commands to devices (such as configuration commands) or to get status information from devices. A control/status call requires that the programmer send a control code to the device; this code is contained in the CSCode field of the ioPB. Certain control calls also need parameters of their own. These parameters are passed through the CSParam field.

When a read or write call is made, the address of the data buffer is passed in ioBuffer. The number of bytes that the programmer wants to read or write is contained in the ioReqCount; the number of bytes successfully read or written is returned in ioActCount. IoPosMode and ioPosOffset are used only with block devices. They allow the data to be accessed non-sequentially.

To use the sound driver from assembly language, the programmer must set up the appropriate fields of the ioPB, load A0 with a pointer to it, and then call the trap macro. Asyncronous execution is flagged by appending ",ASYNC" to the end of the trap name. For example to write a data buffer to a device, you would set up it's reference # etc. in the ioPB, store a pointer to the buffer in the ioBuffer field, load A0, and then execute _Write,ASYNC.

The sound driver is broken into three pieces: the square-wave synthesizer, the four-tone synthesizer, and the free-form synthesizer. Each synthesizer generates a different type of sound and requires a specific amount of processor time. Each type of sound is generated by making a write call to the device manager requesting that the proper data is sent to the sound driver. The square-wave and four-tone synthesizers will be described here.

Nothing Fancy

The simplest subset of the sound driver is the square-wave synthesizer. When running asynchronously, the square-wave synthesizer uses approximately 2% of the processor's time- a modest degree of overhead. However, the type of sounds that this synthesizer is capable of creating are limited to simple tones or beeps.

To get the square-wave synthesizer going, the programmer simply writes a SWSythRec to the sound driver. The first word of the SWSythRec is -1. This tells the sound driver that the data in the record should be routed to the square-wave synthesizer. Following this is a list of tones to be produced. The end of the tone list is dentoed by a zero.

Each tone is 3 words long. The first word is the count value, where frequency = 783360 / count. Complete lists of count values for the C major scale and the equal tempered scale are contained in Inside Macintosh. The second word is the amplitude, or volume, of the tone. This value ranges from 0-255 inclusive, with 255 being maximum volume. The last word is the duration of the tone, in 1/60ths of a second.

An example set of data will make the above explanation clearer. The sample will be 3 tones with frequencies of 1000, 2000, and 4000 Hertz. The amplitude of the tones will be half volume. The lengths of the tones will be .5, 1, and 1.5 seconds.

The count values are calculated by dividing 783360 by the frequency. 783360/1000 = 783; 783360/2000 = 392; and 783360/4000 = 196. The amplitude will be 127 ( half of 255 ). Given that 1 second = 60 duration units, calculating the duration values is done by: (.5 )* 60 = 30; 1 * 60 = 60; 1.5 * 60 = 90.

The data looks like this:

A Barbershop Quartet in Your Mac

The four-tone synthesizer is the most taxing in terms of processor use- approximately 50%. However, it allows up to 4 tones to be produced simultaneously, allowing multi-voice music and chords to be produced. Its record, FTSynthRec, has the most complex structure of the three synthesizers.

The first word of data in the FTSynthRec is always a 1. Following this is the duration of the sound, again in 1/60ths of a second. Next are 4 pairs of values for each of the four tones to be produced.

The first long word of each pair is the rate value, a fixed-point number which is analogous to the SWSynthRec's count value. (A discussion of fixed-point numbers can be found on page 11 of the Memory Manager Introduction in Inside Macintosh ) In this case, the frequency is derived by the formula: frequency (Hz) = 1000000 / (11502.08 / rate). The last element of the pair is a long integer phase value. The phase can range in value from 0-255, and tells the square-wave synthesizer how many bytes in the tone's waveshape definition to skip before starting the tone (If this confuses you, don't worry about it. Great sounds can be created without any regard for phase).

After the four pairs of values come four Waveshape pointers, which point to waveshape definitions in memory. Each waveshape definition consists of 255 bytes that describe the shape of one pulse, or click, sent to the speaker. Consider a tone of any frequency. It is comprised of a series of pulses, or "clicks", that create a tone when generated at a certain rate. The pulse itself is a general unit used by all tones, and therefore has no effect on the frequency of the resulting tone if it is designed correctly. Figure 3 shows the waveform description of a square pulse. Although it is the simplest possible waveform to generate, it is not as "natural" sounding as a sine pulse. In most cases, a square pulse or a sine pulse will suffice; however, by changing the wave definition, various musical instruments can be simulated.

A C major chord will suit well for a set of sample data. This chord is comprised of the notes C, E, and G. The table in Inside Macintosh gives us fixed-point rate values of 3.03654, 3.79568, and 4.55481 for these notes. The equivalent hex values for these numbers are $030959, $03CBB0, and $048E06 respectively. A duration value of 60 will generate the sound for 1 second. Using the default phase value of 0, the only remaining task is the initialization of the waveshape definitions and pointers.

The sample waveshape definition is created by filling a 255 byte block of memory with data - the first half (bytes 0-127) with the value 255 and the last half (bytes 128-255) with the value 0. When this is done, the address of the block of memory is stored in the waveshape pointers of our three tones.

Here is a sample FTSynthRec with the data for a C major chord:

There are two other differences that make the four-tone synthesizer different from the square-wave synthesizer. After the FTSynthRec is set up in memory, it is not directly written to the sound driver. Rather, a six byte block is written. The first two bytes comprise an integer word of value 1. The last four bytes of this block contain a pointer to the actual FTSynthRec in memory. The second difference is that, by nature of this calling scheme, only one FTSynthRec can be written at a time. Therefore, it is necessary to loop if there is more than one sound to generate.

The program gives examples of using both the square-wave synthesizer and the four-tone synthesizer. One useful item is the macro named Center, which when given a string, the center X coordinate of the grafport, and the Y coordinate at which the text should appear, will draw the text centered at the given Y coordinate. This saves a great deal of "hit-and-miss" experimentation if, like me, you don't sit down and calculate the correct centers by hand.

With this information and a bit of patience, the average reader should be able to implement sound in his next assembly application to give it that special touch of style.


;                            
;   Sound Example #1   
;                            
;
; © 1985 By Chris Yerga for MacTutor 

INCLUDE MacTraps.D
 
;  Declare external labels 

XDEF    START 

; Define Macros

;  Note that this clever macro will center a
; string for you about the MidPT, on line Y
; for use with the _DrawString trap call.

MACRO   Center String,MidPT,Y = 

 CLR.W  -(SP)    ;Save room for INTEGER
 ;width of string
 PEA  '{String}' 
 _StringWidth  
 CLR.L  D3;Clear the high word of  ;D3 so the DIVU works 
 MOVE.W (SP)+,D3 ;Get the width (in pixels) in D3 
 DIVU #2,D3 ;Divide by 2
 MOVE.L #{MidPT},D4
 SUB.W  D3,D4  ;Subtract (Width/2) ;from center point 
 MOVE.W D4,-(SP) ;Push the X cordinat
 MOVE.W #{Y},-(SP);Push the Y cordinat
 _MoveTo;Position the pen 
 PEA  '{String}' 
 _DrawString 
|;End of Macro symbol 
;*** Local Constants ***

AllEvents EQU  $0000FFFF
MaxEvents EQU  12 
DWindLenEQU $AA  ; see DS storage area
 
; Start of Main Program 
 
BadPtr: _Debugger ;Should never get  ;here.  Is called when there is 
 ;a problem with the memory ;manager. 

START:  MOVEM.L  D0-D7/A0-A6,-(SP) LEA SAVEREGS,A0       MOVE.L
 A6,(A0)  MOVE.L A7,4(A0) 

;Initialize the ROM routines 

PEA-4(A5) ;QD Global ptr 
_InitGraf ;Init QD global 
_InitFonts;Init font manager 
_InitWindows;Init Window Mgr 
_InitMenus;Guess what...yes!
 
 CLR.L  -(SP)  
_InitDialogs
_TEInit ;Init ROM Text edit 

MOVE.L  #AllEvents,D0
_FlushEvents
_InitCursor ;Get the standard arrow     
;Allocate the memory that we need
 
MOVE.L  #50,D0 ;Get a 50 Byte ;nonrelocatable block 
_NewPtr 
 
CMP#0,D0;Did we get the block??
 BNE  BadPtr;Nope...jump to MacsBug 
LEAParamBlock,A1  ;Save the Ptr 
MOVE.L  A0,(A1)
MOVE.L  #255,D0
 
;Get a 255 byte block for waveform def 
_NewPtr,CLEAR    ;and fill it with
 ;zeros while you're at it 
CMP#0,D0;Did we get the mem? 
BNEBadPtr ;Nope...Debugger time 
LEAWave,A1;Save the Ptr 
MOVE.L  A0,(A1)     
; Set up the ioParamBlock fields     
MOVE.L  ParamBlock,A0
 ;Get the Ptr to ioParamBlock 
CLR.L 12(A0);No completion routine 
MOVE.W  #-4,24(A0) ;The Sound Driver reference # CLR.W   44(A0)
 ;Standard positioning 
CLR.L 46(A0);No offset for the write  
;Fill the Wave buffer with a simple ;Square Wave definition
  
MOVE.L  Wave,A0  ;Get the base     ;address of the block 
MOVE.L  #127,D0  ;Set up the wave definition

MakeWave:

 MOVE.B #255,(A0)+ ;Set bytes 0-127 of the wave def            
 ;and increment A0 
DBRA  D0,MakeWave  ;loop until 127...         
;Set up the Dialog Box 

CLR.L -(SP) ;Save room for DIalogPtr 
MOVE.W  #128,-(SP) ;The ResID of the dialog 
PEADStorage(A5)  ;Where to put the DialogRec 
MOVE.L  #-1,-(SP);Put it in front, 
_GetNewDialog  
LEADHandle,A2    ;Save handle, but keep it
MOVE.L  (SP),(A2);on the stack 
_DrawDialog ;Draw the dialog.. 
LEADHandle,A2  
MOVE.L  (A2),-(SP) ;Set the Dialog to  ;the current GrafPort 
_SetPort    
MOVE.W  #7,-(SP) ;Select Athens 
_TextFont 
MOVE.W  #18,-(SP);in 18Pt size 
_TextSize   

Center  Sound Example #1,206,35      
MOVE.W  #1,-(SP) ;Select Chicago 
_TextFont 
MOVE.W  #12,-(SP);in 12Pt size 
_TextSize   

Center  ©1985 Chris Yerga for MacTutor,206,52 

; Main Event Loop 

MAIN:   

CLR.L -(SP) ;NIL for FilterProc 
PEAItemHit;VAR ItemHit 
_ModalDialog;handle the dialog for us! 
MOVE  ItemHit,D0 ;Get the result 

CMP#1,D0;Is it Square Wave? 
BEQSquare ;Yes....   
CMP#2,D0;Is it 4Tone? 
BEQFourTone ;You got it....   
CMP#3,D0;Is it Bye Bye?? 
BEQ   Adios ;Uh huh...    
BRAMain ;Keep going till we get    ;a valid event...      
Square: 
 
MOVE.L  ParamBlock,A0 ;Get the Ptr to ioParamBlock 
MOVE.L  #SqEnd-SqBegin,36(A0) ;The length of the data, so we   
 ;can tell the device manager
 ;how much to write  
LEASqBegin,A1    ;Ptr to our data buffer 
MOVE.L  A1,32(A0) 
_Write  ;this is the actual Write call.                        
 ;Be sure to have A0 pointing to   ;your ioParamBlock!   
BRAMain ;We're done for now..  

SqBegin: 

DC.W  -1;This tells the sound ;driver that the data is         
 ;for the square-wave     ;driver. 

 ;Play the C major diatonic scale... 
 
DC.W  5937,128,20  ;C
DC.W  5278,128,20  ;D 
DC.W  4750,128,20  ;E
DC.W  4453,128,20  ;F 
DC.W  3958,128,20  ;G
DC.W  3562,128,20  ;A
DC.W  3167,128,20  ;B
DC.W  2969,128,20  ;C
DC.W  3167,128,20  ;B
DC.W  3562,128,20  ;A 
DC.W  3958,128,20  ;G 
DC.W  4453,128,20  ;F 
DC.W  4750,128,20  ;E 
DC.W  5278,128,20  ;D 
DC.W  5937,128,20  ;C 
DC.W  0,0,0 
SqEnd:  DC.W0  ;End of the data  

FourTone:
 
MOVE.L  ParamBlock,A0 ;Get the Ptr to  ;our ioParamBlock 
MOVE.L  #6,36(A0)  ;ioCount (how many   ;bytes to write)       
  ;in this case always     ;6 bytes  
MOVE.L  Wave,A2  ;Get the Ptr to the 
 ;waveshape def 
LEAFTSynthRec,A1 ;Get the Ptr to the sound table 
MOVE.L  #3,D0    ;Loop 4 times 

SetWave: 
 
MOVE.W  #30,(A1) ;Set the tone length  ;to .5 seconds 
ADDA  #34,A1;Adjust A1 to point    ;to WavePtr fields 
MOVE.L  A2,(A1)+ ;Set 1st WavePtr 
MOVE.L  A2,(A1)+ ;Set 2nd WavePtr 
MOVE.L  A2,(A1)+ ;Set 3rd WavePtr 
MOVE.L  A2,(A1)+ ;Set 4th WavePtr 
DBRA  D0,SetWave   
LEAFTBegin,A3    ;Set the BuffPtr in ;the ParamBlock 
MOVE.L  A3,32(A0);to point to our data ;buffer 
LEAFTSynthRec,A2 ;Set the FTSRecPtr  ;in the Data
MOVE.L  #3,D3    ;Loop 4 times 

FTLoop: MOVE.L A2,2(A3) ;Set the
 ;pointer to point 
 ;to the next sound  
MOVE.L  ParamBlock,A0 ;Get Ptr to  ;ioParamBlock in A0 
_Write  ;Write it! 
ADDA  #50,A2;Point to the next     ;tone record 
DBRA  D3,FTLoop    ;and loop...    
BRAMain ;Thank you...    

;The four-tone record is unique in that it is not actually written ;to 
the sound driver.  Rather,  only a ptr to the actual tones is ;written. 
This means that only one set of 4 tones can be written ;at a time. 

FTBegin:  

DC.W 1  ;Four tone = 1 
DC.L   0  ;Holder for Ptr to the actual
        ;tones   

 FTSynthRec:   

DC.W  60;Do sound for 1 sec 
DC.L  $3CBB0,0    
DC.L  $5B188,0
DC.L  $4DBC3,0
DC.L  $00000,0 
DC.L  0,0,0,0    ;Place holders for  ;WavePtr's          
DC.W  60;Do sound for 1 sec 
DC.L  $36A85,0
DC.L  $50F95,0   
DC.L  $6D50A,0   
DC.L  $00000,0   
DC.L  0,0,0,0    ;Place holders for  ;WavePtr's          
DC.W  75;.5 SEC 
DC.L  $287CA,0   
DC.L  $3CBB0,0   
DC.L  $30959,0 
DC.L  $00000,0   
DC.L  0,0,0,0    

DC.W  30  
DC.L  $1E5D8,0   
DC.L  $287CA,0 
DC.L  $30959,0   
DC.L  $00000,0   
DC.L  0,0,0,0     

ADIOS:  LEA SaveRegs,A0   MOVE.L (A0),A6     
 MOVE.L 4(A0),A7 
 MOVEM.L(SP)+,D0-D7/A0-A6 RTS 

; Program Variables 
 
SaveRegs: DCB.L  2,0 ;For saving the SP etc.. 

DHandle:DC.L0    ;For the dialog Handle 
ItemHit:DC.W0    ;For _ModalDialog ParamBlock:     
 DC.L 0 ;For the ioPB 
Wave: DC.L0 ;For the WaveShape definition 

; Dialog Record 
 
DStorage: DS.W   DWindLen 
;  END OF SOURCE CODE


;     Resource File    
; for Sound Exercize #1
 
RESOURCE 'BDOG' 0 'IDENTIFICATION' 

STRING_FORMAT  2 
DC.B  'FREEWAVE VER -0.1 OF 3/19/85' STRING_FORMAT  0 

.ALIGN 2 
RESOURCE 'BNDL' 128 'BUNDLE' 

DC.L  'BDOG';Name of Signature
DC.W  0,1 ;Data 

DC.L  'FREF';FREF Mappings 
DC.W  0 ;1 Mapping ( 1-1 = 0 ) 
DC.W  0,128  
DC.L  'ICN#';ICN# Mappings 
DC.W  0 ;2 Mappings ( 1-1 = 0 ) 
DC.W  0,128
 
.ALIGN 2 
RESOURCE 'FREF' 128 'FREF#1' 
 
DC.B  'APPL',0,0,0  
.ALIGN 2 
RESOURCE 'ICN#' 128 'Application Icon' 

INCLUDE WaveIcon.ASM 

.ALIGN 2 
RESOURCE 'ICON' 128 'DlogIcon' 

INCLUDE SoundIcon.ASM 

;      Dialog Box    

.ALIGN 2 
RESOURCE 'DLOG' 128 'AboutBox' STRING_FORMAT  2
DC.W  95,50,270,462;BoundsRect
DC.W  1 ;ProcID
DC.B  1,1 ;TRUE for visible
DC.B  0,0 ;FALSE for GoAway 
DC.L  0 ;Refcon (Chuckle!)
DC.W  129 ;DITL ResID
DC.B  'HI';Title (unused) 

;    Dialog Box Items    
.ALIGN 2 
RESOURCE 'DITL' 129 'AboutBox items' 

DC.W  3 ;4 Items in the list 
 ;(4 - 1) = 3
;  Item #1   
DC.L  0 ;Handle holder
DC.W  114,41,136,201 ;BoundsRect 
DC.B  4 ;Button 
DC.B  'Square Wave ' ;Text Preceded by length byte 
;  Item #2     
DC.L  0 ;Handle holder
DC.W  114,210,136,361;BoundsRect DC.B4 ;Button
DC.B  'Four Tone '   ;Text Preceded by length byte 
;  Item #3   
DC.L  0 ;Handle holder
DC.W  144,41,166,361 ;BoundsRect 
DC.B  4 ;Button
DC.B  'Ive had enough fun for now' ;Text Preceded by length byte 
;  Item #4     
DC.L  0 ;Handle Holder
DC.W  60,194,92,226  ;BoundsRect
DC.B  128+32;Disabled Icon
DC.B  2 
DC.W  128 ;ICON ResID STRING_FORMAT  0 
 ;EOF 

Linker file

 !START

 /Output Sound

 ]
 
 SoundOff

 /Resources
 SOResource

 /TYPE 'APPL' 'BDOG'

 $
 

Community Search:
MacTech Search:

Software Updates via MacUpdate

Capto 1.2.9 - $29.99
Capto (was Voila) is an easy-to-use app that takes capturing, recording, video and image editing to the next level. With an intelligent file manager and quick sharing options, Capto is perfect for... Read more
Opera 51.0.2830.40 - High-performance We...
Opera is a fast and secure browser trusted by millions of users. With the intuitive interface, Speed Dial and visual bookmarks for organizing favorite sites, news feature with fresh, relevant content... Read more
GarageSale 7.0.13 - Create outstanding e...
GarageSale is a slick, full-featured client application for the eBay online auction system. Create and manage your auctions with ease. With GarageSale, you can create, edit, track, and manage... Read more
1Password 6.8.7 - Powerful password mana...
1Password is a password manager that uniquely brings you both security and convenience. It is the only program that provides anti-phishing protection and goes beyond password management by adding Web... Read more
Evernote 7.0.1 - Create searchable notes...
Evernote allows you to easily capture information in any environment using whatever device or platform you find most convenient, and makes this information accessible and searchable at anytime, from... Read more
MacUpdate Desktop 6.2.0 - $20.00
MacUpdate Desktop brings seamless 1-click app installs and version updates to your Mac. With a free MacUpdate account and MacUpdate Desktop 6, Mac users can now install almost any Mac app on... Read more
HoudahSpot 4.3.5 - Advanced file-search...
HoudahSpot is a versatile desktop search tool. Use HoudahSpot to locate hard-to-find files and keep frequently used files within reach. HoudahSpot will immediately feel familiar. It works just the... Read more
EtreCheck 4.0.4 - For troubleshooting yo...
EtreCheck is an app that displays the important details of your system configuration and allow you to copy that information to the Clipboard. It is meant to be used with Apple Support Communities to... Read more
WhatsApp 0.2.8361 - Desktop client for W...
WhatsApp is the desktop client for WhatsApp Messenger, a cross-platform mobile messaging app which allows you to exchange messages without having to pay for SMS. WhatsApp Messenger is available for... Read more
iClock 4.2 - Customize your menubar cloc...
iClock is a menu-bar replacement for Apple's default clock but with 100x features. Have your Apple or Google calendar in the menubar. Have the day, date, and time in different fonts and colors in the... Read more

Latest Forum Discussions

See All

The best games like Florence
Florence is a great little game about relationships that we absolutely adored. The only problem with it is it's over a little too soon. If you want some other games with some emotional range like Florence, check out these suggestions: [Read more] | Read more »
Angry Birds Champions adds cash prizes t...
Collaborating with developer Rovio Entertainment, GSN Games has released a twist on the Angry Birds formula. Angry Birds Champions features the same bird-flinging gameplay, but now you can catapult Red and co for cash. | Read more »
Around the Empire: What have you missed...
148Apps is part of a family. A big family of sites that make sure you're always up to date with all the portable gaming news. Just like a real family, I guess. I don't know, my mum never told me anything about Candy Crush to be fair. [Read more] | Read more »
The Battle of Polytopia Guide - Tips for...
The addition of multiplayer to The Battle of Polytopia has catapulted the game from a fun enough time waster to a fully-fledged 4X experience on your phone. We've been playing quite a few matches over the past week or so, and we've put together a... | Read more »
All the best games on sale for iPhone an...
Hi there, and welcome to our round up of all the best games that are on sale for iOS at the moment. It's not a vintage week in terms of numbers, but I'm pretty sure that every single one of these is worth picking up if you haven't already played... | Read more »
Disc Drivin' 2 Guide - Tips for the...
We're all still playing quite a bit of Disc Drivin' 2 over here at 148Apps, and we've gotten pretty good at it. Now that we've spent some more time with the game and unlocked more powerups, check out some of these more advanced tips: | Read more »
Alto's Odyssey Guide - How to Tackl...
Alto’s Odyssey is a completely stunning and serene runner, but it can also be a bit tricky. Check out these to try and keep your cool while playing this endless runner: Don’t focus too much on tasks [Read more] | Read more »
Here's everything you need to know...
Alto's Odyssey is a really, really good game. If you don't believe me, you should definitely check out our review by clicking this link right here. It takes the ideas from the original Alto's Adventure, then subtly builds on them, creating... | Read more »
Alto's Odyssey (Games)
Alto's Odyssey 1.0.1 Device: iOS Universal Category: Games Price: $4.99, Version: 1.0.1 (iTunes) Description: Just beyond the horizon sits a majestic desert, vast and unexplored. Join Alto and his friends and set off on an endless... | Read more »
Vainglory 5v5: Everything you need to kn...
Vainglory just got bigger. [Read more] | Read more »

Price Scanner via MacPrices.net

Apple AirPods in stock today for $159, free s...
Adorama reports stock of Apple AirPods today for $159 including free shipping, plus pay no sales tax outside of NY & NJ. See our Apple AirPod Price Tracker for the latest prices and stock status... Read more
Saturday Sale: Amazon offers 12″ 1.3GHz MacBo...
Amazon has Silver and Gold 2017 12″ 1.3GHz Retina MacBooks on sale for $250 off MSRP. Shipping is free: – 12″ 1.3GHz Silver MacBook: $1349.99 $250 off MSRP – 12″ 1.3GHz Gold MacBook: $1349.99 $250... Read more
Use your Apple Education discount and save up...
Purchase a new Mac using Apple’s Education discount, and take up to $400 off MSRP. All teachers, students, and staff of any educational institution with a .edu email address qualify for the discount... Read more
Apple Canada offers 2017 21″ and 27″ iMacs fo...
 Canadian shoppers can save up to $470 on the purchase of a 2017 current-generation 21″ or 27″ iMac with Certified Refurbished models at Apple Canada. Apple’s refurbished prices are the lowest... Read more
9″ iPads available online at Walmart for $50...
Walmart has 9.7″ Apple iPads on sale for $50 off MSRP for a limited time. Sale prices are for online orders only, in-store prices may vary: – 9″ 32GB iPad: $279.99 $50 off – 9″ 128GB iPad: $379.99 $... Read more
15″ Apple MacBook Pros, Certified Refurbished...
Save $360-$420 on the purchase of a 2017 15″ MacBook Pro with Certified Refurbished models at Apple. Apple’s refurbished prices are the lowest available for each model from any reseller. An standard... Read more
Amazon restocks MacBook Pros with models avai...
Amazon has restocked 15″ and 13″ Apple MacBook Pros with models on sale for up to $251 off MSRP. Shipping is free. Note that stock of some Macs may come and go (and some sell out quickly), so check... Read more
Lowest price of the year: 15″ 2.8GHz Apple Ma...
Amazon has the 2017 Space Gray 15″ 2.8GHz MacBook Pro on sale today for $251 off MSRP. Shipping is free: – 15″ 2.8GHz Touch Bar MacBook Pro Space Gray (MPTR2LL/A): $2148, $251 off MSRP Their price is... Read more
Apple restocks full line of Certified Refurbi...
Apple has restocked a full line of Apple Certified Refurbished 2017 13″ MacBook Pros for $200-$300 off MSRP. A standard Apple one-year warranty is included with each MacBook, and shipping is free.... Read more
Lowest sale price available for 13″ 1.8GHz Ma...
Focus Camera has the 2017 13″ 1.8GHz/128GB Apple MacBook Air on sale today for $829 including free shipping. Their price is $170 off MSRP, and it’s the lowest price available for a current 13″... Read more

Jobs Board

*Apple* Media Products Commerce Engineering...
# Apple Media Products Commerce Engineering Manager Job Number: 56207285 Santa Clara Valley, California, United States Posted: 26-Jan-2018 Weekly Hours: 40.00 **Job Read more
Digital Platforms Lead, Today at *Apple* -...
# Digital Platforms Lead, Today at Apple Job Number: 56178747 Santa Clara Valley, California, United States Posted: 23-Feb-2018 Weekly Hours: 40.00 **Job Summary** Read more
*Apple* Retail - Multiple Positions - Apple,...
Job Description:SalesSpecialist - Retail Customer Service and SalesTransform Apple Store visitors into loyal Apple customers. When customers enter the store, Read more
*Apple* Retail - Multiple Positions - Apple,...
Job Description: Sales Specialist - Retail Customer Service and Sales Transform Apple Store visitors into loyal Apple customers. When customers enter the store, Read more
*Apple* Retail - Multiple Positions - Apple,...
Job Description:SalesSpecialist - Retail Customer Service and SalesTransform Apple Store visitors into loyal Apple customers. When customers enter the store, Read more
All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.