TweetFollow Us on Twitter

File Package
Volume Number:1
Issue Number:7
Column Tag:MacPascal

Standard File Package, unpack & copy the bits

By Alan Wootton

Here is a program to view MacPaint documents from MacPascal (like “showpage”). I use the File Manager, the Standard File Package, the toolbox procedure UnPackBits, and QuickDraw’s CopyBits to display the image loaded in memory.

In MacTutor #5, Gary Palmer asked about loading MacPaint files in MacPascal. Well, I remembered once running across a description of MacPaint docs by Bill Atkinson. After some digging, I found the description in part of a mailing from tech support to developers dated Dec. 1983.

Atkinson explains that the resource fork is not used and that a 512 byte header precedes the packed bitmap data. The header is an array of patterns and some empty space. To simply view the picture we can ignore the header. The MacPaint ‘page’ is 720 lines of 72 bytes each. This is almost 51K and since we wish to load this into memory, a FatMac will probably be required. Atkinson gives a short routine to decode the data into a page. He uses UnpackBits, which is on page 7 of ToolBox Utilities.

Reading the data was a problem. I tried to use the file I/O routines provided with MacPascal. One must either read data byte-at-a-time, which takes forever, or, if you read large blocks, you can never get the last partially filled block. At this point I decided that Real Programmers use the low level File Manager routines. In other words PBOpen, PBRead, and then PBClose.

Another MacPascal shortcoming is the GetOldFile function. Once again, Real Programmers go straight past the limitations of the language and consult the bible (Inside Mac). We shall use the Standard File Package.

The Standard File Package

MacPascal’s function GetOldName will only select files of type TEXT. To select MacPaint docs it will be necessary to call the Standard File Package directly (OldPaintName in following program). On page 30 of Packages in “Inside Macintosh”, the procedure SFGetFile is described. To call it, use trap $A9EA, which is Pack3, and be sure to push a 2, the ‘selector’, on the stack last. You must type in the SFReply record on page 25. [For a complete description of SFReply, see the Assembly Column in this issue.] Since our type list will just be one type (PNTG) it will not be necessary to declare an array. Pass nil for filefilter and dlghook. There is an argument to pass a prompt string that Inside Mac says is historical only. I find that it works fine.

Low Level File Manager

The filecall interface in the following program simulates the PB calls of the File Manager. This is an example of the OS call I presented in MacTutor #6. [Please refer to issue #6 for details on calling OS routines from Pascal.] Before you can use the the PB routines, you must type the lengthy Parameter Block declarations. There are four variant parts to this record. I have only used the ioParam part here because that is all that was needed in this example. You should type the whole thing and save it somewhere for later use. Note that 8 bit types do not come out right, so one must take care that the declaration has the correct length. The routine descriptions (starting on page 31 of the File Manager) give a nice list of those parameters that must be set before calling (assembly programmers note: in some places ioRefNum is listed as 22, but the correct number is 24). You should carefully check that each parameter is set correctly before calling. The exception is ioCompletion, which can be ignored since we will be making synchronous calls. If ioNamePtr is not nil then the File Manager assumes that its value is the address of a string. This could badly mess up memory. In MacPascal, declared variables are cleared to 0’s so you can get away with this, but later, when you compile, nasty bugs pop up (this actually happened to me).

UnPackBits

UnPackBits is actually very simple. I have complicated things by not reading all the data into memory at once. The scheme used is to read 1024 bytes into memory (skipping the header) and when the first 512 bytes are used I slide the upper 512 bytes down and add 512 bytes onto the end. The program unpacks 72 bytes at a time for 720 lines. For faster operation you can unpack 4 lines at a time. Change 720 to 180 and 72 to 288.

After the page array is filled, it would be nice to take a look at it. Copybits is used to move the image onto the drawing window. The nice thing about copybits is that it will scale the image to fit. Simply setup a Quickdraw Bitmap record for page, set destrect to the desired size, and call copybits as shown. If you change 144 to 576 and 180 to 720 you can see the painting full size.

To write a MacPaint document (not done in this program) it is necessary to know the format of the header. The header is a 4 byte version number (default = 2) and then 38*8 = 304 bytes of patterns and then 204 unused bytes for a total of 512. However, Atkinson’s example writes 512 zeros for a header so I guess that would work. To pack the data you use the reverse of the unpack procedure. Things can be made simpler though because you can use one destination buffer and then write it out after every PackBits.

It is my contention that everything in Inside Mac can be demonstrated and used from MacPascal (except things like Vertical Retrace routines). If there is anything that you have trouble with and would like to see in MacTutor, write a letter to MacTutor and I will see if there isn’t a way to do it.


program Read_MacPaint_doc;{by Alan Wootton 4/85}
           { This program reads a MacPaint file and shows            
        the picture 1/4 size in Drawing }
 uses
  Quickdraw2;
 type
  ptr = ^integer;
  OStype = longint;

  SFReply = record { this is used by the standard file               
                           package, see Packages }
    good : integer;
    ftype : OSType;
    vrefNum : integer;
    version : integer;
    fname : string[63];
   end;

{ Parameter Block information contained in File Manager 
chapter of Inside Macintosh.  Note that MacPascal won’t do 8 bit fields 
right }

  ParamBlkPtr = ^ParamBlockRec;
  ParamBlockRec = record
{ data structure of File Manager }
    qLink : Ptr;
    qType : integer;
    ioTrap : integer;
    ioCmdAddr : ptr;
    ioCompletion : ptr;
    ioResult : integer;
    ioNamePtr : ^str255;
    ioVrefNum : integer;
{  case ParamBlkType of  ...  ioParam:  }
    ioRefNum : integer;
{       ioVersNum : byte;  }
    ioPermssn : integer;{ byte }
    ioMisc : ptr;
    ioBuffer : ptr;
    ioReqCount : longint;
    ioActCount : longint;
    ioPosMode : integer;
    ioPosOffset : longint;
   end;

  diskBlock = packed array[0..511] of char;

  paintPage = array[0..35, 0..719] of integer;
{  576*720 bitmap  = 72 bytes * 720 lines =  51,840           bytes }




 var
  reply : SFReply;{ used by OldPaintName, declared here              
                   to access vRefNum }
  filename : str255;
  fileblock : ParamBlockRec;
  buff : array[0..1] of diskblock;{ 1K }

  Page : paintPage;{ Huge variable, almost 52K  }

  srcPnt : ^diskBlock;
  destPnt : ^paintPage;

  lines, err : integer;

  curport : Grafptr;
  pageBits : bitmap;
  destRect : Rect;


{ common OS trap code, could be done with ‘Generic’ call}
{see MacTutor Vol. 1 No. 6 for assembly source code}
 function filecall (Pb : ParamBlkPtr;
         trap : integer) : integer;
  var
   access : array[0..12] of integer;
   d0, a0 : longint;
 begin
  stuffHex(@access, ‘2848548C41FA000C309F245F265F20522013FFFF224826804ED4’);
  a0 := ord(pb);
  inlineP($4E75, @d0, @a0, trap, @access);
  filecall := loword(d0);
 end;

{ The following File Manager calls work just like   }
{ those described in Inside Macintosh for the Lisa Pascal Workshop.  
}
{ Except that the async parameter is a dummy; all calls are sync }

 function PBOpen (Pb : ParamBlkPtr;
         async : boolean) : integer;
 begin
  PBOpen := filecall(pb, $A000);
 end;

 function PBClose (Pb : ParamBlkPtr;
         async : boolean) : integer;
 begin
  PBClose := filecall(pb, $A001);
 end;

 function PBRead (Pb : ParamBlkPtr;
         async : boolean) : integer;
 begin
  PBRead := filecall(pb, $A002);
 end;


{  same as OldFileName, only for MacPaint docs }
 function OldPaintName (prompt : str255) : str255;
  var
   where : point;
   typelist : longint;
 begin
  reply.good := 0;
  typelist := $504E5447;{ ‘PNTG’ }
  setPT(where, 100, 100);
  inlineP($A9EA, where, @prompt, nil, 1, @typelist, nil, @reply, 2);
{ $A9EA is pack3 ,  2 is SFGetFile, see Packages  }
  if reply.good <> 0 then
   OldPaintName := reply.Fname
  else
   OldPaintName := ‘’;
 end;


{  This procedure moves buff[1] down onto buff[0], adjusts srcPnt to 
point at it’s same data and tacks more data on end in buff[1].     }
 procedure Refill_Buffer;
 begin
  blockmove(@buff[1], @buff[0], 512);
  srcPnt := pointer(ord(srcPnt) - 512);
  fileBlock.ioBuffer := @buff[1];
  fileBlock.ioReqCount := 512;
  fileBlock.ioPosMode := 0;
  err := PBRead(@fileBlock, false);{ fill buff[1] }
 end;


begin { main }
 ShowDrawing;
 fileName := OldPaintName(‘ Select Painting to examine’);
 while filename <> ‘’ do
  begin
   fileBlock.ioVrefNum := reply.vrefnum;
   fileBlock.ioNamePtr := @fileName;
   fileBlock.ioPermssn := 1;{ read only, version number              
                                   is in upper byte and is 0 }
   fileBlock.ioMisc := nil;
   if PBOpen(@fileBlock, false) = 0 then
    begin
     refill_buffer;{  first block is skipped }
     refill_buffer;{   fill 1 }
     refill_buffer;{ 1 onto 0, refill 1 }

     srcPnt := @buff[0];{ <-- pointer to start of data }
     destPnt := @Page;{ <----  pointer to Page bitmap }

{------> This is the part that actually decodes the packed MacPaint data 
<------}
{ $A8D0 is UnPackBits, see page 7 in Toolbox Utilities   }
{ srcPnt and destPnt are updated by UnPackBits so use @}
     for lines := 1 to 720 do{ 720 lines in paint doc }
      begin
       inlineP($A8D0, @srcPnt, @destPnt, 72);
                                     { UnPackBits for 72 bytes }
       if ord(srcpnt) >= ord(@buff[1]) then
        Refill_Buffer; { if src no longer in buff[0] }
      end;{ of 720 lines }

     if PBClose(@fileBlock, false) <> 0 then
      writeln(‘close error’);

{  now show drawing  in current port  (drawing window) }
     GetPort(curPort);

 
{  set up bitmap record }
    pagebits.baseaddr := pointer(ord(@page));
    pagebits.rowbytes := 72;
    setRect(pagebits.bounds, 0, 0, 576, 720);

     setRect(destRect, 0, 0, 144, 180);
{ 144,180 =1/4 normal, image will be squashed to fit }

     copyBits(pagebits, curport^.portbits, pagebits.bounds,          
           destRect, srcCopy, nil);
     moveto(4, 190);
     drawstring(‘Click to open another MacPainting’);
     repeat
     until button;

    end;{ if no Open error }
   fileName := OldPaintName(‘ Select another Painting ?’);
  end;{ if name<>’’ loop }
end.
 

Community Search:
MacTech Search:

Software Updates via MacUpdate

Hopper Disassembler 4.3.10- - Binary dis...
Hopper Disassembler is a binary disassembler, decompiler, and debugger for 32- and 64-bit executables. It will let you disassemble any binary you want, and provide you all the information about its... Read more
Hopper Disassembler 4.3.10- - Binary dis...
Hopper Disassembler is a binary disassembler, decompiler, and debugger for 32- and 64-bit executables. It will let you disassemble any binary you want, and provide you all the information about its... Read more
Paparazzi! 1.0b7 - Make user-defined siz...
Paparazzi! is a small utility for OS X that makes screenshots of webpages. This very simple tool takes screenshots of websites which do not fit on one screen. You specify the desired width, minimal... Read more
Amadeus Pro 2.4.4 - Multitrack sound rec...
Amadeus Pro lets you use your Mac for any audio-related task, such as live audio recording, digitizing tapes and records, converting between a variety of sound formats, etc. Thanks to its outstanding... Read more
Google Chrome 63.0.3239.108 - Modern and...
Google Chrome is a Web browser by Google, created to be a modern platform for Web pages and applications. It utilizes very fast loading of Web pages and has a V8 engine, which is a custom built... Read more
Apple Configurator 2.6 - Configure and d...
Apple Configurator makes it easy to deploy iPad, iPhone, iPod touch, and Apple TV devices in your school or business. Use Apple Configurator to quickly configure large numbers of devices connected to... Read more
WhatRoute 2.0.26 - Geographically trace...
WhatRoute is designed to find the names of all the routers an IP packet passes through on its way from your Mac to a destination host. It also measures the round-trip time from your Mac to the router... Read more
Remotix 5.0.4 - Access all your computer...
Remotix is a fast and powerful application to easily access multiple Macs (and PCs) from your own Mac. Features Complete Apple Screen Sharing support - including Mac OS X login, clipboard... Read more
WhatRoute 2.0.26 - Geographically trace...
WhatRoute is designed to find the names of all the routers an IP packet passes through on its way from your Mac to a destination host. It also measures the round-trip time from your Mac to the router... Read more
Google Chrome 63.0.3239.108 - Modern and...
Google Chrome is a Web browser by Google, created to be a modern platform for Web pages and applications. It utilizes very fast loading of Web pages and has a V8 engine, which is a custom built... Read more

Latest Forum Discussions

See All

WWE Mayhem guide - beginner tips and tri...
WWE Mayhem brings all of the familiar faces from your favorite wrestling league to mobile in this exciting new fighting game. Build up a team of your favorite WWE superstars and fight your way to the championship title, or battle against your... | Read more »
The best new games we played this week -...
We've made it through another week, so let's treat ourselves to some of the best new games to launch in the past few days. It was another exciting week with some long-awaited indie games making their debut, and some big console titles making the... | Read more »
Match blocks to pull off dance moves in...
Ferdinand: Unstoppabull is a brand new match three puzzler based on the animated movie of (almost) the same name. As you can expect, you have to match blocks together to complete a bunch of puzzling levels and earn a high score. [Read more] | Read more »
Lineage 2: Revolution’s end of year upda...
Now available in 54 countries worldwide, Lineage 2: Revolution is continuing its global quest to be the most popular mobile MMORPG by launching a jam-packed end of year update. Complete with many subtle tweaks to help improve users’ online... | Read more »
The 5 best Star Wars games on iOS
The time has almost come.Star Wars: The Last Jedifinally hits theaters in the cinematic event that might be bigger than Christmas. To celebrate, we're taking a look at the best--and only the best--Star Warsmobile games to date. [Read more] | Read more »
Life Is Strange (Games)
Life Is Strange 1.1 Device: iOS Universal Category: Games Price: $2.99, Version: 1.1 (iTunes) Description: Life Is Strange is a five part episodic game that sets out to revolutionize story-based choice and consequence games by... | Read more »
Oddworld: New 'n' Tasty (Game...
Oddworld: New 'n' Tasty 1.0 Device: iOS Universal Category: Games Price: $7.99, Version: 1.0 (iTunes) Description: ** PLEASE NOTE: Requires 3.6GB free space to install. Runs at variable resolutions based on device capabilities.... | Read more »
Gorogoa (Games)
Gorogoa 1.0 Device: iOS Universal Category: Games Price: $4.99, Version: 1.0 (iTunes) Description: Gorogoa is an elegant evolution of the puzzle genre, told through a beautifully hand-drawn story designed and illustrated by Jason... | Read more »
Why Guns of Boom will be big for mobile...
Earlier this week, Game Insight, the minds that brought you Guns of Boom, revealed plans for an esports mode in the popular FPS title, with big implications for the game's future. Guns of Boom has been quite popular for some time now, so it's... | Read more »
The best mobile games to play on lazy ho...
With the holidays in full swing, there's hopefully going to be a lot of time off work lazing around the house. With all of that free time, it's a perfect opportunity to catch up on some mobile games that you might have missed out on earlier this... | Read more »

Price Scanner via MacPrices.net

The lowest prices on Apple 13″ MacBook Pros t...
Save $300-$300 on the purchase of a 2017 13″ MacBook Pro this weekend with Certified Refurbished models at Apple. In many cases, Apple’s refurbished prices are the lowest available for each model... Read more
Lowest prices of the Holiday season: 15″ Appl...
Save $360-$420 on the purchase of a 2017 15″ MacBook Pro with Certified Refurbished models at Apple. In many cases, Apple’s refurbished prices are the lowest available for each model from any... Read more
Apple discounts Beats products by up to 30% t...
Apple has Beats by Dr. Dre (BeatsX, Powerbeats3 Wireless, and Beats Solo3 Wireless) on sale for up to 30% off their retail price from now until December 26th: – BeatsX: Was $149.95, now $99 –... Read more
Updated Price Trackers: Macs, iPads, iPhones,...
Scan our Apple Price Trackers for the latest information on sales, bundles, and availability on systems from Apple’s authorized internet/catalog resellers. We update the trackers continuously: – 15″... Read more
How to preorder a new iMac Pro and pay zero s...
B&H Photo and Adorama are accepting preorders on multiple configurations of the new Apple iMac Pro. Both resellers charge sales tax for residents of NY & NJ only, and shipping is free.... Read more
Apple Macs back in stock at Amazon with model...
Amazon has MacBook Pros, MacBook Airs, MacBooks, and iMacs on sale for up to $200 off MSRP as part of their Holiday/Christmas sale. Shipping is free. Note that stock of some Macs may come and go (and... Read more
Apple offering free overnight delivery on all...
Apple is now offering free overnight delivery on all in stock products until 3pm local time on December 22nd. This includes new as well as refurbished computers. Click here for more information. Read more
Beats Holiday sale at B&H, headphones and...
B&H Photo has Beats by Dr. Dre headphones, earphones, and speakers on sale for up to $80 off MSRP as part of their Holiday sale. Expedited shipping is free, and B&H charges sales tax to NY... Read more
Holiday sale: Apple resellers offer 2017 15″...
MacMall has 15″ MacBook Pros on sale for $220-$300 off MSRP, each including free shipping: – 15″ 2.8GHz MacBook Pro Space Gray (MPTR2LL/A): $2179, $220 off MSRP – 15″ 2.8GHz MacBook Pro Silver (... Read more
Holiday sale: Apple resellers offer 13″ MacBo...
B&H Photo has 13″ MacBook Pros on sale for up to $150 off MSRP. Shipping is free, and B&H charges sales tax for NY & NJ residents only: – 13-inch 2.3GHz/128GB Space Gray MacBook Pro (... Read more

Jobs Board

*Apple* Retail - Multiple Positions - Apple,...
Job Description: Sales Specialist - Retail Customer Service and Sales Transform Apple Store visitors into loyal Apple customers. When customers enter the store, Read more
*Apple* Retail - Multiple Positions - Apple,...
Job Description:SalesSpecialist - Retail Customer Service and SalesTransform Apple Store visitors into loyal Apple customers. When customers enter the store, Read more
*Apple* Retail - Multiple Positions - Apple,...
Job Description: Sales Specialist - Retail Customer Service and Sales Transform Apple Store visitors into loyal Apple customers. When customers enter the store, Read more
*Apple* Retail - Multiple Positions - Apple,...
Job Description:SalesSpecialist - Retail Customer Service and SalesTransform Apple Store visitors into loyal Apple customers. When customers enter the store, Read more
*Apple* Retail - Multiple Positions - Apple,...
Job Description: Sales Specialist - Retail Customer Service and Sales Transform Apple Store visitors into loyal Apple customers. When customers enter the store, Read more
All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.